English dropdown-ico

Manual Audiovox AXT-120

12 pages 0.27 mb
Download

Go to site of 12

Summary
  • Audiovox AXT-120 - page 1

    Model AXT -120 120 Watt 2-Channel Amplifier OWNER'S MANUAL ...

  • Audiovox AXT-120 - page 2

    Specifications........................................................................... 1 Precautions.............................................................................. 2 Installation Instructions............................................................ 3 Wiring Instructions........................................................... ...

  • Audiovox AXT-120 - page 3

    Input Sensitivity: Low-level 200 mV. - 2 V . High-level 2V - 10 V. Supply Voltage: 12 volts, negative ground Fuse Rating: 5 amps. Dimensions (W X H X D): 8-5/8" X 2-1/8" X 3-15/16” 219 mm X 54.3 mm X 100 mm Maximum Output Power: 120 Watts 30 watts RMS @ 4 Ohms Output Impedance: 4-8 Ohms Frequency Response: 20- 25,000Hz +/-1 dB Channel S ...

  • Audiovox AXT-120 - page 4

    1. Although this unit is designed with built-in self-protection circuits, there may be a possibility of damage if it is not wired correctly. Please follow the wiring instructions carefully for the type of system being used. 2. The last lead to be connected is the wire to the positive( ) terminal of the battery. Connect this wire only after having c ...

  • Audiovox AXT-120 - page 5

    -3- 1. Select a mounting area where the amplifier will have sufficient air circulation for proper cooling. Inadequate air circulation will cause the temperature of the amplifier to rise and will trigger the thermal protection mode. 2. Place the amplifier on the mounting surface and mark the locations of the four mounting holes as shown in the illus ...

  • Audiovox AXT-120 - page 6

    The wiring of your amplifier will depend on the system and speakers you are using but will either be a 4-Channel, 3-channel, 2-channel, or mixed-mono application. The following pages illustrate the input and output wiring for these types. Please refer to the appropriate diagrams for the system configuration you are using. The power and speaker wire ...

  • Audiovox AXT-120 - page 7

    4. Speaker Connections Depending on the type and number of speakers used with the amplifier , wire them to the speaker terminals as per the appropriate wiring diagram. For most applications, #18 gauge wire should be used for the speaker leads but in no case thinner than #20 gauge. For leads in excess of 10 feet, #16 gauge is recommended. When wirin ...

  • Audiovox AXT-120 - page 8

    -6- INPUT WIRING DIAGRAM IMPORT ANT USE EITHER HIGH-LEVEL OR LOW -LEVEL INPUT , NOT BO TH. CAR STEREO HIGH-LEVEL (SPEAKER) INPUT (WIRE SIDE VIEW) LOW -LEVEL INPUT RCA TYPE SHIELDED EXTENSION CABLES (NOT INCLU DED) 1 2 Gray Brown Black Green White HI-INPUT HI-INPUT GND GND L + L + R + R + L L R R MIN MIN MAX MAX GAIN GAIN R R L L PWR PWR Left Right ...

  • Audiovox AXT-120 - page 9

    -7- LEFT SPEAKER CAR STEREO GROUND FUSE FUSE REM BATT GND LEFT RIGHT BATTERY FOR 12 VOL T USE ONLY AUTO-ANTENNA LEAD USE # 16 GAUGE WIRE RIGHT SPEAKER 3 GROUND MET AL SECTION OF VEHICLE EXISTING SCREW OR BOL T CLEAN PAINT , RUST , DIRT OR GREASE FROM AREA FOR GOOD CONNECTION. OUTPUT WIRING DIAGRAM WARNING! NEVER COMBINE (BRIDGE ) OUTPUTS FOR USE WI ...

  • Audiovox AXT-120 - page 10

    -8- Power Indicator Lamps The Power Indicator Lamps will light to indicate that the unit is connected to the battery and that the Remote Turn-On terminal is receiving +12 volts, thus turning on the amplifier . After initial set-up, the amplifier should not require any further adjustment unless there is a change in the car stereo or speaker system w ...

  • Audiovox AXT-120 - page 11

    AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (a ...

  • Audiovox AXT-120 - page 12

    2003 Audiovox Electronics Corporation, Hauppauge, N.Y . C C 128-6564 Printed in Korea ...

Manufacturer Audiovox Category Car Amplifier

Documents that we receive from a manufacturer of a Audiovox AXT-120 can be divided into several groups. They are, among others:
- Audiovox technical drawings
- AXT-120 manuals
- Audiovox product data sheets
- information booklets
- or energy labels Audiovox AXT-120
All of them are important, but the most important information from the point of view of use of the device are in the user manual Audiovox AXT-120.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Audiovox AXT-120, service manual, brief instructions and user manuals Audiovox AXT-120. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Audiovox AXT-120.

Similar manuals

A complete manual for the device Audiovox AXT-120, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Audiovox AXT-120 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Audiovox AXT-120.

A complete Audiovox manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Audiovox AXT-120 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Audiovox AXT-120, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Audiovox AXT-120, that we can find in the current document
3. Tips how to use the basic functions of the device Audiovox AXT-120 - which should help us in our first steps of using Audiovox AXT-120
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Audiovox AXT-120
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Audiovox AXT-120 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Audiovox AXT-120?

Use the form below

If you did not solve your problem by using a manual Audiovox AXT-120, ask a question using the form below. If a user had a similar problem with Audiovox AXT-120 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)