Manual Enviro 828 BV. FS.

20 pages 1 mb
Download

Go to site of 20

Summary
  • Enviro 828 BV. FS. - page 1

    SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY THIS MANUAL IS PRINTED ON RECYCLED PAPER 8 2 8 By SHERWOOD INDUSTRIES LTD. B Vent OWNERS MANUAL Installation And Operating Instructions For Models: 828 BV. FS. (Freestanding) 828 BV. INS. (Insert) PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. WHAT TO DO IF YOU SMELL GAS • Open w ...

  • Enviro 828 BV. FS. - page 2

    SAFETY PRECAUTIONS FOR SAFE INSTALLATION AND OPERATION OF YOUR "ENVIROGAS" ROOM HEATER, PLEASE, CAREFULLY READ THE FOLLOWING INFORMATION: • All "ENVIROGAS" gas-fired appliances must be installed in accordance with these instructions. Carefully read all the instruct ions in this manual first. Consult the building authority havi ...

  • Enviro 828 BV. FS. - page 3

    TABLE OF CONTENTS 1 Code Approvals ............................................................................................................... .................... 3 2 Specifications ............................................................................................................... ...................... 3 3 Dimensions and Clearance ...

  • Enviro 828 BV. FS. - page 4

    FOR INSTALLATIONS ABOVE 2000 FEET • In Canada, these appliances are certified for altit udes of 0-2,000 feet and must be derated by 10% for installation at elevations be tween 2,000 and 4,500 feet. • In the USA, these appliance are certified for elevati ons up to 2,000 feet. For elevations above 2,000 feet, input should be reduced 4% for each 1 ...

  • Enviro 828 BV. FS. - page 5

    4. DECIDING WHERE TO LOCATE YOUR FREESTANDING STOVE 1. The stove should be located out of tr affic and away from f urniture and draperies. 2. This stove should have sufficient access for its safe operation and maintenance. 3. Locate a position where the flue syst em of the stove can be properly installed without damaging the integrity of the buildi ...

  • Enviro 828 BV. FS. - page 6

    * As specified in CGA B149 Installation Codes (1991) Note: Local Codes or Regulations may require different clearances. 5. ASSEMBLY AND INSTALLATION INSTRUCTIONS PREPARATION FOR INSTALLATION • Remove the packaging from the appliance, pedestal or surround panels, check to make sure there is no damage. Carefully check the glass door. Do not use the ...

  • Enviro 828 BV. FS. - page 7

    13. Re-attach the hinged side flaps by sandwiching the surround panels between th e mounting brackets and the hinged side flaps. secure with screws. 14. Re-install the stove top by inserting the locating screws, previously put into the surr ound panel top, through the holes in the back of the stov e top. Push threaded studs through holes in t op ba ...

  • Enviro 828 BV. FS. - page 8

    6. ELECTRICAL REQUIREMENTS The ENVIROGAS 828 Series will operate w it hout an external electrical power supply . This model has a Millivolt gas control which uses the pilot flame to generate enough electricity to operat e the main burners. CAUTION: Label all wires prior to disconnection when servici ng controls. Wiring errors can cause improper and ...

  • Enviro 828 BV. FS. - page 9

    7. GAS LINE CONNECTION AND TESTING WA RNING: Only persons licensed to w ork with gas piping can make the gas connections to this appliance. This appliance is equipped with a 3/8” stainless steel flex line from the valve. This line ma y be routed through the hole in the rear of the pedestal, or on inserts, routed through the fire box sides. An ada ...

  • Enviro 828 BV. FS. - page 10

    8. VENTING WARNING: THIS APPLIANCE HAS BEEN DESIGNED TO OPERATE BY DRAWING COMBUSTION AIR AND DILUTION AIR FROM THE ROOM. IT IS ALSO DE SIGNED TO DRAW ROOM AIR FOR PROPER HEAT CIRCULATION FROM THE SIDES OF THE UNIT. BLOCKING OR MODIFYING THE LOUVERS IN ANY WAY CAN CREATE HAZARDOUS SITUATIONS, EITHER THROUGH POOR VENTING OR BY OVERHEATING. IT IS IMP ...

  • Enviro 828 BV. FS. - page 11

    constructed out of non-combust ible materials. Make sure that all chimney clean outs are tightly fitti ng and will not permit air to leak into the chimney. Remove the vent collar plate from the top of the insert and connect it s ecurely with at least 3 sheet metal screws and a 4" hose clamp. Check for any tears in the liner at this point. (See ...

  • Enviro 828 BV. FS. - page 12

    For best venting perfor mance, we recommend total vent height of 10ft (3m) to 30f t (9m). Total horizontal length depends on the number of elbows used. The venting should never slope down. 1/4" rise per 2' horizontal is recommended. If practical, it is best have shor ter horizontals and fewer elbows. -Two 90 ° elbow, maximum total horizo ...

  • Enviro 828 BV. FS. - page 13

    10. INSTALLATION OF LOG SET and EMBERS A. INSTALLING THE GLOWING EMBERS A bag of ceramic fiber ember s is provided for use on the front burner tray. CAUTION: Use only the type of ember material supplied with this appliance. Due to the irregular size of the ember material there may be more than required. The use of other foreign mat erials on the bu ...

  • Enviro 828 BV. FS. - page 14

    11. OPERATING INSTRUCTIONS FOR YOUR SAFETY READ BEFORE OPERATING WARNING: IF YOU DO NOT FOLLOW THESE INSTRUCTIO NS EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE , PERSONAL INJURY OR LOSS OF LIFE. A) This appliance is equipped with a pilot which must be lit by hand by following these instructions exactly. B) BEFORE LIGHTING smell a ...

  • Enviro 828 BV. FS. - page 15

    12. ROUTINE MAINTENANCE Periodically check to ensure that the "B-Vent" venting system is clear and that a negative draft is pr esent when the unit is operating. On fireplace insert models there is a draft inspection tube the opening is located on the right hand side behind the hinged side. A vacuum should be present at the opening. Period ...

  • Enviro 828 BV. FS. - page 16

    13. TROUBLE SHOOTING Problem Possible Cause Solution Spark will not arc to the pilot after repeated pressing of spark ignitor Defective piezo ignitor Check connections to ignitor -If ignitor connections are good but there is no spark-replace ignitor Broken spark electrode -Check for broken ceramic insulation replace, electrode if broken Miss-aligne ...

  • Enviro 828 BV. FS. - page 17

    14. PARTS AND ACCESSORIES Service Parts available from your local ENVIROGAS Dealer. PART # DESCRIPTION 828-001 Convection Blower 828-002 Heyco Strain Relief 828-003 2-Speed Fan Switch 828-004 Eurosit Manually Regulated Valve, Natural Gas 828-005 Eurosit Manually Regulated Valve, Liquid Propane 828-006 Pilot with Ingitor Electrode, Natural Gas 828-0 ...

  • Enviro 828 BV. FS. - page 18

    18 15. WARRANTY Sherwood Industries Ltd. offer s a *Lifetime Warranty on t his gas product. The lifetime warrant y covers the appliance for a period of seven years f rom the date of installat ion. This warranty applies only to the or iginal owner in the original location Covered under the lifetime warr anty are Cabinet Sides, Tops, Pedestals, Sur r ...

  • Enviro 828 BV. FS. - page 19

    16. INSTALLATION DATA SHEET The following information must be recorded by the inst aller for w arranty purposes and future reference. Envirogas Model: EG-828 INSERT BV. FPI Name of Owner: __________________________________________ Address: __________________________________________ __________________________________________ ________________________ ...

  • Enviro 828 BV. FS. - page 20

    20 ...

Manufacturer Enviro Category Fire Pit

Documents that we receive from a manufacturer of a Enviro 828 BV. FS. can be divided into several groups. They are, among others:
- Enviro technical drawings
- 828 BV. FS. manuals
- Enviro product data sheets
- information booklets
- or energy labels Enviro 828 BV. FS.
All of them are important, but the most important information from the point of view of use of the device are in the user manual Enviro 828 BV. FS..

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Enviro 828 BV. FS., service manual, brief instructions and user manuals Enviro 828 BV. FS.. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Enviro 828 BV. FS..

Similar manuals

A complete manual for the device Enviro 828 BV. FS., how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Enviro 828 BV. FS. by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Enviro 828 BV. FS..

A complete Enviro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Enviro 828 BV. FS. - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Enviro 828 BV. FS., FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Enviro 828 BV. FS., that we can find in the current document
3. Tips how to use the basic functions of the device Enviro 828 BV. FS. - which should help us in our first steps of using Enviro 828 BV. FS.
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Enviro 828 BV. FS.
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Enviro 828 BV. FS. in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Enviro 828 BV. FS.?

Use the form below

If you did not solve your problem by using a manual Enviro 828 BV. FS., ask a question using the form below. If a user had a similar problem with Enviro 828 BV. FS. it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)