English dropdown-ico

Manual Novatel GM-14915118

12 pages 0.51 mb
Download

Go to site of 12

Summary
  • Novatel GM-14915118 - page 1

    1 MEMS Interface Card GM-149151 18 Rev 4 December 2013 QUICK ST ART GUIDE This guide provides the basic infor mation needed to set up and use your new NovAtel ® MEMS Interface Card (MIC). For more detailed information on the installation and oper ation of your MIC, download the SP AN on OEM6 User Man ual from our web site at www .novatel.com . BOX ...

  • Novatel GM-14915118 - page 2

    2 IMU SETUP S Figure 1: MIC to OEM-IMU-ADIS-1 6488 (OEM Cable Kit: 01 019007) Figure 2: MIC to OEM-IMU-HG17 00 (OEM Cable Kit: 01018868) Figure 3: MIC to OEM-IMU-HG19 00 (OEM Cable Kit: 01018871) Figure 4: MIC to OEM-IMU-HG19 30 (OEM Cable Kit: 01018869) MIC Cable (0101900 8) MIC to IMU Interface IMU IMU Mounting PCB (01019053) Interfac e Cable MIC ...

  • Novatel GM-14915118 - page 3

    3 Figure 5: MIC to OEM-IMU-STIM300 (OEM Cable Kit: 010191 74) INST ALL THE MIC IN A ST ACK UP CONFIGURATION In a stack up config uration, the MIC is co nnec ted directly to an OEM615 receiver . Power and communications connectio ns to the receiver are made through the MIC. Ref Connector Part Number Mating Connector Description 1 P101 43650-0313 (Mo ...

  • Novatel GM-14915118 - page 4

    4 Complete the following step s to connect and power your MIC and OEM615. 1. Attach the IMU mounting PCB to the IMU. Ensure all the pins on the header are aligne d with the holes on the mating connecto r . 2. Mount the IMU an d antenna secu rely to a vehicle. For the simplest operation, align th e Y -axis of the IM U with the forward axis (directio ...

  • Novatel GM-14915118 - page 5

    5 4. Connect the antenna cable to th e antenna jack (J1 01) on the OEM615. The antenna ca ble must have a right a ngle MCX conn ector on the end th at connects to the OEM615. 5. Align the OEM615 mating connector (J301) on the MIC with the 20-pin header (P1 101) on the OEM615. Make sure all of the pin s on the header are aligned with the holes in th ...

  • Novatel GM-14915118 - page 6

    6 INST ALL THE MIC IN A ST ANDALONE CONFIGURATION In a standalone con figuration, the MIC and OEM6 receiver are mounte d separate ly . Ref Connector Part Number Mating Connector Description 1 P101 43650-0313 (Molex) 43645-0300 (Molex) Connects to the MIC power supply (user supplied cable) 2 P601 53780-2070 (Molex) 51146-2000 (Molex) Connects to HG1 ...

  • Novatel GM-14915118 - page 7

    7 Complete the following step s to connect and powe r your MIC. 1. Attach the IMU mounting PCB to the IMU. Ensure all the pins on the header are aligned with the holes on the mating connecto r . 2. Mount the IMU an d antenna secu rely to a vehicle. For the simplest operation, align th e Y -axis of the IM U with the forward axis (direction of travel ...

  • Novatel GM-14915118 - page 8

    8 8. Using a customer supplied wiring ha rness, connect a power supply to the OEM6 family receiver . See the OEM6 Family Installation and Operation User Manual for information about connecting power to an OEM6 family receiver . 9. Using a customer supplied wiring ha rness, connect the MIC serial port to a serial port on the OEM6 receiver . See the ...

  • Novatel GM-14915118 - page 9

    9 CONFIGURE THE SP AN ® SYSTEM Follow these steps to enable INS as par t of the SP AN system using sof tware commands: 1. Establish a connection to the OEM6 receiver . Refer to the rec eiver Quick S t art Guide for informat ion about connecting to the receiver and entering commands. 2. Issue the CONNECTIMU command to specify the type of IMU and th ...

  • Novatel GM-14915118 - page 10

    10 3. Enter the distance from the IMU to the GNSS antenna using the SETIMUTOANT OFFSET command. The X (pitch), Y (roll) and Z (azimuth) d irections are clearly marked on the IMU enclosure. The SETIMUTOANT OFFSET parameters are (where the st andard deviation fields are optional): x_offset y_offset z_offset [x_stdev] [y_stdev] [z_stdev] A typical RTK ...

  • Novatel GM-14915118 - page 11

    11 OPERATE THE SP AN SYSTEM The system is ready to go once it is powered and th e INS and GNSS are configured using the pr eviously shown comm ands. Observe th e status of the sy stem in the NovAtel Connect INS Window or in the status field of any of the INS solution logs (for example INSPOS, INSVEL, INSA TT and INSPV A). If performing a static ali ...

  • Novatel GM-14915118 - page 12

    12 POST-PROCESS DATA Post-processing re quires collection of simulta neous dat a from the base and rover stations. This includes accurate co ordinates o f the base station and ac cura te measurement of the IM U to antenna separation. Collect the following dat a fo r post-processing: • From the base station • RANGECMPB ontime 1 • RA WEPHEMB on ...

Manufacturer Novatel Category Network Card

Documents that we receive from a manufacturer of a Novatel GM-14915118 can be divided into several groups. They are, among others:
- Novatel technical drawings
- GM-14915118 manuals
- Novatel product data sheets
- information booklets
- or energy labels Novatel GM-14915118
All of them are important, but the most important information from the point of view of use of the device are in the user manual Novatel GM-14915118.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Novatel GM-14915118, service manual, brief instructions and user manuals Novatel GM-14915118. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Novatel GM-14915118.

Similar manuals

A complete manual for the device Novatel GM-14915118, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Novatel GM-14915118 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Novatel GM-14915118.

A complete Novatel manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Novatel GM-14915118 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Novatel GM-14915118, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Novatel GM-14915118, that we can find in the current document
3. Tips how to use the basic functions of the device Novatel GM-14915118 - which should help us in our first steps of using Novatel GM-14915118
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Novatel GM-14915118
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Novatel GM-14915118 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Novatel GM-14915118?

Use the form below

If you did not solve your problem by using a manual Novatel GM-14915118, ask a question using the form below. If a user had a similar problem with Novatel GM-14915118 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)