English dropdown-ico

Manual Manley Labs MONOBLOCK AMPLIFIER

13 pages 0.04 mb
Download

Go to site of 13

Summary
  • Manley Labs MONOBLOCK AMPLIFIER - page 1

    MANLEY LABORATORIES, INC. MANLEY LABORATORIES, INC. 13880 MAGNOLIA AVE. CHINO, CA. 91710 TEL: (909) 627-4256 FAX: (909) 628-2482 OWNER'S MANUAL MANLEY 250 / 100 W ATT MONOBLOCK AMPLIFIER ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 2

    CONTENTS INTRODUCTION 3 MAINS CONNECTIONS 4 CONNECTING YOUR AMPLIFIER 5 DIAGRAM 2 TOP PANEL 6 BIAS PROCEDURES 7 OPERATIONAL NOTES 8 SPECIFICATIONS 9 WARRANTY 10 WARRANTY REGISTRATION 11 SECTION PAGE ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 3

    INTRODUCTION ! THANK YOU!... for choosing the Manley 250/100 Monoblock Amplifiers. Designed by David Manley, the Manley 250/100 Monoblock Amplifiers use only the best available components, with the shortest and cleanest signal path possible, and with the use of our own in-house CNC machine shop we can provide you with a amplifier that looks as good ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 4

    MAINS CONNECTIONS Your amplifier has been factory set to the correct mains voltage for your country. The voltage setting is marked on the serial badge, located on the rear panel. Check that this complies with your local supply. Export units for certain markets have a moulded mains plug fitted to comply with local requirements. If your unit does not ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 5

    CONNECTING YOUR AMPLIFIER Setting up your amplifiers is rather easy. 1. Connect all source components (turntable, CD, Tuner, Tape DAT, etc.) to your preamplifier. 2. Connect the interconnects from the output of the preamplifier or switching center to the RCA input on the top rear of the amplifiers. IF your source has a truly BALANCED output, connec ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 6

    4 5 6 7 INPUT RCA OUTPUT B+ MAINS FUSES IEC MAINS IN Amplifier Overhead View Tube Location OUTPUT TUBES:10 x RUSSIAN EL34G The EL34 type we recommend are the Russian up-rated EL34G. This has been proven to be the most rugged and reliable of this type and we strongly emphasize that only the RUSSIAN EL34G's should be used in this amplifier. The ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 7

    MAINS IN IEC MAINS FUSE SLO-BLO SPEAKER OUTPUT BINDING POSTS REAR VIEW OF AMPLIFIER RCA INPUT XLR BALANCED INPUT B+ FUSE SLO-BLO BALANCED UNBALANCED SWITCH ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 8

    FRONT VIEW OF AMPLIFIER WITH INSERT REMOVED SHOWING BIAS MEASUREMENT POINTS AND BIAS ADJUST POINTS FRONT VIEW OF AMPLIFIER 1 2 3 4 5 6 7 8 POWER LED STANDBY LED (BLINKING) OPERATE STANDBY EVER-WARM SOFT START SWITCH MAINS POWER ON / OFF SWITCH TETRODE TRIODE OPERATE STANDBY GROUND ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 9

    BIAS PROCEDURES The Manley 250/100 Monoblock Amplifiers uses a fixed bias system that requires very little attention. If you wish to adjust or check the bias, follow the following steps. For this procedure you will need a voltmeter (a hand held autoranging DMM digital multimeter is the easiest), a 3/32" allen key, and a small 1/8" flat sc ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 10

    OPERATIONAL NOTES SWITCHING ON -- SOFT START The MANLEY 250/100 is equipped with a SOFT-START circuit which lessens the initial stress the amplifier takes upon turn-on. We recommend that you use this soft start facility whenever you turn the amplifier on and especially when cold. 1. Ensure that the "mains" switch on the front panel is in ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 11

    SPECIFICA TIONS Vacuum Tubes: 10 x EL34G (Output), 2 x 6414 (Driver), 1 x 12AT7 (Input) Output Power TETRODE: 240 Watts (@1.5% THD 5 ohm load) TRIODE: 100 Watts (@1.5% THD 5 ohm load) Frequency Response, +/- .5 dB 10 Hz - 80 KHz Input Sensitivity 1 V Input Impedance 100 KOhm Load Impedance 5 Ohm (fixed) S/N Ratio @440W -80 dB Power Consumption 30 W ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 12

    W ARRANTY All Manley Laboratories equipment is covered by a limited warranty against defects in materials and workmanship for a period of 90 days from date of purchase to the original purchaser only. A further optional limited 5 year warranty is available to the original purchaser upon proper registration of ownership within 30 days of date of firs ...

  • Manley Labs MONOBLOCK AMPLIFIER - page 13

    WARRANTY REGISTRATION We ask that you please fill out this registration form and send the bottom half to: MANLEY LABORATORIES REGISTRATION DEPARTMENT 13880 MAGNOLIA AVE. CHINO CA, 91710 Registration entitles you to product support, full warranty benefits, and notice of product enhancements and upgrades. You MUST complete and return the following to ...

Manufacturer Manley Labs Category Stereo Receiver

Documents that we receive from a manufacturer of a Manley Labs MONOBLOCK AMPLIFIER can be divided into several groups. They are, among others:
- Manley Labs technical drawings
- MONOBLOCK AMPLIFIER manuals
- Manley Labs product data sheets
- information booklets
- or energy labels Manley Labs MONOBLOCK AMPLIFIER
All of them are important, but the most important information from the point of view of use of the device are in the user manual Manley Labs MONOBLOCK AMPLIFIER.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Manley Labs MONOBLOCK AMPLIFIER, service manual, brief instructions and user manuals Manley Labs MONOBLOCK AMPLIFIER. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Manley Labs MONOBLOCK AMPLIFIER.

Similar manuals

A complete manual for the device Manley Labs MONOBLOCK AMPLIFIER, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Manley Labs MONOBLOCK AMPLIFIER by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Manley Labs MONOBLOCK AMPLIFIER.

A complete Manley Labs manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Manley Labs MONOBLOCK AMPLIFIER - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Manley Labs MONOBLOCK AMPLIFIER, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Manley Labs MONOBLOCK AMPLIFIER, that we can find in the current document
3. Tips how to use the basic functions of the device Manley Labs MONOBLOCK AMPLIFIER - which should help us in our first steps of using Manley Labs MONOBLOCK AMPLIFIER
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Manley Labs MONOBLOCK AMPLIFIER
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Manley Labs MONOBLOCK AMPLIFIER in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Manley Labs MONOBLOCK AMPLIFIER?

Use the form below

If you did not solve your problem by using a manual Manley Labs MONOBLOCK AMPLIFIER, ask a question using the form below. If a user had a similar problem with Manley Labs MONOBLOCK AMPLIFIER it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)