English dropdown-ico

Manual Rokonet Rokonet ORBIT-6 RP-206

37 pages 0.34 mb
Download

Go to site of 37

Summary
  • Rokonet Rokonet ORBIT-6 RP-206 - page 1

    Installer Manual 1 INSTALLER MANUAL VER. B ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 2

    Installer Manual 2 Customer Information 1. The ORBIT-6 (Model RP-206) complies with FCC Part 68 Rules. On the upper panel of this product is a label that contains, among other information, the FCC Registration Number and Ringer Equivalence Number (REN is 0.8B). If requested, this information must be provided to the Telephone Company. 2. An FCC comp ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 3

    Installer Manual 3 Copyright © 2001 by Rokonet Ltd., 14 Hachoma Street Rishon Letzion 75655 Israel All rights reserved. No part of this document may be reproduced in any form without prior written permission from the publisher. 5IN206IM B ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 4

    Installer Manual 4 Summary of User’s Commands This page, called a Command Summary, is intended to give you brief summaries of common system operations. More detailed explanations and related information can be found within, by referring to the user manual. FUNCTION PROCEDURE System Arming [USER CODE] + [ARM] Stay Home Arming [USER CODE] + [STAY] ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 5

    Installer Manual 5 TABLE OF CONTENTS Introduction to the ORBIT-6 .................................................................. 6 Main Features: .................................................................................. 6 Installation ............................................................................................ 7 Before Y ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 6

    Installer Manual 6 INTRODUCTION TO THE ORBIT-6 The ORBIT-6 is intended to address the needs of many homes, offices, and small businesses. Its operation is designed around microprocessor and EEPROM (Electrically Erasable Programmable Read-Only Memory) technology, which stores, without the need for a source of power, the system’s operating program ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 7

    Installer Manual 7 INSTALLATION Before You Begin Be sure the actual work is performed by experienced personnel, licensed to carry out security system installations and capable of implementing all applicable requirements of the National Fire Protection Association (NFPA-70 and NFPA-74), as well as any federal, state, and local codes–along with any ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 8

    Installer Manual 8 TECHNICAL DATA Main Panel Input power 16.5 V AC 25 VA via transformer Rechargeable standby battery 12 V 4 A-Hours Auxiliary Power 12 V DC 250 mA maximum Bell/LS Sounder output 12 V DC 750mA maximum Programmable output Open collector Active pull down 70mA maximum Cabinet Dimensions: 260X218X83 mm (10.2X5.1X3.3 “) Weight 1.84 kg ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 9

    Installer Manual 9 INSTALLER PROGRAMMING The keypad The Orbit-6 can support up to 4 keypads, with a choice of 3 styles, 1 LCD type and two LED types from which virtually all features may be accessed. In addition to the functions it provides for the user, each of the keypads can be used by an installer to program the system parameters. An attempt to ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 10

    Installer Manual 10 Programming your Orbit-6 Programming Methods Local Requirements LED or LCD keypads The keypad must be wired to the Orbit- 6 panel. Power must be applied to the Orbit-6. Orbit Programmer Easy programming of the control panel parameters with menu driven LCD display. The programmer can store up to 10 Orbit-6 programming sets and co ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 11

    Installer Manual 11 Viewing the Contents of a Location It’s often necessary to check the data stored in a memory location to be sure it’s correct. If improper data is found, it must be corrected in order to obtain the desired system response. The data in a location can either be a number (from 0-9) or a letter (from A-F). Doing so takes advanta ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 12

    Installer Manual 12 Locations Whose Contents Occupy More Than One Digit When a location contains more than one digit, they cannot be viewed simultaneously. As soon as a location is accessed, the first digit is displayed automatically. Additional digits (if they exist) can be displayed by pressing the following keys: Used to display the next digit i ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 13

    Installer Manual 13 Operation Action Comments 1 Enter the Installer Programming mode enter the factory default Installer Code ( 0-2-0- 6 ); followed by # a long beep will sound, confirming successful entry into Installer Programming 2 Access the current Installer Code (stored in location “ 08 ”) press [0] , [ 8 ] , [ARM] no confirming beep will ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 14

    Installer Manual 14 GENERAL SYSTEM PARAMETERS: LOCATIONS 00–05 Location: 00 Default En able : Def: 00 PURPOSE: to enable or disable the option of resetting the system to the factory defaults. 00 Enable the option of resetting the system to the factory defaults. 55 Disable the option of resetting the system to the factory defaults. Location: 0 1 M ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 15

    Installer Manual 15 Location: 04 Callback UD Phone # Enables greater security for remote Upload/Download operation. This is a number to which the alarm company computer, equipped with the U/D software, will be connected. When a call is made from a computer, using U/D software, to the Orbit-6 panel, the system will hang-up and call back using this U ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 16

    Installer Manual 16 Location: 09 Installer Code II Default: 1206 Same as the Installer Code 1, but with a few limitations: It can't modify the "default code", observe and modify the first installer's codes, modify any MS phone number, nor observe & modify MS lock code. Location: 10 Master Code Default: 1234 PURPOSE: to estab ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 17

    Installer Manual 17 Locations: 14- 21 Zone 1-8 : (1 st Digit): Type Default: 1 st Digit Zone Type and Comments 0 Not Used All unused zones should be given this designation. It is also used to disable a zone 1 24-Hour A violation of such a zone will always cause an instant intrusion alarm, regardless of the system’s armed/disarmed state 2 Instant ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 18

    Installer Manual 18 Locations: 14-21 Zone 1-8: (2 nd Digit): Sound Default: 2 nd Digit Zone Sound and Comments 0 Silent a violation during the armed period will produce no sound the resulting alarm can still be reported to the Central Station 1 (default) External Sounder (Continuous) causes the external sounding device to annunciate steadily, witho ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 19

    Installer Manual 19 Location: 18 Zone 5: (2 nd Digit): Sound Default: External Sounder (Pulses) For fire zone the recommended (default) zone sound is “External sounder pulsed” However it is possible to change the zone sound and type to any of the ones provided in the previous list. Location: 19 Zone 6: Tamper Zone Zone 6 is reserved as a Tamper ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 20

    Installer Manual 20 Digit Event and Result 00 (default) Not Active UO offers no response to any system activity 01 Arm Follow (Latch) U0 is activated when the system is armed. The activation occurs after the expiration of the exit/delay period. The U0 remains active (latched) while the system is armed. When disarming the system the U0 deactivates ( ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 21

    Installer Manual 21 17 Special Emergency Keying Follow (Latched) UO is activated immediately when pressing the keypad’s [7] and [8] keys simultaneously for two seconds. U0 is deactivated when the system is disarmed. 18 Special Emergency Keying Follow (Pulsed) UO is activated for several seconds when pressing the keypad’s [7] and [8] keys simult ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 22

    Installer Manual 22 24 Duress Code Follow (Latched) UO is activated when any duress code is entered. The UO deactivates either when arming the system or disarming the system due to an alarm that was activated from the emergecy keypad keys, 24-hour zone violation or tamper zone violation. 25 Follow Chime (Pulse) ( Ver. 1.2) UO is activated for sever ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 23

    Installer Manual 23 Location: 2 6 Dialer Controls: (2 nd Digit): 2 nd Digit Attempts Answering Machine UL Installation Voice Module 0 3 No No No 1 8 No No No 2 3 Yes No No 3 (default) 8 Yes No No 4 3 No Yes No 5 8 No Yes No 6 3 Yes Yes No 7 8 Yes Yes No 8 3 No No Yes 9 8 No No Yes A 3 Yes No Yes B 8 Yes No Yes C 3 No Yes Yes D 8 No Yes Yes E 3 Yes ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 24

    Installer Manual 24 Understanding the Code Format To understand and modify the Code format according to a specific central station see the following • First digit: determine the number corresponding to the desired combination of: Kissoff/Handshake Freq / Message Validation / Extended–Non-Extended Format) • Second digit: determine the number ( ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 25

    Installer Manual 25 Location: 28 CS Protocols: When selecting a contact ID & SIA format, all the reporting codes will be automatically applied to the locations of the reporting codes. To change a code, enter a new code (according to the type of event – see page 30 ) to the corresponding location. When selecting the Pulsed Protocol the default ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 26

    Installer Manual 26 Comments on System Controls (Location 30: 2 nd Digit) Silent Panic Bell Squawk on Arming 3 Minute Bypass Enabled If “NO”, the panic alarm will be AUDIBLE at the External Sounder and visual on the keypad. If “YES”, the panic alarm will be INAUDIBLE at the External Sounder and invisable on the keypad. If selected, Bell Squ ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 27

    Installer Manual 27 System Controls: 1 ST Digit System Controls: 2 nd Digit PERIODIC TEST TIME: LOCATION 31 If desired, the ORBIT-6 can send a daily test transmission to the Central Station to verify the operation of the unit’s Digital Communicator. Location: 31 Periodic Test Time Default: 0000 Sets a fixed, daily time for sending an ORBIT-6 test ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 28

    Installer Manual 28 Other Reporting Codes Location Description Digits Default Report Code 54 Daily test Report Code sent everyday at the time specified in Location 24 2 00 55 User 0 arm (the “Master” Code, “Quick Ar m” OR “Keyswitch” Arm) 2 00 56 User 1 arm Reporting code 2 00 57 User 2 arm Reporting code 2 00 58 User 3 arm Reporting co ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 29

    Installer Manual 29 ORBIT-6 Installer Programming Worksheet Customer ________________________ Address _________________________ City ____________ State _____Zip ___ Customer Phone No: ( ) ___________________ Central Station Account No:___________________ Comments:________________________________ Date of Installation: ________________ Installer(s): ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 30

    Installer Manual 30 CONTACT ID & SIA REPORT CODES FOR ORBIT 6 Event Reporting Contact ID SIA Zones Alarms/Disarm Program Digit Code Program Digit Code Exit/Entry Alarm 01 134 01 BA Exit/Entry Restore 01 134 02 BH Burglary Zone Alarm 03 130 03 BA Burglary Zone Restore 03 130 04 BH 24 Hour Zone Alarm 05 133 05 BA 24 Hour Zone Restore 05 133 06 BH ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 31

    Installer Manual 31 Event Reporting Contact ID SIA Zones Alarms/Disarm Program Digit Code Program Digit Code Low Temperature Alarm/Restore 34 159 34 DA Los of Air Flow 35 161 35 DB Special Special Emergency Key Alarm 4A 100 4A MA Special Emergency Key Restore 4A 100 41 MH Fire Zone Alarm 42 110 42 FA Fire Zone Restore 42 110 43 FH Fire Key Alarm 44 ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 32

    Installer Manual 32 TI P RIN G TELEPHON E SE T TO TELEPHON E LINE TR1 ORBIT-6 Wiring Diagram FIGURE 1 A SET LINE PHO NE UR 1 P 1 J 2 J 1 DEFAUL T TYPICAL FIR E ZONE WIRING S (4 WIRE SMOKE DETECTIONS ) Z5 CO M UO AU X +I N -I N +OU T 12VD C SUPERVISIN G RELAY +OUT ALARM CONTACT END OF LINE RESISTOR S 2,2 K 1/4 WAT T UR 1 UR 1 TO ZONES CONTACT S AUX ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 33

    Installer Manual 33 12VD C 750 m A MAX N/ C CONTACT S TO KEYPAD(S) TI P RIN G TELEPHON E SE T TO TELEPHON E LINE TR1 ORBIT-6 Wiring Diagram FIGURE 1 B S E T L IN E P H O N E UR 1 P 1 J 2 J 1 DEFAUL T TYPICAL FIR E ZONE WIRING S (4 WIRE SMOKE DETECTIONS ) +I N -I N +OU T 12VD C SUPERVISIN G RELAY ALARM CONTACT END OF LINE RESISTOR S 2,2 K 1/4 WAT T ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 34

    Installer Manual 34 Zone Extension Power LED Arm LED Ready LED Fire LED Zone 1 Zone 2 Zone 3 Backlit LEDS Zone 4 Zone 5 Zone 6/Tmp Zone 7 Zone 8 AUX GND CLK DAT WHT RED BLK YEL GRN ( Keypad Buzzer ) Panic Button ∩ ∩ To FIGURE 1C the 8-ZONE KEYPAD BOARD Control Panel Z7 COM Z8 ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 35

    Installer Manual 35 Notes ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 36

    Installer Manual 36 ...

  • Rokonet Rokonet ORBIT-6 RP-206 - page 37

    Installer Manual 37 ROKONET LIMITED WARRANTY Rokonet Electronics, Ltd. and its subsidiaries and affiliates ("Seller") warrants its products to be free from defects in materials and workmanship under normal use for 18 months from the date of production. Because Seller does not install or connect the product and because the product may be u ...

Manufacturer Rokonet Category Smoke Alarm

Documents that we receive from a manufacturer of a Rokonet Rokonet ORBIT-6 RP-206 can be divided into several groups. They are, among others:
- Rokonet technical drawings
- ORBIT-6 RP-206 manuals
- Rokonet product data sheets
- information booklets
- or energy labels Rokonet Rokonet ORBIT-6 RP-206
All of them are important, but the most important information from the point of view of use of the device are in the user manual Rokonet Rokonet ORBIT-6 RP-206.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Rokonet Rokonet ORBIT-6 RP-206, service manual, brief instructions and user manuals Rokonet Rokonet ORBIT-6 RP-206. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Rokonet Rokonet ORBIT-6 RP-206.

Similar manuals

A complete manual for the device Rokonet Rokonet ORBIT-6 RP-206, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Rokonet Rokonet ORBIT-6 RP-206 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Rokonet Rokonet ORBIT-6 RP-206.

A complete Rokonet manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Rokonet Rokonet ORBIT-6 RP-206 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Rokonet Rokonet ORBIT-6 RP-206, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Rokonet Rokonet ORBIT-6 RP-206, that we can find in the current document
3. Tips how to use the basic functions of the device Rokonet Rokonet ORBIT-6 RP-206 - which should help us in our first steps of using Rokonet Rokonet ORBIT-6 RP-206
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Rokonet Rokonet ORBIT-6 RP-206
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Rokonet Rokonet ORBIT-6 RP-206 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Rokonet Rokonet ORBIT-6 RP-206?

Use the form below

If you did not solve your problem by using a manual Rokonet Rokonet ORBIT-6 RP-206, ask a question using the form below. If a user had a similar problem with Rokonet Rokonet ORBIT-6 RP-206 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)