English dropdown-ico

Manual Paradyne 5620 RTU

20 pages 0.23 mb
Download

Go to site of 20

Summary
  • Paradyne 5620 RTU - page 1

    TM 1 Hotwire  5620 RTU Customer Premises Installation Instructions Document Number 5620-A2-GN10-30 December 1998 Before Y ou Begin The Hotwire  5620 RTU (Remote T ermination Unit) interoperates with the Hotwire 8510 DSL Card in the DSLAM (Digital Subscriber Line Access Multiplexer) system. An optional POTS (Plain Old T elephone Service) split ...

  • Paradyne 5620 RTU - page 2

    2 Package Checklist V erify that your package contains the following: - Model 5620 Remote T ermination Unit (RTU) - DSL interface cable with RJ1 1 connectors - Power cord with power transformer - T wo ferrite chokes What Does the Hotwire RADSL R TU Do? The Hotwire 5620 RTU is a component in the Hotwire DSL Access System. This system provides high-s ...

  • Paradyne 5620 RTU - page 3

    3 98-16105 Punchdown Block or NID DSL Jack RTU Customer Premises (CP) DSL Ethernet Crossover Cable Ethernet Cable or Central Office (CO) Demarcation Point Local Loop CP POTS Splitter DSL – Digital Subscriber Line POTS – Plain Old T elephone Service NID – Network Interface Device R TU – Remote T ermination Unit POTS End-user Systems Network ...

  • Paradyne 5620 RTU - page 4

    4 DSL Access without a POTS Splitter When the Hotwire 5620 RTU is installed without a POTS splitter , a second telephone wiring pair is needed for DSL access. 97-15345-02 Punchdown Block or NID DSL Jack RTU Customer Premises (CP) POTS DSL Ethernet Crossover Cable Ethernet Cable or Central Office (CO) Demarcation Point Local Loop Hub New Wiring Conn ...

  • Paradyne 5620 RTU - page 5

    5 Installing the DSL Access Wiring The local loop terminates at the punchdown block or NID. Wiring must be connected from the customer premises side of the punchdown block or the NID to the DSL jack. T ypically , the punchdown block is installed in commercial locations and the NID is installed in residential locations.  Procedur e 1. Access the ...

  • Paradyne 5620 RTU - page 6

    6 3. Locate the DSL pair of T1/R1 connectors on the customer premises side of the NID or punchdown block. Attach the wiring that will be connected to the DSL jack. In the following example, a NID is used without a POTS splitter . It includes an existing POTS line and a second pair installed for DSL access. DSL/PO TS Access from Local Loop Wiring to ...

  • Paradyne 5620 RTU - page 7

    97-15300a RJ11 W all Jack or 7 The Hotwire 5620 RTU connects to the local loop via wiring from the demarcation point to an RJ1 1 wall jack. The DSL twisted-pair wiring from the local loop terminates at a new or existing wall jack. It may be necessary to install a standard single RJ1 1 jack or replace a single jack with a double RJ1 1 wall jack. 97- ...

  • Paradyne 5620 RTU - page 8

    8 Installing the Hotwire 5620 R TU Place the Hotwire 5620 RTU on a flat surface with clearance for the rear connectors.  Procedur e 1. Use the supplied RJ1 1 6-pin interface cable for the DSL connection. Insert one end of the cable into the jack labeled DSL. Insert the other end into the wall jack labeled DSL. 97-15300-01 DSL Jack POWER ETHERNET ...

  • Paradyne 5620 RTU - page 9

    9 2. Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the cable into the jack labeled ETHERNET .  Use a straight-through cable and connect the other end to an Ethernet hub, or 97-15303-01 Ethernet Hub Ethernet Line PO WER ETHERNET DSL Hotwire RTU Ethernet Cable  Use an Ethernet crossover cable and connect the other e ...

  • Paradyne 5620 RTU - page 10

    496-14952 97-15303c Ethernet Line PO WER ETHERNET DSL Hotwire RTU F errite Choke 10 3. Place the large ferrite choke on the Ethernet cable as closely as possible to the RTU. Pass the Ethernet cable through the ferrite choke twice, creating a loop as shown. 4. Close the two halves around the cable and snap the ferrite choke shut. Press down on the p ...

  • Paradyne 5620 RTU - page 11

    11 Optional R TU W all Placement The Hotwire 5620 RTU is designed for tabletop placement. The R TU can also be mounted on a wall. T o mount an RTU, you will need: - Three slotted-head #6 self-threading screws with molly bolts - Drill and 3/16 I drill bit for the molly bolts - Screwdriver A template with the dimensions for the three screws is provid ...

  • Paradyne 5620 RTU - page 12

    12 R TU Hardwar e T emplate F ront (LEDs) 98-16171 5.43" 7.55" T o Bottom Hole ...

  • Paradyne 5620 RTU - page 13

    13 Power -On When power is applied, the RTU performs self-diagnostics and the PWR LED is on. The self-diagnostics includes a power-on self-test. During the power-on self-test, all of the LEDs turn on for one second. TST DSL ETHERNET ALM PWR TM 98-15835 P ower – g reen Alarm – red T est – y ellow Digital Subscriber Line – green Ethernet Link ...

  • Paradyne 5620 RTU - page 14

    14 T roubleshooting LED Symptom Action All LEDs are on. The RTU may be in download mode. W ait ten minutes. If LEDs remain on after ten minutes and the RTU is not in download mode, the RTU is not functional. Contact the NSP . ALM LED remains on. The power-on self-test may have failed. Unplug the unit and reapply power . If the alarm LED is still on ...

  • Paradyne 5620 RTU - page 15

    98-16055a 8-Pin Plug Ethernet Cable Pin #1 Pin #8 15 Cables & Connectors Use standard twisted-pair CA T3 or better cables. This section is reference information.  The Ethernet interface connector uses an 8-pin, non-keyed modular plug. — T o connect the RTU to an Ethernet hub, use the straight-through connection. 8-Pin Straight-Through Conn ...

  • Paradyne 5620 RTU - page 16

    98-15304-01 6-Pin RJ11 Plug DSL Cable Pin #1 Pin #6 16  The DSL interface connector uses a 6-pin, non-keyed modular plug. RJ1 1 6-Pin Connector Pin # Function 1 & 2 Not used 3 DSL Ring 4 DSL T ip 5 & 6 Not used Model 5620 R TU T echnical Specifications Item Specification * Height x Width x Depth 1.43 ″ x 6.00 ″ x 8.75 ″ (3.64 cm x ...

  • Paradyne 5620 RTU - page 17

    17 Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered. 3. Do n ...

  • Paradyne 5620 RTU - page 18

    18 Declaration of Conformity This Declaration of Conformity is made by Paradyne Corporation pursuant to Parts 2 and 15 of the Federal Communications Commission’s Rules. This compliance information statement pertains to the following products: T rade Name: Hotwire Model Number: 5620-A2-200 This device complies with Part 15 of the FCC Rules. Operat ...

  • Paradyne 5620 RTU - page 19

    19 Canada EMI W arnings ! W ARNING: T o Users of Digital Apparatus in Canada: This Class B digital apparatus meets all requirements of the Canadian interference-causing equipment regulations. Cet appareil numérique de la classe B respecte toutes les exigences du règlement sur le matérial brouilleur du Canada. Notice to Users of the Canadian T el ...

  • Paradyne 5620 RTU - page 20

    20 W arranty , Sales, and Service Information Contact your local sales representative, service representative, or distributor directly for any help needed. For additional information concerning warranty , sales, service, repair , installation, documentation, training, distributor locations, or Paradyne worldwide office locations, use one of the fol ...

Manufacturer Paradyne Category Network Router

Documents that we receive from a manufacturer of a Paradyne 5620 RTU can be divided into several groups. They are, among others:
- Paradyne technical drawings
- 5620 RTU manuals
- Paradyne product data sheets
- information booklets
- or energy labels Paradyne 5620 RTU
All of them are important, but the most important information from the point of view of use of the device are in the user manual Paradyne 5620 RTU.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Paradyne 5620 RTU, service manual, brief instructions and user manuals Paradyne 5620 RTU. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Paradyne 5620 RTU.

Similar manuals

A complete manual for the device Paradyne 5620 RTU, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Paradyne 5620 RTU by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Paradyne 5620 RTU.

A complete Paradyne manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Paradyne 5620 RTU - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Paradyne 5620 RTU, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Paradyne 5620 RTU, that we can find in the current document
3. Tips how to use the basic functions of the device Paradyne 5620 RTU - which should help us in our first steps of using Paradyne 5620 RTU
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Paradyne 5620 RTU
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Paradyne 5620 RTU in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Paradyne 5620 RTU?

Use the form below

If you did not solve your problem by using a manual Paradyne 5620 RTU, ask a question using the form below. If a user had a similar problem with Paradyne 5620 RTU it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)