Manual Paradyne 6310 MVLT

20 pages 0.22 mb
Download

Go to site of 20

Summary
  • Paradyne 6310 MVLT - page 1

    1 Hotwire r 6310 MVL t Modem Customer Premises Installation Instructions Document Number 6310-A2-GN10-40 February 2000 Contents Hotwire 6310 MVL Modem Overview 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before Y ou Begin 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instal ...

  • Paradyne 6310 MVLT - page 2

    2 Hotwire MVL System Copper pairs run from the central office (CO) to the customer premises (CP) to create the local loop. The local loop terminates on the customer premises at the demarcation point. 98-15930a-02 MVL Modem Customer Premises (CP) MVL/PO TS Ethernet Crossover Cable Ethernet Cable or Central Office (CO) Local Loop Hub MVL – Multiple ...

  • Paradyne 6310 MVLT - page 3

    3 NOTES: In this document: — A telephone is used to represent any equipment that plugs into a phone jack and uses the POTS line, such as a phone, modem, or fax machine. — End-user system is used to represent any PC with an Ethernet connection and MVL-based service. — Service provider is used to represent any Internet Service Provider (ISP) or ...

  • Paradyne 6310 MVLT - page 4

    4 Product-Related Documents T o install a phone filter , refer to the appropriate document: Document Number Document Title 6035-A2-GN1 1 Hotwire 6035 MVL Phone Filter Installation Instructions 6040-A2-GN1 1 Hotwire 6040 MVL Wall Jack Phone Filter Installation Instructions Contact your sales or service representative to order additional product docu ...

  • Paradyne 6310 MVLT - page 5

    5 3. Connect a telephone (optional); go to Step 4 if you are not connecting a telephone to the MVL modem. The 6035 phone filter has a cable attached. Plug the other end of this cable into the MVL modem jack labeled PHONE. Using the existing telephone interface cable that was unplugged in Step 1, plug into the POTS filter jack labeled PHONE. 99-1623 ...

  • Paradyne 6310 MVLT - page 6

    6 H Use an Ethernet crossover cable and connect the other end to a PC with an Ethernet Network Interface Card (NIC) installed. PHONE POWER ETHERNET LINE MVL Modem 98-15907 Ethernet Line PC with Ethernet Network Interface Card Ethernet Cable For MVL modem cable pin assignments, refer to Cables & Connectors on page 10. 5. Insert the supplied powe ...

  • Paradyne 6310 MVLT - page 7

    7 The MVL modem hardware installation is now complete. When the power cord is installed, the MVL modem goes through a power-on self-test. Power -On When power is applied, the MVL modem performs self-diagnostics and the PWR LED is on. The self-diagnostics includes a power-on self-test and all of the LEDs turn on for one second. TST LINE ETHERNET ALM ...

  • Paradyne 6310 MVLT - page 8

    8 Status LEDs All of the LEDs turn on and off during the power-on self-test. After a successful self-test, the LEDs should appear as indicated in BOLD in the Condition column below . LED State Status PWR ON MVL modem has power . ALM OFF ON No active alarms. An alarm condition exists. TST OFF ON No active tests. The TST LED is on during the power-on ...

  • Paradyne 6310 MVLT - page 9

    9 LED Symptom Action LINE LED is off. V erify that the MVL LINE cable is securely installed on both ends. If the problem continues, contact the Service Provider . V erify that the line has dial tone. If there is no dial tone, contact the Service Provider . LINE LED is on and there is no data transmission. The MVL link has been established but there ...

  • Paradyne 6310 MVLT - page 10

    98-15304a 6-Pin RJ11 Plugs Pin #1 Pin #6 10 T o enable the sharing of resources and review security considerations, see Microsoft ’ s Web site at www .microsoft.com . In this example of HomeLink, the PC in the family room could use the office printer . 98-15952a-01 RJ11 W all Jack MVL Modem Office PHONE POWER ETHERNET LINE Hub FA X Ethernet Cable ...

  • Paradyne 6310 MVLT - page 11

    98-16055a 8-Pin Plug Ethernet Cable Pin #1 Pin #8 11 H The Ethernet interface connector uses an 8-pin, non-keyed modular plug. — T o connect the MVL modem to an Ethernet hub, use the straight-through connection. 8-Pin Straight-Through Connection Pin # Function 1 10BaseT TX D+ 2 10BaseT TX D – 3 10BaseT RX D+ 4 & 5 Not used 6 10BaseT RX D ? ...

  • Paradyne 6310 MVLT - page 12

    12 Optional MVL Modem W all Placement The Hotwire 6310 MVL Modem is designed for tabletop placement. The MVL modem can also be mounted on a wall. T o mount the modem, you will need: - Three slotted-head #6 self-threading screws with molly bolts - Drill and 3/16 ” drill bit for the molly bolts - Screwdriver A template with the dimensions for the t ...

  • Paradyne 6310 MVLT - page 13

    13 MVL Modem Hardware T emplate F ront (LEDs) 98-16171 5.43" 7.55" T o Bottom Hole ...

  • Paradyne 6310 MVLT - page 14

    14 Hotwire 6310 MVL Modem T echnical Specifications Item Specification * Height x Width x Depth 1.43 ″ x 6.00 ″ x 8.75 ″ (3.64 cm x 15.24 cm x 22.23 cm) Weight 1 lb. 1 oz. (0.48 kg) Power Class 2 T ransformer normal service input voltage range Input: 100 V ac (+ 10%), 50 Hz; 120 V ac (+ 10%), 60 Hz; or 230 V ac (+ 10%), 50/60 Hz Output: 15 Vd ...

  • Paradyne 6310 MVLT - page 15

    15 ! Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered. 3. Do ...

  • Paradyne 6310 MVLT - page 16

    16 CE Marking When the product is marked with the CE mark on the equipment label, this demonstrates full compliance with the following European Directives: H Directive 73/23/EEC – Council Directive of 19 February 1973 on the harmonization of the laws of the member states relating to electrical equipment designed for use within states relating to ...

  • Paradyne 6310 MVLT - page 17

    17 Declaration of Conformity This Declaration of Conformity is made by Paradyne Corporation pursuant to Parts 2 and 15 of the Federal Communications Commission ’ s Rules. This compliance information statement pertains to the following products: T rade Name: Hotwire Model Number: 6310-A2-200 This device complies with Part 15 of the FCC Rules. Oper ...

  • Paradyne 6310 MVLT - page 18

    18 United States – Notice to Users of the T elephone Network 1. This equipment complies with Part 68 of the FCC rules. On the equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. The label is located on the bottom of your modem. 2. The Hotwire 6310 MVL Mod ...

  • Paradyne 6310 MVLT - page 19

    19 Notice to Users of the Canadian T elephone Network The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate T erminal Equipment T echnical Requirements document(s). The Department does not ...

  • Paradyne 6310 MVLT - page 20

    20 W arranty , Sales, Service, and T raining Information Contact your local sales representative, service representative, or distributor directly for any help needed. For additional information concerning warranty , sales, service, repair , installation, documentation, training, distributor locations, or Paradyne worldwide office locations, use one ...

Manufacturer Paradyne Category Modem

Documents that we receive from a manufacturer of a Paradyne 6310 MVLT can be divided into several groups. They are, among others:
- Paradyne technical drawings
- 6310 MVLT manuals
- Paradyne product data sheets
- information booklets
- or energy labels Paradyne 6310 MVLT
All of them are important, but the most important information from the point of view of use of the device are in the user manual Paradyne 6310 MVLT.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Paradyne 6310 MVLT, service manual, brief instructions and user manuals Paradyne 6310 MVLT. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Paradyne 6310 MVLT.

Similar manuals

A complete manual for the device Paradyne 6310 MVLT, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Paradyne 6310 MVLT by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Paradyne 6310 MVLT.

A complete Paradyne manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Paradyne 6310 MVLT - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Paradyne 6310 MVLT, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Paradyne 6310 MVLT, that we can find in the current document
3. Tips how to use the basic functions of the device Paradyne 6310 MVLT - which should help us in our first steps of using Paradyne 6310 MVLT
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Paradyne 6310 MVLT
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Paradyne 6310 MVLT in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Paradyne 6310 MVLT?

Use the form below

If you did not solve your problem by using a manual Paradyne 6310 MVLT, ask a question using the form below. If a user had a similar problem with Paradyne 6310 MVLT it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)