English dropdown-ico

Manual Wayne-Dalton 9300

28 pages 5.29 mb
Download

Go to site of 28

Summary
  • Wayne-Dalton 9300 - page 1

    T or queMaster ® Plus Installation Instructions and Owner’ s Manual Copyright 2008 Wayne-Dalton Corp. Part No. 327882 Rev 2 3-28-2008 9300 Series IMPORT ANT NOTICE! Read these instructions carefully befor e attempting installation. If in question about any of the procedur es, do not perform the work. Instead, have a trained door systems technici ...

  • Wayne-Dalton 9300 - page 2

    2 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com Definition of key words used in this manual: INDICA TES A POTENTIALL Y HAZARDOUS SITUA TION WHI ...

  • Wayne-Dalton 9300 - page 3

    3 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com P ackage Contents NOTE : DEPENDING ON THE DOOR MODEL, SOME P ARTS LISTED WILL NOT BE SUPPLIED IF ...

  • Wayne-Dalton 9300 - page 4

    All hinges are factory attached a t the top of each section (except the top section). See illustra tions to the right. NOTE : The side view illustration shows the roller carrier profile at the top of each section, and can be used in conjunction with identifying each section. The BOTTOM SECTION can be identified by the bottom astragal and bottom b ...

  • Wayne-Dalton 9300 - page 5

    5 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com IMPORT ANT : COUNTERBALANCE SPRING TENSION MUST AL WA YS BE RELEASED BEFORE ANY A TTEMPT IS MADE ...

  • Wayne-Dalton 9300 - page 6

    T ools Needed: 6 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com Preparing the Opening Recommended tools from page 5 HEADROOM REQUIREMENT TRACK TY ...

  • Wayne-Dalton 9300 - page 7

    7 T ools Needed: Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com Begin the installation of the door by checking the opening. It must be the same s ...

  • Wayne-Dalton 9300 - page 8

    T ools Needed: 8 T ools Needed: Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com Horizontal Angle Hammer Attaching Fully Adjustable Flagangle to Ve ...

  • Wayne-Dalton 9300 - page 9

    T ools Needed: 9 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com INST ALLA TION T ape Measure 4 Installing Q.I. Jamb Brackets TWISTLOCK T AB LEFT ...

  • Wayne-Dalton 9300 - page 10

    T ools Needed: 10 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com Drums IMPORT ANT : RIGHT AND LEFT HAND IS AL WA YS DETERMINED FROM INSIDE THE BU ...

  • Wayne-Dalton 9300 - page 11

    11 T ools Needed: T ools Needed: Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com Bottom Section Center the bottom section in the door opening. Lev ...

  • Wayne-Dalton 9300 - page 12

    T ools Needed: 12 T ools Needed: Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com Stacking Sections NOTE : For door section identification see pag ...

  • Wayne-Dalton 9300 - page 13

    T ools Needed: 13 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com T op Section Place the top section in the opening and vertically align with lowe ...

  • Wayne-Dalton 9300 - page 14

    NOTE : If you have fully adjustable flagangle, skip this step and complete Step 12. T o install horizontal track, place the cur ved end over the top roller . Align key slot of the horizontal track with the quick install tab of the flagangle. Push curved portion of horizontal track down to lock in place. Level the horizontal track assembly and bol ...

  • Wayne-Dalton 9300 - page 15

    15 T ools Needed: T ools Needed: Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com 14 Adjusting T op Bracket Slide With horizontal tracks installed, ...

  • Wayne-Dalton 9300 - page 16

    T ools Needed: None 15 Center Bracket Assembly NOTE : If you are installing the i drive ® opener with your garage door , skip this step and go to your i drive ® Installation Instructions and Owner’ s Manual. After completing steps 1-13 of your idrive Installation Instructions and Owner’ s Manual, rear supports NOTE: If you are not installing ...

  • Wayne-Dalton 9300 - page 17

    Ratchet Paw l ENGAGED SIDE VIEW No space betw een Ratchet Pawl and Cable Drum ENGAGED U ND E RN E ATH VI EW DISENGAGED SIDE VIEW DISENGAGED U NDE R NE A T Use these Il lustrat ion, in conjunction wit h the Instructi o this label . W ARNIN G Rachet B racket is unde EXTREME SPRING TENSION . To avoid possible severe fatal injury , DO NOT rem o fasten ...

  • Wayne-Dalton 9300 - page 18

    T ools Needed: T ools Needed: (2) Vice Clamps CENTER BRACKET BUSHING ASSEMBL Y (2) 5/16” X 1-5/8” HEX HEAD LAG SCREWS Securing Center Bracket Assembly 19 NOTE : If you are not installing the idrive ® opener on your garage door , you must install the center bracket bushing assembly , follow these instructions. IMPORT ANT : TORQUEMASTER ® SPRIN ...

  • Wayne-Dalton 9300 - page 19

    Cable Adjustment Vice Grips Pliers/Wire Cutters Flat Tip Screwdriver Step Ladder ENGAGE D No space between Ratchet Pawl and Cable Drum ENGAGED UNDERNEATH VIEW DISENGAG DISENGAGED U NDERNEATH VIEW Use these Illustration, in conjunction this label. W A Rachet Br a EXTRE M TEN T o avoid pos s fatal injury, D O fasteners fro m until sprin g wn w To saf ...

  • Wayne-Dalton 9300 - page 20

    T ools Needed: 22 Winding Springs Continued... extension is also recommended for added clearance from the horizontal angle.), wind the spring by rota ting the winding shaft counter clockwise, while watching either the black tooth on the ratchet wheel or the mark on the winding shaft. IMPORT ANT : P AWL KNOB MUST BE IN UPPER POSITION TO ADD/ REMOVE ...

  • Wayne-Dalton 9300 - page 21

    T ools Needed: 21 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com Rear Support Raise the door until the top section and half of the next section a ...

  • Wayne-Dalton 9300 - page 22

    T ools Needed: 22 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com onto the winding shaft, pull do wn to add 3/10 of a turn. Watch as three teeth o ...

  • Wayne-Dalton 9300 - page 23

    T ools Needed: 23 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com IMPORT ANT! THE OPENER FORCE SET - TINGS MUST BE ADJUSTED ACCORDING TO THE MANUF ...

  • Wayne-Dalton 9300 - page 24

    T ools Needed: 24 Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com Cable Drum No space between Ratchet Pawl and Cable Drum indicates engagement Cab ...

  • Wayne-Dalton 9300 - page 25

    T ools Needed: EN GAGED SIDE VIEW hese Illustrati on , in co nj uncti on with th e Instruct io ns on t he other side of WAR NING R ach et B rac ke t is under X TR E M E S P R I NG N S IO N . sev ere o r ov e T o add spring tension, ensure the ra tchet wrench is set so that it will tighten counter clockwise on the right hand side, and clockwise on t ...

  • Wayne-Dalton 9300 - page 26

    T ools Needed: Power Drill 1/8” Drill Bit T ape Measure  Pull Rope DO NOT INST ALL PULL ROPES ON DOORS WITH ELECTRIC OPERA TORS. CHILDREN MA Y BECOME ENT ANGLED IN THE ROPE CAUSING SEVERE OR F A T AL INJURY . Measure and mark the jamb approximately 48” to 50” (1220 to 1270 mm) from floor on the right or left side of jamb. Drill 1/8” pilo ...

  • Wayne-Dalton 9300 - page 27

    Please Do Not Return This Product T o The Store. Contact your local Wayne-Dalton dealer . T o find your local W ayne-Dalton dealer , refer to your local yellow pages/business listings or go to the Find a Dealer section online a t www .wayne-dalton.com 27 Limited Warranty Model 9300 Subject to the terms and conditions contained in this Limited Warra ...

  • Wayne-Dalton 9300 - page 28

    28 Please Do Not Return This Product T o The Store Covered by one or more of the following Patents 5,259,143; 5,408,724; 5,409,051; 5,419,010; 5,495,640; 5,522,446; 5,562,141; 5,566,740; 5,568,672; 5,718,533; 5,720,142; 5,836,499; 5,914,078; 6,019,269; 6,089,304; 6,442,897 Other US and Foreign P atents pending. Contact your local Wayne-Dalton deale ...

Manufacturer Wayne-Dalton Category Garage Door Opener

Documents that we receive from a manufacturer of a Wayne-Dalton 9300 can be divided into several groups. They are, among others:
- Wayne-Dalton technical drawings
- 9300 manuals
- Wayne-Dalton product data sheets
- information booklets
- or energy labels Wayne-Dalton 9300
All of them are important, but the most important information from the point of view of use of the device are in the user manual Wayne-Dalton 9300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Wayne-Dalton 9300, service manual, brief instructions and user manuals Wayne-Dalton 9300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Wayne-Dalton 9300.

Similar manuals

A complete manual for the device Wayne-Dalton 9300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Wayne-Dalton 9300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Wayne-Dalton 9300.

A complete Wayne-Dalton manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Wayne-Dalton 9300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Wayne-Dalton 9300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Wayne-Dalton 9300, that we can find in the current document
3. Tips how to use the basic functions of the device Wayne-Dalton 9300 - which should help us in our first steps of using Wayne-Dalton 9300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Wayne-Dalton 9300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Wayne-Dalton 9300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Wayne-Dalton 9300?

Use the form below

If you did not solve your problem by using a manual Wayne-Dalton 9300, ask a question using the form below. If a user had a similar problem with Wayne-Dalton 9300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)