English dropdown-ico

Manual Siig ID-DS0711-S1

20 pages Not applicable
Download

Go to site of 20

Summary
  • Siig ID-DS0711-S1 - page 1

    1 Introduction The 2-Port RS-232/422/485 Serial over IP Ethernet Device Server is designed to operate serial ports over 10/100 Mbps Ethernet networks, transmitting via TCP/IP protocol. Features and Benefits • ARM Cortex-M3 32-bit high performance CPU • Auto reset on Idle detection • Easy to use Web Server Management • 115.2Kbps data through ...

  • Siig ID-DS0711-S1 - page 2

    2 RS-232/422/ 485 (Port 2) RS-232 (Port 1) DC-In (power) LAN Reset Button LED Indicators (SYS, Port-2, Port-1) Package Contents • 2-Port RS-232/422/485 Serial over IP Ethernet Device Server • Power adapter • Software CD and installation guide Layout Figure 1: Layout • Sys: LED flashes every second when the Serial over IP Ethernet Device Ser ...

  • Siig ID-DS0711-S1 - page 3

    3 Device Server Configuration Follow the instructions below to configure your Serial over IP Ethernet Device Server , if needed. The default IP address of the Serial over IP Ethernet Device Server is 192.168.0.100 . Before you configure the IP of your Serial Device Server , make sure the IP of your PC/NB is in the same network domain as the Serial ...

  • Siig ID-DS0711-S1 - page 4

    4 4. Click the Modify MAC button and change the MAC address from the prompted Dialog Frame window, if needed. 5. Click the Web Browse button to open the Web Browser Configuration webpage. See Figure 6. Figure 4 1. Double click IP Search Utility in the included software CD, then double click CVBrowser... to enable the tool. 2. Click the Refresh butt ...

  • Siig ID-DS0711-S1 - page 5

    5 Type in password and click the Login button, then make your changes from the Web Browser Configuration webpage. See the section for more information. Web Console Configuration In addition to basic IP address and subnet mask, specific device settings can be set through HTTP protocol with popular browsers, e.g. Internet Explorer, Firefox, etc. Setu ...

  • Siig ID-DS0711-S1 - page 6

    6 • Firmware version : The Serial over IP Ethernet Device Server's firmware version is identified by date code. • Serial number : Product serial number as provided by the factory • Ethernet MAC address : The unique MAC (Media Access Control) address used for identification by the Ethernet network • Password and Login : This field is th ...

  • Siig ID-DS0711-S1 - page 7

    7 • Subnet mask : Subnet mask of 255.255.255.0 is usually used for small networks, 255.255.0.0 for larger networks. If your IP address is provided by an ISP or network administrator, please obtain that information and enter it correctly. If DHCP client mode is enabled and there's a DHCP server on the network, this field will be assigned by t ...

  • Siig ID-DS0711-S1 - page 8

    8 Figure 8 • Serial I/O Port 1 (RS-232) : One RS-232 serial port for connecting RS-232 serial device • Serial I/O Port 1 (RS-422/485) : One RS-422/485 serial port for connecting RS-422/485 serial device • Local Port : A socket port assigned to the serial port. It's a 16-bit number, ranging from 1 to 65535. Because the numbers below 1000 ...

  • Siig ID-DS0711-S1 - page 9

    9 • Interface - Port 1 - RS232 GTxD, RxD for data stream, no flow control - RS232 (RTS/CTS) GTxD, RxD for data stream, RTS/CTS for flow control • Interface - Port 2 : The Auto Detect feature will detect the connected serial device's interface as RS-422 or RS-485 automatically - RS485 (Half duplex): Half duplex RS-485 interface, RTS for dri ...

  • Siig ID-DS0711-S1 - page 10

    10 Device Server Updated Press the Update button after you complete your changes. The Serial over IP Ethernet Device Server will save all setting into internal non-volatile memory and then reboot. The Web Console webpage will refresh in around 5 seconds. NOTE : If Controller Updated/Now restarting doesn't show up after clicking the update butt ...

  • Siig ID-DS0711-S1 - page 11

    11 COM Port Setup IMPORTANT : Copy the VirtualCOM folder from your driver CD to your PC's hard drive, then follow the instructions below to add the virtual COM port. 1. Open the VirtualCOM folder, double click 32-bit or 64-bit folder ( based on your system), then double click VSerPortConsole . 2. Enter the VSerPortConsole main menu, right clic ...

  • Siig ID-DS0711-S1 - page 12

    12 4 . Click Install this driver anyway or Continue Anyway , then a COM port would be assigned. 5. Right click under the assigned COM port and click Add Net . Figure 12 COM 3 Add Net 6. Type in the IP address of the Serial over IP Ethernet Device Server in the Remote Address field. 7. Type in the Serial I/O Port's Local port number to the Remo ...

  • Siig ID-DS0711-S1 - page 13

    13 8. A (Unconnceted) TCP Client... will be established. Figure 14 (Unconnected) TCP Client... 9. Right click on the Virtualserial Port Console , click Add Port , then follow steps 3-7 to add the second serial port, if needed. 10. Close the Virtualserial Port Console and reopen it to make sure the COM port is successfully added. 11. Go to the Self- ...

  • Siig ID-DS0711-S1 - page 14

    14 Figure 15 Enter a terminal name, choose an icon, and press OK button. Figure 16 ...

  • Siig ID-DS0711-S1 - page 15

    15 Figure 17 Sele ct the assigned COM port at the Connect using field, see Figure 17 . For example, if the virtual COM port was assigned COM 3, then select COM 3. Figure 18 Select the same values with the Controller Setup to the COMX Properties , then click OK . ...

  • Siig ID-DS0711-S1 - page 16

    16 If Hyper Terminal connects with the Serial over IP Ethernet Device Server successfully, the time clock at the lower left corner, Connected hh:mm:ss , will start counting, see Figure 19 . Figure 19 H yper Terminal for COM Port Initiate another Hyper Terminal as a COM Port Terminal. Select COM 1 or other COM port. Set the COM port properties to th ...

  • Siig ID-DS0711-S1 - page 17

    17 Wiring Architecture PC Ethernet switch / hub RS-232 RS-232 (RTS / CTS) LAN cable Serial Device Rx Tx GND RTS CTS Serial to TCP/IP Tx Rx GND CTS RTS Serial Device Rx Tx GND Serial to TCP/IP Tx Rx GND RS-422 RS-485 Serial Device D - D+ Serial to TCP/IP D - D+ Serial Device Rx- Rx+ Tx- Tx+ Serial to TCP/IP Tx- Tx+ Rx- Rx+ Pin Assignment RS-232 (Por ...

  • Siig ID-DS0711-S1 - page 18

    18 FAQ Q1 . Why can't ETM.exe detect the Serial over IP Ethernet Device Server on the network? A1 . Please check the followings: (1) The power adapter is properly connected and powerd on ; (2) The network cable is properly connected between the Device Server and the computer; (3) The anti-virus program and Firewall utility are disabled; (4) Th ...

  • Siig ID-DS0711-S1 - page 19

    19 Technical Support and Warranty QUESTIONS? SIIG ’ s Online Support has answers! Simply visit our web site at www.siig.com and click Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analyst ...

  • Siig ID-DS0711-S1 - page 20

    About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the connection between Desktop/ Notebook systems and external peripherals. SIIG continues to grow by adding A/V and Digital Signage connectivity solu ...

Manufacturer Siig Category Server

Documents that we receive from a manufacturer of a Siig ID-DS0711-S1 can be divided into several groups. They are, among others:
- Siig technical drawings
- ID-DS0711-S1 manuals
- Siig product data sheets
- information booklets
- or energy labels Siig ID-DS0711-S1
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siig ID-DS0711-S1.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siig ID-DS0711-S1, service manual, brief instructions and user manuals Siig ID-DS0711-S1. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siig ID-DS0711-S1.

Similar manuals

A complete manual for the device Siig ID-DS0711-S1, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siig ID-DS0711-S1 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siig ID-DS0711-S1.

A complete Siig manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siig ID-DS0711-S1 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siig ID-DS0711-S1, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siig ID-DS0711-S1, that we can find in the current document
3. Tips how to use the basic functions of the device Siig ID-DS0711-S1 - which should help us in our first steps of using Siig ID-DS0711-S1
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siig ID-DS0711-S1
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siig ID-DS0711-S1 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siig ID-DS0711-S1?

Use the form below

If you did not solve your problem by using a manual Siig ID-DS0711-S1, ask a question using the form below. If a user had a similar problem with Siig ID-DS0711-S1 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)