English dropdown-ico

Manual AirLink APSUSB203

14 pages Not applicable
Download

Go to site of 14

Summary
  • AirLink APSUSB203 - page 1

    Quick Installation Guide Model # APSUSB203 Ve r . 1 A 3-Port Print Server ...

  • AirLink APSUSB203 - page 2

    Connecting the Print Server Section 1 W arning: Only a USB printer may be connected to the USB port of the Print Server . Connecting any other USB device to the Print Server may damage the Print Server . Note: Do not plug the power cord to the Print Server until you have reached Step 4 of this section. Step 1 Connect one end of the network cable to ...

  • AirLink APSUSB203 - page 3

    Section 2 Installing PS Utility Step 1 Insert the provided CD and wait for the autorun screen to appear . Step 2 Click on Inst all PS Utility . Step 3 Click Next . Note: If the autorun screen does not appear automatically , go to S t art , Run , type D:autorun.exe (where D is the letter of your CD drive) and click OK . ...

  • AirLink APSUSB203 - page 4

    Step 4 Click Next . Step 5 Click Ye s . Step 6 Click Finish . ...

  • AirLink APSUSB203 - page 5

    Section 3 Configuring Network Setting Before configuring the Print Server ’ s network setting, please t ake note of your computer ’ s TCP/IP setting. Step 1 Click on Start , Run , and type command (for Windows 95/98/ME) or cmd (for Windows 2000/ XP) and click OK . Step 2 At the command prompt, type ipconfig and press Enter . Step 3 Write down t ...

  • AirLink APSUSB203 - page 6

    S tep 6 In the IP Address field, enter a valid IP address, subnet mask, and default gateway that matches your local area network. For example : If your computer ’s IP Address is 192.168.1 .100 , enter the same three numbers: 192.168.1 in the corresponding fields. Note: Y ou can leave the last IP Address number 254 as is unless another network dev ...

  • AirLink APSUSB203 - page 7

    V erifying Network Connection Section 4 Step 1 Run the PS Utility by going to St art , (All) Programs , PS-Utility , PS-Utility v3.00 . Step 2 Make sure the Print Server is detected under the Device Name . Step 3 Click on Show W eb Setup to display the Print Server ’s Web Configuration Utility . Step 4 V erify that the Printer S t atus for the co ...

  • AirLink APSUSB203 - page 8

    Step 5 Click on the T ools link, select the port you want to test and click the T est button. The Print Server will perform a low-level print test, bypassing the operating system layer . Note: Y our printer should print out a test p age. If not, verify that the printer is powered on and all cables are securely connected and try again. If the printe ...

  • AirLink APSUSB203 - page 9

    Section 5 Running PS Wizard W arning: Make sure you have installed the printer driver locally on every computer that will use the Print Server in your network before running the PS Wizard. Otherwise, the PS Wizard will not run properly . Be sure to run the PS Wizard on all the computers that will use the Print Server in your network. Step 1 Insert ...

  • AirLink APSUSB203 - page 10

    Section 4 Step 3 Click Next . Step 4 Select the printer that is connected to the print server and click Next . ...

  • AirLink APSUSB203 - page 11

    Step 5 Double-click on the Print Server , select the Printer Port that the printer is connected to and click Next . Step 6 Click Finish and OK . (For Windows 95/98/ME, you’ll need to reboot the computer). S tep 7 Re-run the PS Wizard and setup any remaining printer(s) that are connected to the print server . Step 8 Run the PS Wizard on all the co ...

  • AirLink APSUSB203 - page 12

    Section 6 Performing Operating System Print T est The final step in setting up the Print Server is to perform an operating system print test. Please note that the instructions below are for Windows XP , but the steps are similar for all the other Windows operating systems. Step 1 Click on Start , Settings , Printers and Faxes . Step 2 Right-click o ...

  • AirLink APSUSB203 - page 13

    Section 7 T echnical Support E-mail: support@airlink101.com T oll Free: 1-888-746-3238 Web Site: www .airlink101.com Y ou have successfully configured the Print Server for printing. For more information on how to use the Web Configuration Utility or setup for Mac OS, please refer to the User ’ s Manual in the provided CD. Step 3 Click on the Prin ...

  • AirLink APSUSB203 - page 14

    Copyright © 2006 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of A irLink101. All other product or service names are the property of their re ...

Manufacturer AirLink Category Print Server

Documents that we receive from a manufacturer of a AirLink APSUSB203 can be divided into several groups. They are, among others:
- AirLink technical drawings
- APSUSB203 manuals
- AirLink product data sheets
- information booklets
- or energy labels AirLink APSUSB203
All of them are important, but the most important information from the point of view of use of the device are in the user manual AirLink APSUSB203.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AirLink APSUSB203, service manual, brief instructions and user manuals AirLink APSUSB203. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AirLink APSUSB203.

Similar manuals

A complete manual for the device AirLink APSUSB203, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AirLink APSUSB203 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AirLink APSUSB203.

A complete AirLink manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AirLink APSUSB203 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AirLink APSUSB203, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AirLink APSUSB203, that we can find in the current document
3. Tips how to use the basic functions of the device AirLink APSUSB203 - which should help us in our first steps of using AirLink APSUSB203
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AirLink APSUSB203
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AirLink APSUSB203 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AirLink APSUSB203?

Use the form below

If you did not solve your problem by using a manual AirLink APSUSB203, ask a question using the form below. If a user had a similar problem with AirLink APSUSB203 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)