English dropdown-ico

Manual Abit IP95

40 pages 2.22 mb
Download

Go to site of 40

Summary
  • Abit IP95 - page 1

    Hardware Setup BIOS Setup Driver & Utility Multilingual QIG Appendix IP-95 Motherboard Socket 775 Intel Core 2 Duo Intel Pentium D Intel Pentium 4 Intel Celeron D Intel Celeron  VIA P4M890 / VT8237R Plus  FSB1066  DDR2 533 or DDR 400  PCI Express  2x SATA 1.5Gb/s  5.1 Channel AC97 Audio ...

  • Abit IP95 - page 2

    IP-95 User’s Manual English + Multilingual QIG 1 st Edition, October 2006 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representat ...

  • Abit IP95 - page 3

    Hardware Setup Contents 1. Hardware Setup ............................................................... 1-1 1.1 Specifications .............................................................................. 1-1 1.2 Motherboard Layout ..................................................................... 1-2 1.3 Choosing a Computer Chassis ......... ...

  • Abit IP95 - page 4

    iv IP-95 iv IP-95 ...

  • Abit IP95 - page 5

    Hardware Setup 1. Hardware Setup 1.1 Specifications CPU • LGA775 socket for Intel Core 2 Duo / Pentium D / Pentium 4 / Celeron D / Celeron processor with 1066MHz FSB • Supports Intel Hyper-Threading Technology Chipset • VIA P4M890 / VT8237R Plus Memory • Supports DDR2 533 or DDR 400 Un-buffered Non-ECC memory • 2x 184-pin DIMM slots (2.5V ...

  • Abit IP95 - page 6

    1.2 Motherboard Layout 1-2 IP-95 ...

  • Abit IP95 - page 7

    Hardware Setup 1.3 Choosing a Computer Chassis • Choose a chassis big enough to install this motherboard. • As some features for this motherboard are implemented by cabling connectors on the motherboard to indicators and switches or buttons on the chassis, make sure your chassis supports all the features required. • If there is possibility of ...

  • Abit IP95 - page 8

    1.5 Checking Jumper Settings • For a 2-pin jumper, plug the jumper cap on both pins will make it CLOSE (SHORT). Remove the jumper cap, or plug it on either pin (reserved for future use) will leave it at OPEN position. SHORT OPEN OPEN • For 3-pin jumper, pin 1~2 or pin 2~3 can be shorted by plugging the jumper cap in. Pin 1~2 SHORT Pin 2~3 SHORT ...

  • Abit IP95 - page 9

    Hardware Setup CMOS Backup Battery: An onboard battery saves the CMOS memory to keep the BIOS information stays on even after disconnected your system with power source. Nevertheless, this backup battery exhausts after some five years. Once the error message like “ CMOS BATTERY HAS FAILED ” or “ CMOS checksum error ” displays on monitor, th ...

  • Abit IP95 - page 10

    1.6 Connecting Chassis Components 1.6.1 ATX Power Connectors These connectors provide the connection from an ATX power supply. As the plugs from the power supply fit in only one orientation, find the correct one and push firmly down into these connectors. ATX 24-Pin Power Connector: The power supply with 20-pin or 24-pin cables can both be connecte ...

  • Abit IP95 - page 11

    Hardware Setup 1.6.2 Front Panel Switches & Indicators Headers This header is used for connecting switches and LED indicators on the chassis front panel. Watch the power LED pin position and orientation. The mark “+” align to the pin in the figure below stands for positive polarity for the LED connection. Please pay attention when connectin ...

  • Abit IP95 - page 12

    1.6.3 FAN Power Connectors These connectors each provide power to the cooling fans installed in your system. • CPU_FAN: CPU Fan Power Connector • SYS_FAN: System Fan Power Connector • PWR_FAN: Auxiliary Fan Power Connector ※ These fan connectors are not jumpers. DO NOT place jumper caps on these connectors. 1-8 IP-95 ...

  • Abit IP95 - page 13

    Hardware Setup 1.6.4 Chassis Speaker Connector This header provides the connection to chassis speaker. IP-95 1-9 ...

  • Abit IP95 - page 14

    1.7 Installing Hardware ※ DO NOT scratch the motherboard when installing hardware. An accidentally scratch of a tiny surface-mount component may seriously damage the motherboard. ※ In order to protect the contact pins, please pay attention to these notices: 1. A maximum 20 cycles of CPU installation is recommended. 2. Never touch the contact pi ...

  • Abit IP95 - page 15

    Hardware Setup 5. Use your left hand to hold the load plate, and use your right thumb to peel the cap off. The cap plays an important role in protecting contact pins. In order to prevent bent pin, PUT ON the cap after operation or testing. 6. Lower the plate onto the CPU package. Engage the load lever while gently pressing down the load plate. 7. S ...

  • Abit IP95 - page 16

    1.7.2 DDR2/DDR Memory Slots This motherboard supports two DDR or two DDR2 DIMMs. Note that DDR & DDR2 cannot be both applied at the same time. Apply either DDR or DDR2 memory modules only! ※ Usually there is no hardware or BIOS setup required after adding or removing memory modules, but you will have to clear the CMOS memory first if any memo ...

  • Abit IP95 - page 17

    Hardware Setup 1.8 Connecting Peripheral Devices 1.8.1 Floppy and IDE Disk Drive Connectors The FDC1 connector connects up to two floppy drives with a 34-wire, 2-connector floppy cable. Connect the single end at the longer length of ribbon cable to the FDC1 on the board, the two connectors on the other end to the floppy disk drives connector. Gener ...

  • Abit IP95 - page 18

    1.8.2 Serial ATA Connectors Each SATA connector serves as one single channel to connect one SATA device by SATA cable. To connect SATA device: 1. Attach either end of the signal cable to the SATA connector on motherboard. Attach the other end to SATA device. 2. Attach the SATA power cable to the SATA device and connect the other end from the power ...

  • Abit IP95 - page 19

    Hardware Setup 1.8.3 Additional USB 2.0 Port Headers Each header supports 2x additional USB 2.0 ports by connecting bracket or cable to the rear I/O panel or the front-mounted USB ports of your chassis. Pin Pin Assignment Pin Pin Assignment 1 VCC 2 VCC 3 Data0 - 4 Data1 - 5 Data0 + 6 Data1 + 7 Ground 8 Ground 10 NC ※ Make sure the connecting cabl ...

  • Abit IP95 - page 20

    1.8.5 Front Panel Audio Connection Header This header provides the connection to audio connector at front panel. • To use the audio connector at front panel, remove all the jumpers on this header, and then connect to front panel by the extension cable provided with the chassis. • To use the audio connector at rear panel, disconnect the extensio ...

  • Abit IP95 - page 21

    Hardware Setup 1.8.6 PCI and PCI Express X16, X1 Slots Install PCI Express X16 graphics card into slot “PCIEX16”. Install PCI Express X1 card into slot “PCIEX1”. Install PCI cards into slots “PCI1” and/or “PCI2”. IP-95 1-17 ...

  • Abit IP95 - page 22

    1.9 Connecting Rear Panel I/O Devices The rear I/O part of this motherboard provides the following I/O ports: • Mouse: Connects to PS/2 mouse. • Keyboard: Connects to PS/2 keyboard. • LPT1: Connects to printer or other devices that support this communication protocol. • COM1: Connects to external modem, mouse or other devices that support t ...

  • Abit IP95 - page 23

    BIOS Setup IP-95 2-1 2. BIOS Setup This motherboard provides a programmable EEPROM so that you can update the BIOS utility. The BIOS (Basic Input/Output System) is a program that deals with the basic level of communication between processor and peripherals. Use the BIOS Setup program only when installing motherboard, reconfiguring system, or prompt ...

  • Abit IP95 - page 24

    2-2 IP-95 ...

  • Abit IP95 - page 25

    Driver & Utility IP-95 3-1 3. Driver & Utility The “Driver & Utility CD” that came packed with this motherboard contains drivers, utilities and software applications required for its basic and advanced features. Place the “Driver & Utility CD” into the CD-ROM drive in your system. The following installation auto-run screen a ...

  • Abit IP95 - page 26

    3-2 IP-95 3-2 IP-95 ...

  • Abit IP95 - page 27

    Multilingual QIG IP-95 4-3 4. Multilingual Quick Installation Guide 4.1 繁體中文 4.1.1 規格 處理器 • 支援具備 1066MHz 前端匯流排的 Intel Core 2 Duo / Pentium D / Pentium 4 / Celeron D / Celeron 處理器 • 支援 Intel Hyper-Threading 技術 晶片組 • VIA P4M890 / VT8237R Plus 記憶體 • 支援 DDR2 533 或 DDR 400 無 ...

  • Abit IP95 - page 28

    4.1.2 快速安裝指南 本 「快速安裝指南」 僅包含安裝 abit 主機板時 所需的基本硬體資訊。詳細的操作方式，請參 閱完整的手冊版本。 硬體安裝注意事項 • 安裝機板或變換任何設定之前，請先關閉電源並拔 掉電源插頭。 • 從抗靜電袋中取出機板前，請先戴上靜電 ...

  • Abit IP95 - page 29

    Multilingual QIG IP-95 4-5 附加的 USB 連接埠接頭： [FP-USB1] 、 [FP-USB2] 除了位於 I/O 面板上的內建 USB 接頭外，您可透過帶 有支架的延長線，連接這些各有兩個附加 USB 連接埠 的接頭。 針腳 針腳定義 針腳 接腳定義 1 VCC 2 VCC 3 負資料通道 0 4 負資料通道 1 5 正資料通道 0 6 ? ...

  • Abit IP95 - page 30

    4-6 IP-95 4-6 IP-95 ...

  • Abit IP95 - page 31

    Multilingual QIG IP-95 4-7 4.2 简体中文 4.2.1 规格 处理器 • 支持具备 1066MHz 前端总线的 Intel Core 2 Duo / Pentium D / Pentium 4 / Celeron D / Celeron 处理器 • 支持 Intel 超线程技术 芯片组 • VIA P4M890 / VT8237R Plus 内存 • 支持 DDR2 533 或 DDR 400 无缓冲非 ECC 内存 • 2 条 184 针脚 DIMM 插槽? ...

  • Abit IP95 - page 32

    4.2.2 快速安装指南 本“快速安装指南”仅包含基本的硬件信息， 供您在安装 abit 主板时进行参考 。 如需了解高 级操作，请参阅其详细指南。 硬件设置注意事项 • 在安装主板或更改任何设置前，务必关闭电源并从 交流插座上拔掉电源线。 • 从防静电袋中取出主 ...

  • Abit IP95 - page 33

    Multilingual QIG IP-95 4-9 附加的 USB 端口接头： [FP-USB1] 、 [FP-USB2] 除了位于 I/O 面板上的板载 USB 连接器外，这些接头 可以通过带线卡的延长电缆分别提供两个附加的 USB 端口连接。 针脚 针脚定义 针脚 针脚定义 1 VCC 2 VCC 3 负数据通道 0 4 负数据通道 1 5 正数据通道 0 6 正 ...

  • Abit IP95 - page 34

    4-10 IP-95 4-10 IP-95 ...

  • Abit IP95 - page 35

    Appendix IP-95 5-1 5. Appendix 5.1 Troubleshooting (How to Get Technical Support?) 5.1.1 Q & A Q: Do I need to clear the CMOS before I use a new motherboard to assemble my new computer system? A: Yes, we highly recommend that you clear the CMOS before installing a new motherboard. Please move the CMOS jumper from its default 1-2 position to 2-3 ...

  • Abit IP95 - page 36

    Q: How to get a quick response for my request on technical support? A: Please carry out a simple troubleshooting before sending “ Technical Support Form ”: System boot-up fails after the system had been assembled: Check the motherboard’s supporting specifications first to see if all the key components attached in your system can meet. To do s ...

  • Abit IP95 - page 37

    Appendix IP-95 5-3 • Memory configuration: Type in the memory configuration in BIOS setting. Example: Memory Timing: 2.5-3-3-7 @533MHz • Graphics information: Note Graphics card’s brand, model and driver version • Graphics card: Type in the brand and model name of your graphics card. Example: ATI RADEON X850 XT PE • Graphics driver versio ...

  • Abit IP95 - page 38

    5.1.2 Technical Support Form Region: E-mail: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Graphics driver version: Power supply maker: Power supply wattage: Storage devices: Optical devices: Other devices: Operating system: Problem description: 5-4 IP-95 ...

  • Abit IP95 - page 39

    Appendix IP-95 5-5 5.1.3 Contact Information Taiwan Head Office Universal ABIT Co., Ltd. No. 323, Yang Guang St., Neihu, Taipei, 114, Taiwan Tel: 886-2-8751-3380 Fax: 886-2-8751-3381 Sales: sales@abit.com.tw Marketing: market@abit.com.tw North America, South America Universal ABIT (USA) Corporation 2901 Bayview Drive, Fremont, CA 94538, U.S.A. Tel: ...

  • Abit IP95 - page 40

    P/N: 4310-0000-51 Rev. 1.00 http://www.abit.com.tw ...

Manufacturer Abit Category Motherboard

Documents that we receive from a manufacturer of a Abit IP95 can be divided into several groups. They are, among others:
- Abit technical drawings
- IP95 manuals
- Abit product data sheets
- information booklets
- or energy labels Abit IP95
All of them are important, but the most important information from the point of view of use of the device are in the user manual Abit IP95.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Abit IP95, service manual, brief instructions and user manuals Abit IP95. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Abit IP95.

Similar manuals

A complete manual for the device Abit IP95, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Abit IP95 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Abit IP95.

A complete Abit manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Abit IP95 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Abit IP95, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Abit IP95, that we can find in the current document
3. Tips how to use the basic functions of the device Abit IP95 - which should help us in our first steps of using Abit IP95
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Abit IP95
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Abit IP95 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Abit IP95?

Use the form below

If you did not solve your problem by using a manual Abit IP95, ask a question using the form below. If a user had a similar problem with Abit IP95 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)