-
Novatel GNSS Receiver and Antenna SMART-AG - page 1
OM-20000123 Rev 2 SMART-AG User Manual ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 2
2 SMART -AG User Manual Rev 2 SMART -AG User Manual Publicat ion Number: OM-20000123 Revision Level: 2 Revision Date: 200812/08 Firmware Version: 3.600 or higher Propriet ary Notice Information in this docu ment is subject to change without noti ce and does not represent a commitment on the part of NovAtel Inc. The software described in this docume ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 3
SMART-AG User Manual Rev 2 3 T able of Content s Customer Service 15 Foreword 16 Congratulations! ........... ............. ................. ............ ............. ................. ............ .......... 16 Scope ............... ............ ............. ................. ............ ............. ............. ................ .......... ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 4
4 SMART-AG User Manual Rev 2 T able of Contents 4.4 Firmware Upgrades .... ............. ................ ............. ............. ................ ............. ...... 44 4.4.1 Upgrading U sing the AUTH Command ....... ................ ............. ................ ... 44 4.4.2 Updating Using the WinLoad Utility ...................... ........ ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 5
SMART-AG User Manual Rev 2 5 Ta b l e s 1 SMART-AG Controller Models ................................................................................... 19 2 SMART-AG Connector Pin-Out ............................................................. .................... 21 3 Default Port Configurations ................................................. ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 6
6 SMART-AG User Manual Rev 2 Figures 1 SMART-AG Receiver ....................................................................................................... 18 2 SMART-AG Connector ..................................................................................................... 20 3 Simplified SMART-AG Setup ................................ ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 7
SMART-AG User Manual Rev 2 7 Sof tware License Softwa re Licens e BY INST ALLING , COPYING , OR OTHER WISE USING THE SOFTW ARE PRODUCT , YOU A GREE TO BE BOUND BY THE TERMS OF THIS AGRE EMENT . IF YOU DO NOT AGREE WITH THESE TERMS OF USE, DO NOT INST ALL, COPY OR USE THIS ELECTRONIC PRODUCT (SOFTW ARE, FIRMW ARE, SCRIPT FILES, OR OTHER ELECTRONIC P ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 8
8 SMART-AG User Manual Rev 2 Soft ware License ware from unauthorized disclosure or use. 5. T erm and T ermination : This Agreement and the rights and li cences hereby granted shall continue in force in perpetuity unless terminated by NovAtel or Licens ee in accordance herewith. In the event that the Licensee shall at any time during the term of th ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 9
SMART-AG User Manual Rev 2 9 Wa r r a n t y Warra nty NovAtel Inc. warrants that its pr oducts are free from defects in mate rials and workmans hip, subject to the conditions set forth below, for the followi ng periods of time, from the date of sale: SMAR T -AG One (1) Y e ar Antenna One (1) Y ear Cables and Accessories Ninety (90) Days Computer Di ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 10
10 SMART-AG User Manu al Rev 2 Sof tware License Standard T erms and Conditions of Sales 1. PRICES: All prices are Firm Fixed Price, FCA 1120 - 68th Avenue N.E., Calgary, Alberta. All prices incl ude standard comm ercial packing for domestic shipment. All transportation, insurance, special packing costs and expenses , and all Federal, provincial an ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 11
T erms and Conditions SMART-AG User Manual Rev 2 11 NovAtel in writing to be confiden tial and shall not disclose it without NovAtel's prior cons ent in writing to any third party or use it other th an for the operation and maintenance o f any Equipment provided. 5. GENERAL PROVISIO NS: All Purchase Orders are subject to approval and acceptanc ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 12
12 SMART-AG User Manual Rev 2 T erms and Conditions consent from NovAtel, (vii) Products designat ed by NovAt el as beta site test samples, experimental, developmental, preproduction, sa mple, incomp lete or out of specification Products, (viii) returned Produc ts if the original identification marks have been removed or altered or (ix) Services or ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 13
SMART-AG User Manual Rev 2 13 Notice Notice The following notices apply to the SMA R T - AG . For more information on emissions testing, please refer to the regulatory body in your geographic area. For example, in the US that is the Federal Communications Commis sion (FCC) and in Eu rope the Conformité Européenne (CE). FCC NOTICES This device com ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 14
14 SMART-AG User Manual Rev 2 Notice WARNING: This is a Class A product. In a do mestic environment this product m ay cause radio interference in which case the user may be required to take adequate m easures. "Hereby, NovAtel Inc. declar es that thi s SMART-AG is in compliance with the essential req uirements and other relevant provisions of ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 15
SMAR T -AG User Manual Rev 2 15 Customer Service Customer Servic e OEMV FIRMWARE UPGRADES Firmware upgrades are fi rmware releases, which increase basic f unctionality of the receiver from one model to a higher level mode l type. When available, upgrade s may be pur chased at a p rice, which i s the dif ference between the two model types on the cu ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 16
16 SMART -AG User Manual Rev 2 Foreword Foreword Congratulations! Congratulations on your purchase of the SMAR T -AG , a GPS L1 plus GLONASS L1 receiver and antenna with exceptional fl exibility and performance. NovAtel is an industry leader in state-of-the-art Global Navigation Satellit e Systems (GNSS) receiver design. W e believe that our SMAR T ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 17
Foreword SMART - AG User Manual Rev 2 17 Conventions Some simple conventions used in thi s manual are: This is a notebox that contains important info rmation. • The letter H in the Offset columns of the commands and logs tables represents the header length for that comm and or log. Refer to th e OEMV Family Firmwar e Refer ence Manual for ASC ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 18
18 SMART -AG User Manual Rev 2 Chapter 1 Introduction The SMAR T -AG is a high-performance GNSS recei ver and antenna, capable of receiving and tracking different comb inations of GPS L1 and GLONASS L1 code and carrier on a maximum of 36 channels. SBAS (Satellit e Based Augmentati on Systems include W AAS, EGNOS, and MSAS) support is stand ard and ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 19
Introduction Chapter 1 SMART - AG User Manual Rev 2 19 T able 1: SMART -AG Controlle r Models Refer also to the OEMV Family Installa tion and Operatio n User Manual for information on receiver communications and operation. Model Name Firmware Feature SMART-V1-PVT GPS L1 only Autonomous, SBAS, or DGPS positions with emul ated radar output SMART-V1-P ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 20
20 SMART -AG User Manual Rev 2 Chapter 2 Inst allation and Setup This chapter contains instructio ns and tips to set up your SMAR T - AG to create a GNSS receiver system. 2.1 Additional Equipment Required In order for the receiver to pe rform optimally , the following additional e quipment is required: • A PC/laptop (user-supplied) • A means of ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 21
Installation an d Setup Chapter 2 SMART - AG User Manual Rev 2 21 T able 2: SMART -AG Connector Pin-Out 3. T urn on the power supply to the SMAR T -AG (the SMAR T -AG cable is also a power cable). The power LED on the back of the receiver glow s red when the SMAR T -AG is properly powered. Figure 3: Simplifi ed SMART -AG Setup Pin Use Pin Use 1 COM ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 22
22 SMART -AG User Manual Rev 2 Chapter 2 Inst allation and Setup Minimum conducto r size for all wiring is 0.5 mm / 20 A WG 2.1.2 Installing th e PC Utilities Once the SMAR T -AG is connected to the PC/lap top and a power supply , install No vAtel’ s PC Utilities . These include CDU , a graphical user interface program. 1. S tart up the PC/la ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 23
Installation an d Setup Chapter 2 SMART - AG User Manual Rev 2 23 tape attached, or mounting hole s at each corner of the plate. 2.1.5 Mounting the SMAR T -AG The SMAR T -AG is a single-frequ ency GNSS receiver and antenna. When installing the SMAR T -AG: • Choose a location th at has a clear view of the sk y so that each satellite ab ove the hor ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 24
24 SMART -AG User Manual Rev 2 Chapter 2 Inst allation and Setup T able 4: SMART -AG LED St atus Indica tors Flashing means that the LED is turning on and off at a 1 HZ rate - 0.5 seconds on and 0.5 seconds off. Debugging: • If the power is on but the yellow LED doesn’t flash within one minute, then no satellites are tracking. There may be exce ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 25
Installation an d Setup Chapter 2 SMART - AG User Manual Rev 2 25 2.2.4 Emulated Radar (ER) The SMAR T -AG outputs an emulated RADAR sign al via the bare wires labeled ER GND and ER_OUT on the SMAR T -AG cable. See T able 7 on Page 54 for the pin-out details of this cabl e. The ER outputs a log ic high of supply v oltage-0.5V minimu m and logic low ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 26
26 SMART -AG User Manual Rev 2 Chapter 3 Operation Before operating the SMAR T -AG for the first time, please ensure that you have follo wed the installation inst ructions in Chapter 2, Installation and Setup starting on Page 20. The following instructions are based on a COM port configuration such as that shown in Figure 5 on Page 30 . It is assum ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 27
Operation Chapter 3 SMART - AG User Manual Rev 2 27 3.1.2 Communicating Usi ng a Remote T erminal One method of communicating with the receiver is through a remote terminal. The receiver has been pre-wired to allow proper RS-232 interface with y our data termin al. T o communicate with the terminal the receiver onl y requires the RX, TX, and GND li ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 28
28 SMART -AG User Manual Rev 2 Chapter 3 Operation Refer to CDU ’ s Help file by selecting t he Help | Contents menu. Ensure you can see the Console and ASCII Messages windows by selecting th em from the Vi e w menu. When the receiver is first turned on, no data is transmitted from the CO M ports except for the port prompt. The Console window dis ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 29
Operation Chapter 3 SMART - AG User Manual Rev 2 29 and [carriage return] indicates that you shou ld press the <Enter> key . The above example illustrates co mmand input to the base receive r ’ s COM2 port, which sets the position of the base station receiver for dif feren tial operation. Confirmati on that the command was actually accepted ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 30
30 SMART -AG User Manual Rev 2 Chapter 3 Operation Figure 5: Basic Dif ferentia l Setup Reference Descriptio n 1 SMAR T -AG receiver 2 User-supplied power supply , for example a battery 3 User-supplied device to COM1 4 User-supplied radio de vice to COM2 5 User-supplied PC/laptop, for setting up an d monitoring, to COM1 System biases can introduce ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 31
Operation Chapter 3 SMART - AG User Manual Rev 2 31 3.3.1 Base S tation Configuration At the base station, ente r the following commands: interfacemode port rx_type tx_type [responses] fix position latitu de longitude height log port messag e [trigger [period]] For example: RT C A interfacemode com2 none rtca off fix position 51.1 1358042 -114.0435 ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 32
32 SMART -AG User Manual Rev 2 Chapter 3 Operation 3.3.2 Rover S tation Configuration At the rover station, enter: interfacemode port rx_type tx_type [responses] For example: RT C A interfacemode com2 rtca none off RT C M interfacemode com2 rtcm none off RT C M V 3 interfacemode com2 rtcmv3 none off CMR+ interfacemode com2 cmr none off CMR interfac ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 33
Operation Chapter 3 SMART - AG User Manual Rev 2 33 pdpmode relative auto The following command is recommended to enable CAN: setcanname 305 NovAtel has reg istered manufactured ID cod e 305 wit h J1939. Wh en complete, your co nfiguration can be saved with the SA VE CONFIG command. See the OEMV Family Firmwa r e Refer ence Ma nual and APN-050 SMAR ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 34
34 SMART -AG User Manual Rev 2 Chapter 3 Operation for system debuggi ng purposes. These variants have "DA T A" as part of their names (for example, R TCADA T A1, R TCMDA T A1, CMRDA T AOBS, and more). Refer also to the OEMV Firmware Refer ence Manual , which describes the various message formats in more detail. Information on how to ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 35
SMAR T -AG User Manual Rev 2 35 Chapter 4 PC Utilities V isit the Firmware and Software Updates section of the NovAtel website, www .novatel.com , for the most recent versions of the PC software and receiver firmware. 4.1 CDU/Convert Inst allation The CD accompanying this manual contains the W indows applications CDU (Contro l and Display Unit) and ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 36
36 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities 4.2 CDU CDU is a 32-bit W indows applicatio n. The application provides a gr aphical user interface (GUI) to allow you to set-up and monitor the operation of the NovAtel receiver by providing a series of windows whose functi onality is explained in t h is section. A help file is i ncluded with C ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 37
PC Utilities Chapter 4 SMART - AG User Manual Rev 2 37 horizon to directly overhead, re spectively . The azimuth is mapped on a compass relative to true North. The colored rings indicate the lowest elevation cut-off angles at which satellites are tracked and can be changed or viewed via the button. Each of the satellites being track ed are repres e ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 38
38 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities valid). Normally this represents the latency in the correction data. • The number of satellites used in the so lution • The Solution Status • The receiver's date and time (GMT and local) Open this window by sel ecting Position W indow from the V iew menu or its button in the W indow T ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 39
PC Utilities Chapter 4 SMART - AG User Manual Rev 2 39 subsequent positions, shown with a yell ow + marker , are given relative to this initial starting point. The current position is shown with a red + marker . The buttons at the top of the window prov ide options for controlling the pl an display: • Zoom in or out of the Plan window • V iew a ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 40
40 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities This window automatically opens when CDU is first connected to a receiver . T o bring the window to the front, select Conso le W indow from the V i ew menu or click its button in the W indow T oolbar . • Logging Control W indow : The Logging Control window pr ovides a graphical interface for: ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 41
PC Utilities Chapter 4 SMART - AG User Manual Rev 2 41 4.3 Convert Convert is a 32-bit W indows application and is shown in Figur e 6 . Convert will accept GPS file formats and convert them to ASCII, Bin ary or Rine x format. The application al so allows the user to screen out particular logs by selecting the desired lo gs from the list of availabl ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 42
42 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities The Convert4 utility can be used to produce RINEX files from NovAte l receiver data files. Although RINEX is intended to be a receiver- independent format, there are many optional records and fields. Please keep this in mi nd when combining NovAtel and non-NovAt el RINEX data . When converti ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 43
PC Utilities Chapter 4 SMART - AG User Manual Rev 2 43 T able 6: NovAtel Logs for Rinex Conversion 4.3.2 Convert Command Line Switches Convert4 supports several command-line switches to facilitate batch pro cessing. T o access its Command Line Arguments window , open a command prompt window (select Accessories | Command Prompt from the Start menu). ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 44
44 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities The name of the output file is the same as the input file when convertin g to ASCII or binary formats. The file extension, however , is altere d to indicate the format of the data: *.asc for ASCII *.bin for binary When converting to RINEX, the output files are named according to the RINEX V ersi ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 45
PC Utilities Chapter 4 SMART - AG User Manual Rev 2 45 various model features. Use this command when upgrading to a higher performance OEMV family model available within the same revision level as your current model (for ex ample, upgrading from a SMAR T -AG to a SMAR T -AG-ER on firmware versi on 3.600). This comm and only functions in conjunction ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 46
46 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities Y ou will need at least 1 MB of av ailable space on your hard drive. For convenience, you may wish to copy this file to a GPS sub -directory (for example, C:GPSLOADER). The file is available in a compressed format with password protection ; Customer Service w ill provide you with the required ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 47
PC Utilities Chapter 4 SMART - AG User Manual Rev 2 47 If you are running W inLoad for the first time you will need to make sure the file and com munications settings are correct. Open a File to Download From the file menu choo se Open . Use the Open dialog to browse for your file, see Figure 9, W inLoad’ s Open Dialog on Page 47 . Figure 9: WinL ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 48
48 SMART -AG User Manual Rev 2 Chapter 4 PC Utilities Figure 1 1: COM Port Setup Downloading firmware T o download firmware follow these steps: 1. Set up the communications port as described in Communicat ions Settings above . 2. Select the file to download, see Open a File to Downlo ad on Page 47. 3. Make sure the file path and file name are displ ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 49
PC Utilities Chapter 4 SMART - AG User Manual Rev 2 49 Figure 14: Upg rade Process Complet e 8. Close W inLoad. This completes the procedure required to upgrade an OEMV family receiver . ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 50
50 SMART -AG User Manual Rev 2 Appendix A T echnical S pecifications A.1 Smart-AG Receiver Performance PERFORMANCE (Subject To GPS System Characteristics) Position Accuracy a Standa lone: L1 1.8 m RM S SBAS b 0.6 m R M S DGPS 0.45 m RMS RT-20 0.20 m RM S Pos t P roc ess ed 5 m m + 1 ppm R MS Time To First Fix Hot: 35 s (Al manac and rec ent ephemer ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 51
T echnic al Specifications Appendix A SMART - AG User Manual Rev 2 51 A.2 SMART -AG Specifications INPUT/OUTPUT CONNECTORS SMART-AG COM/PWR +8 to +36 V DC at 2.5 W (typical while logging) a For the cable pinouts and drawings, see Section A.2.1, SMAR T -AG Power/Communications Development kit Cable starting on Pa ge 53 a. When tracking GPS satelli t ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 52
52 SMAR T -AG User Manual Rev 2 Appendix A T echnical Specifica tions DIMENSIONS a a. All dimension are in millimeters, please use the Unit Conversion section of the GPS+ Refer ence Manual for conversion to other measurements. 155.0 155.3 66.8 26.94 21.85 26.94 26.94 26.94 31.21 #8-32 TH R EA D E D I NSER T ( 4 PL. ) Back of SMART -AG unit F ront o ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 53
T echnic al Specifications Appendix A SMART - AG User Manual Rev 2 53 A.2.1 SMAR T -AG Power/Communicat ion s Development kit Cable The SMAR T -AG cable that accompanies the SMAR T -AG , see Figu r e 15 below , provides a means of supplying power from a battery while operatin g in the field. The exposed wires (red for positive and black for negativ ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 54
54 SMAR T -AG User Manual Rev 2 Appendix A T echnical Specifica tions T able 7: SMART - AG Cable Pinout s A.2.2 SMAR T -AG Connector and Cable Requirements Custom cables for installing your SMAR T -AG can be created using he following guidelines: • W ire size: must be 0.5 mm-1.25 mm (20-16 A WG) • Batt + connection must be protected by 5A fast ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 55
T echnic al Specifications Appendix A SMART - AG User Manual Rev 2 55 • Serial data signals (TxD, RxD, signal ground) must be run in shielded cable. Connect shie lds to gro und at SMAR T -AG end only • CAN signal conductors must be tw isted (40 twists/m, 12 twists/ft) • Use only the recommended mat ing connector s listed below . Use only gold ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 56
56 SMAR T -AG User Manual Rev 2 Appendix A T echnical Specifica tions T able 9: Recommended Fuse and Fus e Holders Fuse Recommended Fuse/F use Holder 12 V Fuse (standard size blade) A TO Blade Fuse 5A Littelfuse 0257005 Or Equivalent 12 V Fuse (mini size blade) Mini Blade Fuse 5A Littelfuse 0297005 Or Equivalent 24V Fuse (standard size blade) T AC ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 57
SMAR T -AG User Manual Rev 2 57 Appendix B Commands The SMAR T -AG firmware implements the commands in Ta b l e 1 0 , in addition to the OEMV family command set. The LOG command is available to all OEMV recei vers but is an esse ntial command to do any logging. It is included in this appen dix for your convenience. T able 10: SMART -AG Commands in ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 58
58 SMAR T -AG User Manual Rev 2 Appendix B Commands B.2 FRESET Clear Selected Dat a from NVM and Reset The OEMV fr eset command is extended to include SMAR T -AG features. An additio nal target field, user data (value = 10), resets only the SMAR T -AG user data NVM, thereby resetting all parameters indicated in this document as “S tored in NVM” ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 59
Commands Append ix B SMART - AG User Manual Rev 2 59 B.3 LOG Request Logs from the Receiver Many different types of data can be logged using several different methods of triggeri ng the log events. Every log element can be directed to any combination of the three COM ports and three USB ports. The ONTIME trigger option requires the addition of the ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 60
60 SMAR T -AG User Manual Rev 2 Appendix B Commands Abbreviated ASCII Syntax:Message ID: 1 LOG [port] message [trigger [period [offset [hold]]]] Factory Default: log com1 rxstatuseventa onnew 0 0 hold log com2 rxstatuseventa onnew 0 0 hold log com3 rxstatuseventa onnew 0 0 hold log aux rxstatuseventa onnew 0 0 hol d log usb1 rxstatuseventa onnew 0 ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 61
Commands Append ix B SMART - AG User Manual Rev 2 61 Field Field Name ASCII Value Description Field Type 1 LOG (ASCII) header - This field contains th e command name or the message header depending on whether the command is abbrevia ted ASCII or ASCII respectively. - 2 port See Table 12, Detailed Serial Port Identif iers on Page 62 Output port (def ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 62
62 SMAR T -AG User Manual Rev 2 Appendix B Commands T able 12: Detaile d Serial Port Identifiers ASCII Port Name Hex Port Value Decimal Port Value a Description NO_PORTS 0 0 No ports specified COM1_ALL 1 1 All virtual ports for COM port 1 COM2_ALL 2 2 All virtual ports for COM port 2 COM3_ALL 3 3 All virtual ports for COM port 3 THISPORT_ALL 6 6 Al ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 63
Commands Append ix B SMART - AG User Manual Rev 2 63 THISPORT_31 df 223 Current COM port, virtua l port 31 FILE c e0 c 224 c User-specified fi le destination, 0 c FILE_1 c e1 c 225 c User-specified file destina tion, 1 c . . . FILE_3 1 c ff c 255 c User-specified file destinati on, 31 c XCOM1 1a0 416 Virtual COM1 port, virtual port 0 XCOM1_1 1a1 41 ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 64
64 SMAR T -AG User Manual Rev 2 Appendix B Commands B.4 RADARCFG C onfigure the ER Output Use this command to configure th e Emulated Radar (ER) output. ER is available through the SMAR T - AG multi-cable, see Page 54 for pin-out details. Syntax radarcfg switch freq_step update_rate resp_mode threshold Message ID = 8192 Field Data Description Bytes ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 65
Commands Append ix B SMART - AG User Manual Rev 2 65 T able 13: Response Modes Example 1 to disable radar emulation: radarcfg disable 26.11 1 1 2 Example 2 to set the freque ncy step to 36.1 1 Hz/kph: radarcfg enable 36.11 1 1 2 Mode Description 2000 2000 ms The time period o ver which to smooth velocity samples 1000 1000 ms 500 500 ms (d efault) 2 ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 66
66 SMAR T -AG User Manual Rev 2 Appendix B Commands B.5 RESET Perform a Hardware Reset The OEMV re s e t command is extended to include SMAR T -AG features. ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 67
SMAR T -AG User Manual Rev 2 67 Appendix C Logs The SMAR T -AG firmware generates the logs in T able 14 , in addition to those of the OEMV Family log set. Refer to the OEMV Family Firmwar e Refer ence Manual , which also contain s procedures and explanations related to data loggin g and is available from our websit e at: http://www .novat el.com/su ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 68
68 SMAR T -AG User Manual Rev 2 Appendix C Logs C.1 RADARSIGNAL ER Signal and Position Information This log contains positio n and Emulated Radar (ER) signal informatio n. Message ID: 8193 Log Type: Asynch Recommended Input: log radarsignala onchanged ASCII Example 1 (stationary SMART-AG): #RADARSIGNALA,COM1,0,61.5,FINESTEERING,1501,248381.628,0000 ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 69
Logs Appendix C SMART - AG User Manual Rev 2 69 T able 15: Position or V elocity T ype Type (bin ary) Type (ASCII) Description 0N O N E N o s o l u t i o n 1 FIXEDPOS Position has been fix ed by the FIX POSITION command 2 FIXEDHEIGHT Position ha s been fi xed by the FIX HEIGHT/AUTO comma nd 8 DOPPLER_VELOCITY Velocity computed using instantaneous D ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 70
70 SMAR T -AG User Manual Rev 2 Appendix C Logs T able 16: Solution St at us Solution Status Description (Binary ) (ASCII) 0 SOL_COMPUTED Solution computed 1 INSUFFICIENT_OBS Insufficient observations 2 NO_CONVERGENCE No convergence 3 SINGULARITY S ingularity at parameters matrix 4 COV_TRACE Covariance trace exceeds maximum (trace > 1000 m) 5 TE ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 71
Logs Appendix C SMART - AG User Manual Rev 2 71 C.2 VERSION HW & SW V ersions and Serial Numbers The Component T ype of the VERSION log, refer to the OEMV Family Firmwar e Refer ence Manual , is extended to include SMAR T -AG information as in T able 17 . T able 17: Component T ype Binary Value a a. Unused numbers are reserved for future use. A ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 72
72 SMART -AG User Manual Rev 2 Appendix D Replacement Part s The following are a list of the replacement parts available for your NovAte l SMAR T -AG receiver . Should you require assistance, or need to order addi tional components, please con tact your local NovAtel dealer or Customer Service representative. D.1 SMART -AG D.2 Accessories The a ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 73
SMART - AG User Manual Rev 2 73 Index A accuracy position , 29 , 50 velocity , 50 almanac , 58 antenna internal , 18 mounting , 23 single-frequency , 23 specifications , 51 ascii , 41 AUTH command , 44 authorization , 45 AUX port , 63 B base station , 33 baselin e , 29 baud rate , 26 bidirectional communication , 27 Bluetooth , 21 buffer , 26 , 59 ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 74
74 SMAR T -AG User Manual Rev 2 Index log , 59 – 60 NVM , 58 port , 23 , 26 start , 27 – 28 storage device , 30 terminal , 27 Warning , 29 DC power , 51 dealer , 15 , 44 default factory , 58 interface mode , 33 log , 60 offset , 61 period , 61 port , 23 , 26 , 59 – 61 reset , 58 trigger , 61 differential configuration note , 33 corrections , ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 75
Index SMART -AG User Manual Rev 2 75 N note, logging , 59 Notices , 13 NovAtel Inc. , 2 , 15 O operation , 26 optionality , 17 output connector , 51 convention , 17 log , 59 – 61 status , 27 – 28 syntax , 57 overload , 59 P parity , 26 PC power setti ngs , 60 period , 59 , 61 port COM , 20 , 26 , 28 , 33 identifier , 62 – 63 interface mode , ...
-
Novatel GNSS Receiver and Antenna SMART-AG - page 76
OM-2000012 3 Rev 2 2008/12/16 ...
Do you have a question concerning Novatel GNSS Receiver and Antenna SMART-AG?
Use the form below
If you did not solve your problem by using a manual Novatel GNSS Receiver and Antenna SMART-AG, ask a question using the form below. If a user had a similar problem with Novatel GNSS Receiver and Antenna SMART-AG it is likely that he will want to share the way to solve it.