English dropdown-ico

Manual AllTrade 835408

21 pages 0.4 mb
Download

Go to site of 21

Summary
  • AllTrade 835408 - page 1

    Model #835408 A I R C O M P R E S S O R 3 Gallon / 1.5 Peak HP 226892 If you encounter any problems or dif ficulties, Do not return your compressor to the stor e! Please contact our toll-free customer service department at: 1-800-423-3598 • 1-310-522-9008 (Califor nia Only) • www .powerbuilttools.com ...

  • AllTrade 835408 - page 2

    It is the owner and/or operator’ s responsibility to study all WARNINGS, operating, and maintenance instructions contained on the product label and instruction manual prior to operation of this unit. The owner/operator shall r etain product instructions for future refer ence. The owner and/or operator is responsible for maintenance, maintaining a ...

  • AllTrade 835408 - page 3

    Duty Cycle: This air compressor pump is capable of running continuously . However , in order to prolong the life of your air compressor , it is recommended that a 50% to 75% average duty cycle be maintained. Duty cycle r efers to the per centage of time a compressor can safely run within a given amount of time expr essed as a ratio. Example: Oil lu ...

  • AllTrade 835408 - page 4

    INTRODUCTION This oil lubricated air compressor is designed for Household Use Only and is not intended for commer cial applications. It is well suited for do-it- yourselfers with a variety of automotive and home uses. This instruction manual is intended for your benefit. Please read and follow the safety , installation, maintenance and tr oubleshoo ...

  • AllTrade 835408 - page 5

    SAFETY WARNINGS READ ALL SAFETY W ARNINGS BEFORE USING AIR COMPRESSOR. GENERAL SAFETY WARNINGS: • Keep work area clean. Messy areas and cluttered workbenches invite personal injury and/or property damage. • Keep children and visitors away . All childr en should be kept away fr om the work ar ea. DO NOT let children handle the compr essor or ext ...

  • AllTrade 835408 - page 6

    DRAIN LIQUID FROM AIR T ANK DAIL Y • Use the drain valve located on the bottom of the lower air tank to drain. Failur e to properly drain liquid from the tank will cause rust from moisture buildup, which weakens the tank and could lead to a violent tank explosion. Periodically inspect the tanks for unsafe conditions such as corrosion, cracked wel ...

  • AllTrade 835408 - page 7

    RISK OF FALLING Portable air compressors can fall from a table, workbench, or roof causing damage to the compressor and could r esult in serious injury or death to the operator . Always operate air compressor in a stable and secure position to prevent accidental movement of the unit. Never operate air compressor on a roof or other elevated position ...

  • AllTrade 835408 - page 8

    IMPROPER INST ALLA TION OF THE GROUNDING PLUG CAN RESUL T IN A RISK OF ELECTRIC SHOCK. IF REP AIR OR REPLACEMENT OF THE CORD IS NECESSARY , DO NOT CONNECT THE GROUNDING WIRE TO EITHER FLA T BLADE TERMINAL. THE WIRE WITH GREEN INSULA TION WITH OR WITHOUT YELLOW STRIPES IS THE GROUNDING WIRE. THIS PRODUCT IS FOR USE ON A NOMINAL 120-VOL T CIRCUIT AND ...

  • AllTrade 835408 - page 9

    7 COMPRESSOR FEA TURES 1 2 3 4 5 6 7 8 1 0 1 1 9 ...

  • AllTrade 835408 - page 10

    COMPRESSOR FEA TURES OIL LUBRICA TION: Oil lubricated direct drive pump with cast-iron cylinder for durability . OIL FILL SIGHT GLASS: Located on the face of the crankcase, the oil fill sight glass provides a convenient way to check the oil fill level within the pump. The oil level must be checked prior to each use to ensure proper fill level. DO N ...

  • AllTrade 835408 - page 11

    ASSEMBL Y INSTRUCTIONS THE COMPRESSOR IS SHIPPED WITHOUT OIL IN THE CRANKCASE. ADD OIL AS INDICA TED BELOW . STEP 1 – PUMP LUBRICA TION This air compressor features an oil lubricated pump that requires the use of SAE 30 weight non-detergent air compressor oil . Adding Compressor Oil: 1. Place air compr essor on a flat, level surface. 2. Remove pl ...

  • AllTrade 835408 - page 12

    STEP 2 – INSPECTION CHECK Assembly Check: In order to complete the assembly of your new air compressor , a car eful inspection should be made to ensure that all of the parts are properly aligned and securely fastened. 1. Inspect air filter to ensure that it is installed and secure. 2. Check oil fill level in crankcase. OPERA TION INITIAL SETUP / ...

  • AllTrade 835408 - page 13

    MAINTENANCE DISCONNECT AIR COMPRESSOR FROM POWER SOURCE AND BLEED OFF ALL AIR PRESSURE BEFORE A TTEMPTING ANY MAINTENANCE OR REP AIR. SHUTDOWN AND STORAGE: NOTE: NEVER stop the air compressor by unplugging it fr om the power outlet as this may result in damage to the compressor . 1. T urn the switch to the OFF position 2. Disconnect the power cord ...

  • AllTrade 835408 - page 14

    CHECKING SAFETY RELIEF V AL VE: SAFETY RELIEF V AL VE MUST BE REPLACED IF IT CANNOT BE ACTUA TED OR IT LEAKS AIR AFTER THE RING IS RELEASED. 1. The air compressor must be turned OFF . 2. Disconnect compr essor fr om the power sour ce. 3. Open tank drain to bleed off all air pressure before attempting any maintenance or r epair . 4. Allow compressor ...

  • AllTrade 835408 - page 15

    13 TROUBLESHOOTING GUIDE Problem Encountered Possible Cause Possible Solution The compressor does not start or restart: Power cord not plugged in. Plug cord into grounded outlet. Motor/Pressur e switch in OFF position Move switch to AUTO position. Motor thermal overload switch has tripped. T urn air compressor off, wait until the motor is cool, the ...

  • AllTrade 835408 - page 16

    14 TROUBLESHOOTING GUIDE Problem Encountered Possible Cause Possible Solution Air continues to leak at motor/pressur e switch release valve while motor is running: Defective motor/pressure switch. Replace. Check valve stuck in open position. Replace check valve. DANGER — Do not disassemble the check valve with tank pressurized. Open tank petcock ...

  • AllTrade 835408 - page 17

    P ARTS LIST 15 NO. P ART NO. DESCRIPTION QTY NO. P ART NO. DESCRIPTION QTY 1 835408-1 Head Bolt 4 53 835408-53 Gauge (0-200psi) 1 2 835408-2 Spring Washer 8 54 835408-54 Safety V alve (140psi) 1 3 835408-3 Cylinder Head 1 55 835408-55 Gauge (0-200psi) 1 4 835408-4 Exhaust Elbow 1 56 835408-56 Strain Relief 2 5 835408-5 Cylinder Head Gasket 1 57 835 ...

  • AllTrade 835408 - page 18

    16 P ARTS DIAGRAM ...

  • AllTrade 835408 - page 19

    ONE YEAR LIMITED W ARRANTY ALL TRADE TOOLS LLC AIR COMPRESSORS Express and Exclusive Limited W arranty to Original Retail Buyer Alltrade T ools LLC (hereinafter “Alltrade”) expressly warrants to the original retail purchaser of the accompanying air compressor and no one else all parts of the product (except those parts r eferred to below which ...

  • AllTrade 835408 - page 20

    Alltrade will not be liable for the following: labor charges, loss or damage resulting from impr oper operation, maintenance or repairs made by other persons; pre-delivery services such as assembly , oil or lubricants, and adjustment; maintenance services that are normally required to maintain the air compr essor . The use of other than genuine All ...

  • AllTrade 835408 - page 21

    WEAR SAFETY GLASSES WARNING ¥ ADVERTENCIA USE GAFAS DE SEGURIDAD 1431 VIA PLA T A LONG BEACH, CA 90810-1462 www .alltradetools.com MADE IN / FABRI Q UÉ EN / HECHO EN CHINA © COPYRIGHT 2005, ALL TRADE TOOLS LLC REV . 1 ...

Manufacturer AllTrade Category Air Compressor

Documents that we receive from a manufacturer of a AllTrade 835408 can be divided into several groups. They are, among others:
- AllTrade technical drawings
- 835408 manuals
- AllTrade product data sheets
- information booklets
- or energy labels AllTrade 835408
All of them are important, but the most important information from the point of view of use of the device are in the user manual AllTrade 835408.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AllTrade 835408, service manual, brief instructions and user manuals AllTrade 835408. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AllTrade 835408.

Similar manuals

A complete manual for the device AllTrade 835408, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AllTrade 835408 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AllTrade 835408.

A complete AllTrade manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AllTrade 835408 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AllTrade 835408, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AllTrade 835408, that we can find in the current document
3. Tips how to use the basic functions of the device AllTrade 835408 - which should help us in our first steps of using AllTrade 835408
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AllTrade 835408
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AllTrade 835408 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AllTrade 835408?

Use the form below

If you did not solve your problem by using a manual AllTrade 835408, ask a question using the form below. If a user had a similar problem with AllTrade 835408 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)