English dropdown-ico

Manual Porter-Cable 3802

21 pages 1.05 mb
Download

Go to site of 21

Summary
  • Porter-Cable 3802 - page 1

    ESP AÑOL: PÁGINA 21 FRANÇAISE : P AGE 41 12" Compound Miter Saw Instruction Manual Part No. 900988 - 11-30-00 The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for futur e refer ence. Model No. _____________________________________ T ype ___________________________ ...

  • Porter-Cable 3802 - page 2

    IMPORT ANT SAFETY INSTRUCTIONS SA VE THESE INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS. This tool was designed for certain applications.DO NOT modify or use it for any application other than for which it was designed. If you have any questions relative to its application do not use the tool until you have written Porter -Cable and we have advised ...

  • Porter-Cable 3802 - page 3

    3 25. WARNING: SOME DUST CREA TED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer , birth defects or other repr oductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry pr oducts, and ...

  • Porter-Cable 3802 - page 4

    4 4 REPLACEMENT P AR TS When servicing, use only identical replacement parts. POLARIZED PLUGS: T o r educe the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not f ...

  • Porter-Cable 3802 - page 5

    UNP ACKING 1. Car efully remove the machine fr om the carton. Retain all packing materials until you have inspected and satisfactorily operated the machine. WARNING: Do not connect the machine to the power source until you have r ead and understood this entire instruction manual. 2. Place the machine on a firm, level surface with extra room for han ...

  • Porter-Cable 3802 - page 6

    6 6 MOVING T ABLE TO THE 0 DEGREE CUT -OFF POSITION 1. Rotate locking knob (A) Fig. 6, counter -clockwise as far as it will go to unlock. Depr ess lever (B) and rotate table (C) to the 0 degree straight cut-of f position, release lever (B) and tighten locking knob (A). 2. Fig. 7, illustrates the table (C) in the 0 degree straight cut-of f position. ...

  • Porter-Cable 3802 - page 7

    7 7 3. Use a straight edge (C) Fig. 7C, to make the extension table (B) even with saw table (D), and tighten the two screws (A) Fig. 7B. 4. Attach the fence slide support (E) Fig. 7D, to the extension table (B) by using the two 1 1/4” long hex head screws, 5/16” lockwashers and 5/16” flat washers (F). Bring scr ews up through the two holes (G ...

  • Porter-Cable 3802 - page 8

    9. Position lock handle (M) Fig. 7J, on stud and replace scr ew and spring (L) that were removed in STEP 7 . NOTE: Lock handle (M) is spring-loaded and can be repositioned by lifting up on handle. A TT ACHING DUST BAG Depress spring clips (A) Fig. 8, of dust bag (B) and clip dust bag (B) onto end of dust chute. F ASTENING MACHINE TO SUPPORTING SURF ...

  • Porter-Cable 3802 - page 9

    9 9 DANGER: A TURNING SAW BLADE CAN BE DANGEROUS. AFTER COMPLETING CUT , RELEASE SWITCH TRIGGER (A) FIG. 12, TO ACTIV A TE BLADE BRAKE. KEEP CUTTINGHEAD DOWN UNTIL BLADE HAS COME TO A COMPLETE STOP . WARNING: THE TORQUE DEVELOPED DURING BRAKING MA Y LOOSEN THE ARBOR SCREW . THE ARBOR SCREW SHOULD BE CHECKED PERIODICALL Y AND TIGHTENED IF NECESSAR Y ...

  • Porter-Cable 3802 - page 10

    10 10 T o adjust the sliding fit between the movable table and the base, turn nut (A) Fig. 14, clockwise to increase the sliding fit (opposite to decrease the fit). This adjustment should not be so tight that it restricts the r otating movement of the table, or so loose that it affects the accuracy of the saw . ADJUSTING FENCE 90 DEGREES TO BLADE I ...

  • Porter-Cable 3802 - page 11

    11 11 A TT ACHING OPTIONAL WORK CLAMP The work clamp is an important accessory . After purchase, the work clamp can be attached to any one of the four holes (A) Fig. 18, provided on the base of the machine, (three of which ar e shown). 1. Thread lock knob (B) Fig. 19, into thr eaded hole where the clamp will be inserted. Place post (C) of work clam ...

  • Porter-Cable 3802 - page 12

    12 1. The cuttinghead of your compound miter saw can be tilted to cut any bevel angle from a 90 degr ee straight cut-off to a 45 degr ee left bevel angle by loosening bevel lock handle (A) Fig. 23, tilting cuttinghead (B) to the desired angle, and tightening lock handle (A). 2. Positive stops are pr ovided to rapidly position the saw blade at 90 an ...

  • Porter-Cable 3802 - page 13

    13 13 ADJUSTING 0 AND 45 DEGREE BEVEL POSITIVE STOPS 1. DISCONNECT THE SAW FROM THE POWER SOURCE. 2. Adjust saw so that both bevel and miter pointers are set at 0 degrees. Tighten bevel lock handle and lock cuttinghead in down position. 3. Place one end of a square (A) Fig. 27 on the table and the other end against the blade. The blade should be se ...

  • Porter-Cable 3802 - page 14

    14 14 Correct adjustment pr ovides for a good snug sliding fit between these two parts. This adjustment should not be so tight that it restricts the tilting movement of the trunnion (A) when bevel cutting, or so loose that it af fects the accuracy of the saw cut. ADJUSTING THE TENSION OF CUTTINGHEAD RETURN SPRING The tension of the cuttinghead retu ...

  • Porter-Cable 3802 - page 15

    15 15 TYPICAL OPERA TIONS AND HELPFUL HINTS 1. Before cutting, make certain the cutting arm and table area ar e at their correct settings and firmly locked in place. 2. Before cutting, determine that the workpiece is the right size for the saw . 3. Place the workpiece on the table and hold or clamp it firmly against the fence. Fig. 35 illustrates t ...

  • Porter-Cable 3802 - page 16

    16 16 CUTTING BOWED MA TERIAL 1. When cutting flat pieces, first check to see if the material is bowed. If it is, make sure the material is positioned on the table as shown in Fig. 39. 2. If the material is positioned the wrong way , as shown in Fig. 40, the workpiece will pinch the blade near the completion of the cut. CONSTRUCTING WORK SUPPORT EX ...

  • Porter-Cable 3802 - page 17

    17 17 CUTTING CROWN MOULDING One of the many features of the saw is the ease of cutting crown moulding. The following is an example of cutting both inside and outside corners on 52/38 degree wall angle crown moulding. NOTE: The following procedur e for inside or outside crown molding corners is the same with the exception that the bevel position wi ...

  • Porter-Cable 3802 - page 18

    18 18 MAINTENANCE CHANGING THE BLADE WARNING: USE ONL Y CROSS-CUTTING SAW BLADES. DO NOT USE BLADES WITH DEEP GULLETS AS THEY CAN DEFLECT AND CONT ACT GUARD 1. Use only 12" diameter blades with 1" arbor holes that are rated for 4200 RPM or higher . 2. DISCONNECT MACHINE FROM THE POWER SOURCE. 3. Loosen screw (A) Fig. 46, with wr ench (B) ...

  • Porter-Cable 3802 - page 19

    19 19 BRUSH INSPECTION AND REPLACEMENT CAUTION: BEFORE INSPECTING BRUSHES, DISCONNECT THE MACHINE FROM THE POWER SOURCE. Brush life varies, depends on the load on the motor . Check the brushes after the first 50 hours of use of a new machine, or after a new set of brushes has been installed. After the first check, examine them after about 10 hours ...

  • Porter-Cable 3802 - page 20

    20 20 NOTES ...

  • Porter-Cable 3802 - page 21

    The following are trademarks of POR TER-CABLE Corporation (Las siguientes son marcas registradas de POR TER-CABLE S.A.) (Les marques suivantes sont des marques de fabriquant de la POR TER-CABLE Corporation): BAMMER ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , PORT A-BAND ® , PORT A-PLANE ® , PORTER- CABLE ® , QUICKSAND ® , SANDTRAP ® , S ...

Manufacturer Porter-Cable Category Saw

Documents that we receive from a manufacturer of a Porter-Cable 3802 can be divided into several groups. They are, among others:
- Porter-Cable technical drawings
- 3802 manuals
- Porter-Cable product data sheets
- information booklets
- or energy labels Porter-Cable 3802
All of them are important, but the most important information from the point of view of use of the device are in the user manual Porter-Cable 3802.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Porter-Cable 3802, service manual, brief instructions and user manuals Porter-Cable 3802. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Porter-Cable 3802.

Similar manuals

A complete manual for the device Porter-Cable 3802, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Porter-Cable 3802 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Porter-Cable 3802.

A complete Porter-Cable manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Porter-Cable 3802 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Porter-Cable 3802, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Porter-Cable 3802, that we can find in the current document
3. Tips how to use the basic functions of the device Porter-Cable 3802 - which should help us in our first steps of using Porter-Cable 3802
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Porter-Cable 3802
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Porter-Cable 3802 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Porter-Cable 3802?

Use the form below

If you did not solve your problem by using a manual Porter-Cable 3802, ask a question using the form below. If a user had a similar problem with Porter-Cable 3802 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)