Manual Watlow Electric Gateway & DeviceNet

21 pages 0.31 mb
Download

Go to site of 21

Summary
  • Watlow Electric Gateway & DeviceNet - page 1

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 1 4/08 Configuring the RUI/Gateway on DeviceNet TM Using RSNetWorx 1. Prior to making the physical connections on the network setup the gatewa ...

  • Watlow Electric Gateway & DeviceNet - page 2

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 2 4/08 display as shown below. In this particu lar case, node 7 (RUI/Gateway) appears with a question mark because it has not yet been registe ...

  • Watlow Electric Gateway & DeviceNet - page 3

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 3 4/08 6. Select Register an EDS file. 7. Register a single file and then click browse to locate its location. ...

  • Watlow Electric Gateway & DeviceNet - page 4

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 4 4/08 8. When found notice that if there is an icon with the same name the software will register it along with the EDS file. Click next to p ...

  • Watlow Electric Gateway & DeviceNet - page 5

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 5 4/08 10. After clicking next above, the software will associ ate an icon to this device, if there was none found in the previous step it wil ...

  • Watlow Electric Gateway & DeviceNet - page 6

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 6 4/08 12. The next series of steps involves mappi ng the available RUI/Gatewa y input (84) and output (80) bytes via the scanner into the PLC ...

  • Watlow Electric Gateway & DeviceNet - page 7

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 7 4/08 14. After the scanner recognizes the RUI/Gate way on the network it will then appear as an Available Device as shown below. Before clic ...

  • Watlow Electric Gateway & DeviceNet - page 8

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 8 4/08 15. Once the available device (RUI/Gateway in th is case) is moved over to the Scanlist the next step will be to map the RUI/Gate way i ...

  • Watlow Electric Gateway & DeviceNet - page 9

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 9 4/08 The PLC will need to be in the program or remote program m ode for this to occur. When written this completes the configuration of the ...

  • Watlow Electric Gateway & DeviceNet - page 10

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 10 4/08 18. The table below does not r epresent all of the RUI/Gateway prompts that need configuration but they do represent those that are pe ...

  • Watlow Electric Gateway & DeviceNet - page 11

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 11 4/08 19. The gateway instance represents the EZ-ZONE ® control, in this case, PM 1-4. The enable gateway instance simply turns on that par ...

  • Watlow Electric Gateway & DeviceNet - page 12

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 12 4/08 22. Notice too, the slot number, in this case “1 ”. This is the physical slot in which the scanner resides. After the scanner is c ...

  • Watlow Electric Gateway & DeviceNet - page 13

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 13 4/08 Reading and Writing to/from RUI/Gateway Using RSLogix 5000 24. The rung of logic below when enabled, will execute an explicit message ...

  • Watlow Electric Gateway & DeviceNet - page 14

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 14 4/08 25. Notice above that there are screen shots for the confi guration and communication tabs. Within the configuration, the programmer w ...

  • Watlow Electric Gateway & DeviceNet - page 15

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 15 4/08 Default Target to Originator (T to O) Assembly Default Originator to Target (O to T) Assembly ...

  • Watlow Electric Gateway & DeviceNet - page 16

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 16 4/08 29. Each of the members shown abo ve are passed implic itly to and from the gateway to the PLC with little to no programming. Note: If ...

  • Watlow Electric Gateway & DeviceNet - page 17

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 17 4/08 31. Once the user defined dat a types have been created for the T to O and O to T assemblies right click on the controller tags folder ...

  • Watlow Electric Gateway & DeviceNet - page 18

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 18 4/08 transfer of data to and from the PLC and EZ-ZONE ® controllers via simple copy instructions in the PLC. The copy instruction also wor ...

  • Watlow Electric Gateway & DeviceNet - page 19

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 19 4/08 Device Physical Address Logical Address (Set by User) Personal Computers 0-3 1-4 RUI 4-11 1-8 Communication Cards 12-15 1-4 ( indirect ...

  • Watlow Electric Gateway & DeviceNet - page 20

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 20 4/08 37. In step 30 it was suggested that the user may want to create user defined data types. Likewise, in step 31 it was also suggested t ...

  • Watlow Electric Gateway & DeviceNet - page 21

    RUI/Gateway & DeviceNet TM Configuration & Ladder Logic Example Using an Allen-Brad ley CompactLogix PLC Watlow 1241 Bundy Blvd Winona, MN 55987 Telephone: 507-494-5656 © 2007 Watlow Electric Mfg Co 21 4/08 Custom T to O Assembly Custom O to T Assembly ...

Manufacturer Watlow Electric Category Network Card

Documents that we receive from a manufacturer of a Watlow Electric Gateway & DeviceNet can be divided into several groups. They are, among others:
- Watlow Electric technical drawings
- Gateway & DeviceNet manuals
- Watlow Electric product data sheets
- information booklets
- or energy labels Watlow Electric Gateway & DeviceNet
All of them are important, but the most important information from the point of view of use of the device are in the user manual Watlow Electric Gateway & DeviceNet.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Watlow Electric Gateway & DeviceNet, service manual, brief instructions and user manuals Watlow Electric Gateway & DeviceNet. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Watlow Electric Gateway & DeviceNet.

A complete manual for the device Watlow Electric Gateway & DeviceNet, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Watlow Electric Gateway & DeviceNet by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Watlow Electric Gateway & DeviceNet.

A complete Watlow Electric manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Watlow Electric Gateway & DeviceNet - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Watlow Electric Gateway & DeviceNet, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Watlow Electric Gateway & DeviceNet, that we can find in the current document
3. Tips how to use the basic functions of the device Watlow Electric Gateway & DeviceNet - which should help us in our first steps of using Watlow Electric Gateway & DeviceNet
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Watlow Electric Gateway & DeviceNet
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Watlow Electric Gateway & DeviceNet in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Watlow Electric Gateway & DeviceNet?

Use the form below

If you did not solve your problem by using a manual Watlow Electric Gateway & DeviceNet, ask a question using the form below. If a user had a similar problem with Watlow Electric Gateway & DeviceNet it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)