Manual 3M 2529

8 pages Not applicable
Download

Go to site of 8

Summary
  • 3M 2529 - page 1

    1.0 General 1.1 The 3M ™ Fibrlok ™ II Univ ersal Optical Fiber Splice 2529 provides permanent mechanical splices for singlemode or multimode fiber ha ving 125 µm diameter cladding. The 2529 uni versal splice is designed to accommodate any combination of f ibers with coating diameters from 250 µm to 900 µm. 1.2 All 2529 splices are gray in co ...

  • 3M 2529 - page 2

    2 78-8128-0163-3-G 1.4 T ools and Materials Required ar e as follo ws: • 3M ™ Fibrlok ™ Assembly T ool 2501 • Plastic coating (buf fer) stripper • Reagent-grade isopropyl alcohol • Lint-free wipes • Cleav er • 3M Fibrlok II video instructions (optional) • 3M Fibrlok T ool Kit (optional) 1.5 Some compatible 3M Fiber Splice T ray pr ...

  • 3M 2529 - page 3

    3 78-8128-0163-3-G 2.4 Remo ve 3M ™ Fibrlok ™ II Univ ersal Splice 2529 from its protectiv e package. Load the splice into the assembly tool by pressing firmly at the ends of the splice. Note: Carefully follo w health, safety and en vironmental information on F ibrlok II splice label or Safety Data Sheet.  CAUTION May cause minimal eye irrit ...

  • 3M 2529 - page 4

    4 78-8128-0163-3-G 250 µ m 900 µ m 250 µ m : 12.5 mm 900 µ m : 12.5 mm 900 µ m : 14.0 mm 4.0 Splice Assembly 4.1 Push the f iber down into the f iber retention pad on the proper side of the splice. Note: Hold the coated portion of the fiber ONL Y . Do not allow the cleav ed end to contact any surface before insertion into the splice. 4.2 Grasp ...

  • 3M 2529 - page 5

    5 78-8128-0163-3-G 4.7 F ollowing proper insertion, the second f iber will be approximately straight, but may ha ve up to a .1 inch (3 mm) maximum bow . At this point, the first f iber will hav e a larger bo w than the second fiber and lar ger than it had initially . 4.8 Push the f irst fiber back against the second f iber until there are equal bow ...

  • 3M 2529 - page 6

    6 78-8128-0163-3-G 5.3 If using the 3M ™ Fibrlok Assembly T ool 2501, be sure that the retention pad toggle arms are in the inward position for 250 µm f ibers and in the outward position for splicing 900 µm f ibers. 5.4 Strip and clea ve f irst fiber to 12.5 mm ± 0.5 mm (0.492 ± 0.20 in). 5.5 T aking care not to touch fiber end face, place f ...

  • 3M 2529 - page 7

    7 78-8128-0163-3-G 7.0 Fiber Organization and Splice Storage 7.1 When storing f iber slack in a splice tray , the spliced fiber ends will twist one full turn for each full loop of fiber being stored. This rotation places stress on the fibers. This rotational stress makes fiber or ganization more dif ficult and may af fect fiber/splice performance, ...

  • 3M 2529 - page 8

    8.0 Splicing Accessories 8.1 The 3M ™ Fiber Splice Organizer T ray 2523 holds up to 24 Fibrlok splices and provides e xcellent fiber and splice or ganization. Easily installed, the tray will accommodate up to eight buf fer tubes holding up to 48 fibers (250 µm or 900 µm coated fibers) and can be adapted for fusion splice storage. 8.2 The 2524 s ...

Manufacturer 3M Category Tongs

Documents that we receive from a manufacturer of a 3M 2529 can be divided into several groups. They are, among others:
- 3M technical drawings
- 2529 manuals
- 3M product data sheets
- information booklets
- or energy labels 3M 2529
All of them are important, but the most important information from the point of view of use of the device are in the user manual 3M 2529.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals 3M 2529, service manual, brief instructions and user manuals 3M 2529. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product 3M 2529.

Similar manuals

A complete manual for the device 3M 2529, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use 3M 2529 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of 3M 2529.

A complete 3M manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual 3M 2529 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the 3M 2529, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the 3M 2529, that we can find in the current document
3. Tips how to use the basic functions of the device 3M 2529 - which should help us in our first steps of using 3M 2529
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with 3M 2529
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of 3M 2529 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning 3M 2529?

Use the form below

If you did not solve your problem by using a manual 3M 2529, ask a question using the form below. If a user had a similar problem with 3M 2529 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)