-
Dixon SPDZTR 30 BF - page 1
SPDZTR 30 / 966043101 SPDZTR 30 BF / 966064401 Please read the operator’ s manual car efully and mak e sur e you understand the instructions befor e using the machine. Operator Man ual ...
-
Dixon SPDZTR 30 BF - page 2
©2009 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A. T o implement improvements, specications and designs can be altered without prior notication. Note that no legal demands can be placed based on the information contained in these instructions. Use only original parts for repairs. The use of other parts voids the warranty . Do no ...
-
Dixon SPDZTR 30 BF - page 3
INTRODUCTION ............................................................... 5 General ....................................................................... 5 Driving and T ranspor t on Public Roads ...................... 5 T owing ......................................................................... 5 Operating ..... ...
-
Dixon SPDZTR 30 BF - page 4
W ARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower . Each person operating the mower must be of sound mind and body and must not be under the in ...
-
Dixon SPDZTR 30 BF - page 5
5 Congratulations Thank you for purchasing a Dixon ride-on mower . This machine is built for superior efciency to rapidly mow primarily large areas. A contr ol panel easily accessible to the operator and a hydrostatic transmission regulated by steering contr ols both contribute to the machine’s perfor mance ...
-
Dixon SPDZTR 30 BF - page 6
6 Good Service Dixon’s products ar e sold only in specialized retail stores with complete service. This ensur es that you as a customer receive only the best support and service. Before the pr oduct is delivered, the machine has, for example, been inspected and adjusted by your retailer . See the cer ticate ...
-
Dixon SPDZTR 30 BF - page 7
7 These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. IMPORT ANT INFORMA TION Xxxx xxxxxx xxxxx xxxx xxxxxxxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxx xxxxxx. R N Reverse Neutral Fast Slow Choke Fuel W arning! Parking Brake CE ...
-
Dixon SPDZTR 30 BF - page 8
8 Read Shut off engine and Keep a safe Use on slopes No passengers Operator’s remove key befor e distance fr om no greater Manual perfor ming any the machine than 10° maintenance or repair work Whole body Severing of ngers Do not open or Careful backing up, Careful going exposure to and ...
-
Dixon SPDZTR 30 BF - page 9
9 Read the operator’ s manual bef ore star ting the machine Clear the area of objects bef ore mowing 8011-512 8011-513 W ARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety . W ARNING! THIS CUTTING MACHINE IS CAP ABLE OF AMPUT A TING HANDS AND FEET AND THROWING OBJECTS. F ...
-
Dixon SPDZTR 30 BF - page 10
10 8011-520 Ne ver tak e passengers Operate machine only in daylight or good articial • light. Do not operate the machine while under the • inuence of alcohol or drugs. W atch for trafc when operating near or crossing • roadways. Use extra care when loading or unloading the • machine into a trailer or truck. Alwa ...
-
Dixon SPDZTR 30 BF - page 11
11 8011-670a P ersonal protective equipment 6003-004 Mow up and do wn, not side to side W ARNING! Do not drive up or down hills with slopes greater than 10 degrees. And do not drive across any slopes. Personal Safety Equipment Make sure that you have rst aid equipment close • at hand when using the machine. Never use the mac ...
-
Dixon SPDZTR 30 BF - page 12
12 8011-509 Be e xtra cautious when driving on slopes 8011-517 Ne ver allo w children to operate the machine 8011-518 K eep children awa y from work area Do not use on steep slopes. • Do not try to stabilize the machine by putting your • foot on the ground. Do not mow near drop-of fs, ditches, or • embankments. The machine ...
-
Dixon SPDZTR 30 BF - page 13
13 8011-516 Ne ver fill the fuel tank indoors Safe Handling of Gasoline T o avoid personal injur y or property damage, use extreme car e in handling gasoline. Gasoline is extremely ammable and the vapors ar e explosive. Extinguish all cigarettes, cigars, pipes, and other • sources of ignition. Use only approved gasoline con ...
-
Dixon SPDZTR 30 BF - page 14
14 8011-515 Never drive the machine in an enclosed space General Maintenance Never operate machine in a closed area. • Keep all nuts and bolts tight to be sure the • equipment is in safe working condition. Never tamper with safety devices. Check their • proper operation r egularly . Keep machine free of grass, leaves, or ot ...
-
Dixon SPDZTR 30 BF - page 15
15 Sparking can occur when working with the battery and the heavy cables of the starter circuit. This can cause battery explosion, re or eye injury . Sparking in this circuit can not occur after the chassis cable (normally negative, black) is removed from the battery . Use protective goggles. • Ensure that the fuel ller c ...
-
Dixon SPDZTR 30 BF - page 16
16 8011-514 Regularly clean deck Regularly clean deck and underside of deck, • avoid spraying engine and electrical components with water . W ARNING! Escaping hydraulic oil under pressure can have sufcient force to penetrate the skin, causing serious injury . If injured by escaping uid, see a doctor at once. Serious infec ...
-
Dixon SPDZTR 30 BF - page 17
17 This operator’s manual describes the Dixon Zero T ur n Rider . The rider is tted with a Briggs & Stratton four - stroke overhead valve engine. Control Locations T ransmission from the engine is made via belt-driven hydraulic pumps. Using the left and right steering controls, t ...
-
Dixon SPDZTR 30 BF - page 18
18 8050-003 Steering controls Steering Control Levers The machine’s speed and direction ar e continuously variable using the two steering controls. The steering controls can be moved forwar d or backward about a neutral position. Further more, ther e is a neutral position, which is locked if the steering controls ar e mov ...
-
Dixon SPDZTR 30 BF - page 19
19 8050-005 P ar king brake not activ ated Throttle Control The throttle contr ol regulates the engine speed and thereby the rate of r otation of the blades. T o increase or decr ease the engine speed, the control is moved forward or back r espectively . Avoid idling the engine for long periods, as ther e is a risk of fouli ...
-
Dixon SPDZTR 30 BF - page 20
20 8050-007 Choke control Choke Control The choke control is used for cold starts in order to provide the engine with a richer fuel mixtur e. For cold starts the throttle knob should be pushed forward all of the way . Refueling Read the safety instructions before r efueling. The machine has one fuel tank, just behind the se ...
-
Dixon SPDZTR 30 BF - page 21
21 Fuel Shut Off V alve The fuel shut off valve is located in the fuel line under the seat. Tilt seat forward for access. The fuel valve is ON when the valve is parallel to the fuel line. Rotate the valve ¼ turn clockwise to tur n fuel OFF . 8050-010 Fuel shut off valv e in the OPEN position. 8050-014 The mower dec k’ s ...
-
Dixon SPDZTR 30 BF - page 22
22 Manual T ransport When pushing or pulling the mower , be sure to engage the EZT Hydrogear bypass linkages. The EZT bypass linkages are located on the r ear of the frame, below the rear engine guar d. Raise the deck into the highest cutting position. • Pull the EZT bypass linkages out and into the • slots. Release lin ...
-
Dixon SPDZTR 30 BF - page 23
23 Read “Safety Instructions” section and following pages, if you are unfamiliar with the machine. T raining Zero turn mowers are far mor e maneuverable than typical riding mowers due to their unique steering capabilities. We suggest that this section be reviewed in its entir ety prior to attempting to move the mowe ...
-
Dixon SPDZTR 30 BF - page 24
24 Before Starting Read the sections Safety Instructions and • Controls befor e star ting the machine. Perfor m the daily maintenance before starting • (see Maintenance Schedule in the Maintenance section). Check that there is sufcient fuel in the fuel tank. • Adjust the seat to the desired position. • The fo ...
-
Dixon SPDZTR 30 BF - page 25
25 Move the steering controls outwar d to the locked (outer) neutral position. Move the throttle to the middle position. 8050-008 Set the throttle 8050-008 Place controls in neutral position If the engine is cold, the choke control should be pushed forward to its extent. 8050-007 Choke control ...
-
Dixon SPDZTR 30 BF - page 26
26 Open the fuel valve. Press in and turn the ignition key to the start position 8050-135 T ur n to ST ART position STOP When the engine starts, immediately release the ignition key back to the run position. 8050-136 Release ignition to the R UN position IMPORT ANT INFORMA TION Do not run the starter for more than 5 sec ...
-
Dixon SPDZTR 30 BF - page 27
27 Slowly slide the choke control back to the middle position when the engine has started. Set the desired engine speed with the thr ottle. Allow the engine to run at a moderate speed, “half throttle” for 3-5 minutes before loading it to heavily . USE FULL THROTTLE WHEN MOWING (no choke). W ARNING! Engine exhaust an ...
-
Dixon SPDZTR 30 BF - page 28
28 Running Release the parking brake by moving the lever 1. downward. NOTE: The mower is equipped with an operator presence system. When the engine is running, any attempt by the operator to leave the seat without rst setting the parking brake will shut off the engine. Move the steering controls to the neutral positi ...
-
Dixon SPDZTR 30 BF - page 29
29 Operating on Hills Read the Safety Instructions “Driving on Slopes” in the “Safety Instructions”. The slowest speed possible should be used • before starting up or down hills. Avoid stopping or changing speed on hills. • If stopping is absolutely necessary , pull drive • levers into the neutral position ...
-
Dixon SPDZTR 30 BF - page 30
30 8011-603 Mowing pattern Mowing Tips Observe and ag rocks and other xed objects to • avoid collisions. Begin with a high cutting height and reduce it until • the desired mowing r esult is attained. The average lawn should be cut to 2½" (64 mm) during the cool season and over 3" (76 mm) during the ...
-
Dixon SPDZTR 30 BF - page 31
31 Stopping the Engine Allow the engine to idle a minute in order to attain normal operating temperature before stopping it, if it has been worked hard. A void idling the engine for longer periods, as there is a risk of the spark plugs fouling. Disengage the mower deck by sliding the blade • control lever out of the l ...
-
Dixon SPDZTR 30 BF - page 32
32 Manual T ransport When pushing or pulling the mower , be sure to engage the EZT Hydrogear bypass linkages. The EZT bypass linkages are located on the r ear of the frame, below the rear engine guar d. Raise the deck into the highest cutting position. • Pull the EZT bypass linkages out and into the • slots. Release ...
-
Dixon SPDZTR 30 BF - page 33
33 Maintenance Schedule The following is a list of maintenance procedur es that must be perfor med on the machine. For those points not described in this manual, visit an authorized service workshop. An annual service carried out by Maintenance Daily Wkly At least once each year Maintenance interval in hours Before ...
-
Dixon SPDZTR 30 BF - page 34
34 W ARNING! Before performing any service or adjustment checklist: Engage the parking brake. • Place the Blade-switch in the disengaged position. • T urn the ignition switch to “OFF” position and remove the key . • Make sure the blades and all moving parts have completely stopped. • Disconnect the spar ...
-
Dixon SPDZTR 30 BF - page 35
35 Battery Y our mower is equipped with a maintenance free battery that does not need servicing. However , periodic charging of the battery with an automotive type battery charger will extend its life. Keep battery and ter minals clean. • Keep battery bolts tight. • Recharge at 6-10 amperes for 1 hour • T o c ...
-
Dixon SPDZTR 30 BF - page 36
36 Ignition System The engine is equipped with an electronic ignition system. Only the spark plugs requir e maintenance. For recommended spark plugs, see T echnical Data. 1. Remove the ignition cable boot and clean around the spark plug. 2. Remove the spark plug with a spark plug socket wrench. 3. Check the spark p ...
-
Dixon SPDZTR 30 BF - page 37
37 Engine Cooling Air Intake Check that the engine’s cooling air intake is free fr om leaves, grass, and dirt. If the cooling air intake is clogged, engine cooling deteriorates, which can lead to engine damage. The cooling air intakes rotates when the engine is running. Keep hands away until intake is idle. Engin ...
-
Dixon SPDZTR 30 BF - page 38
38 Parking Brake Visually check that no damage is found on the lever , links, or switch belonging to the parking brake. Perfor m a standstill test and check that there is sufcient braking action. T o adjust the parking brake, contact the Dixon service workshop. W ARNING! Faulty adjustments can result in reduced ...
-
Dixon SPDZTR 30 BF - page 39
39 W ARNING! The engine and the exhaust system, become very hot during operation. Risk for burns if touched. Allow engine and exhaust system to cool at least two (2) minutes. EZT Belt T o replace EZT belt Park the mower on a level surface. Engage the park brake. EZT belt removal NOTE: Be careful not to damage the f ...
-
Dixon SPDZTR 30 BF - page 40
40 Adjusting the Mower Deck Check the tire pr essure before adjustment of the mower deck. See “Checking Tire Pr essure” in Maintenance section. Faulty mower deck adjustments will cause an uneven mowing result. Leveling deck Position the mower on a level, preferably 1. concrete, surface. Check the pressur e in a ...
-
Dixon SPDZTR 30 BF - page 41
41 Caster Wheels Check every 200 hours. Check that wheels rotates freely . If wheels do not rotate fr eely take the unit to your dealer for service. Foam lled tires or solid tir es will void the warranty . Removal and installation of caster wheel Remove nut (1) and caster bolt (2). 1. Pull the wheel out of the f ...
-
Dixon SPDZTR 30 BF - page 42
42 General Remove the ignition key to prevent unintentional movements during lubrication. When lubricating with an oil can, it must be lled with engine oil. When lubricating with grease, unless otherwise stated, use a high grade molybdenum disulphide grease. For daily use, the machine should be lubricated twice ...
-
Dixon SPDZTR 30 BF - page 43
43 Front Wheel Mount Lubricate with a grease gun, one zerk for each wheel mount, until the grease is for ced out. Use only good quality bearing grease. Grease fr om well-known brand names (petrochemical companies, etc.) usually maintains a good quality . Front Wheel Bearings Lubricate with a grease gun, one zerk f ...
-
Dixon SPDZTR 30 BF - page 44
44 Problem Cause The engine will not start. Blade lever is engaged. Steering controls ar e not locked in neutral position. Driver is not sitting in driver’s seat. Parking brake is not activated. Battery is dead. Contamination in carburetor or fuel line. Fuel supply is closed or tap for fuel tank is in ...
-
Dixon SPDZTR 30 BF - page 45
45 Problem Cause The engine seems weak. Clogged air lter . Fouled spark plugs. Carburetor incorr ectly adjusted. The engine overheats. Clogged air intake or cooling ns. Engine overloaded. Poor ventilation around engine. Defective engine speed regulator . Soot in the combustion chamber . T oo littl ...
-
Dixon SPDZTR 30 BF - page 46
46 Winter Storage At the end of the mowing season, the machine should be readied for storage (or if it will not be in use for longer than 30 days). Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues that can plug the carbur etor and disrupt engine function. Fuel stabilizers are an accep ...
-
Dixon SPDZTR 30 BF - page 47
47 8050-050 ...
-
Dixon SPDZTR 30 BF - page 48
48 *The power rating of the engines indicated is the average net power output (at specied rpm) of a typical production engine for the engine model measured to SAE standar d J1349/ISO1585. Mass production engines may dif fer from this value. Actual power output for the engine installed in the nal m ...
-
Dixon SPDZTR 30 BF - page 49
49 Spdztr 30 / 966043101 Frame Cutting Width 30" / 76 cm Cutting Height 1½ - 4" / 3.8 - 10.2 cm Uncut Circle 0 Number of Blades 1 Blade Length 30" / 76 cm Sprung Seat Standard Blade Engagement Belt idler Deck Construction 11 gauge stamped Productivity 1.6 acres /h 5667 m 2 /h Dimension W ...
-
Dixon SPDZTR 30 BF - page 50
50 Engine crankshaft bolt 50 ft/lb (67 Nm) Deck pulley bolts 150 ft/lb (203 Nm) Lug nuts 75 ft/lb (100 Nm) Blade bolt 90 ft/lb (122 Nm) Standard ¼" fasteners 9 ft/lb (12 Nm) Standard 5 / 16 " fasteners 18 ft/lb (25 Nm) Standard 3 / 8 " fasteners 33 ft/lb (44 Nm) Standard 7 / 16 " fa ...
-
Dixon SPDZTR 30 BF - page 51
51 USA requirements Labels are placed on the engine and/or in the engine compartment stating that the machine will fulll the requir ements. This is also applicable to special requir ements for any of the states, (Califor nia emission rules etc.). Do not remove any of these l ...
-
Dixon SPDZTR 30 BF - page 52
52 ? ...
-
Dixon SPDZTR 30 BF - page 53
53 Action Date, mtr reading, stamp, sign Delivery service has been carried out. No remaining notes. Certied: Delivery Service Charge battery . r Adjust tire pr essure of all wheels according to T echnical Data. r Mount the steering controls in the normal position. r Connect the contact box to the ca ...
-
Dixon SPDZTR 30 BF - page 54
54 Action Date, mtr reading, stamp, sign 25-Hour Service Check the fuel pump’s air lter . r Check the hydraulic system’s oil level. r Check the tire pr essures. r Lubricate the belt adjuster , mower deck. r Lubricate the belt adjuster , hydraulic pumps. r Check/clean the engine’s cooling air i ...
-
Dixon SPDZTR 30 BF - page 55
55 Action Date, mtr reading, stamp, sign 50-Hour Service Perfor m the 25-hour service. r Clean/replace the air cleaner’s lter cartridge (paper lter) (shorter intervals for dusty operating conditions). r Change engine oil. r Lubricate according to lubrication chart. r Check/adjust the parking br ...
-
Dixon SPDZTR 30 BF - page 56
56 Action Date, mtr reading, stamp, sign 100-Hour Service Perfor m the 25-hour service. r Perfor m the 50-hour service. r Perfor m the 100-hour service. r Check/adjust the mower deck. r Clean the combustion chamber and grind the valve seats. r Check the engine valve clearance. r Replace the air cleaner ...
-
Dixon SPDZTR 30 BF - page 57
57 Action Date, mtr reading, stamp, sign ...
-
Dixon SPDZTR 30 BF - page 58
58 Action Date, mtr reading, stamp, sign ...
-
Dixon SPDZTR 30 BF - page 59
...
-
Dixon SPDZTR 30 BF - page 60
P/N 115 161527R2 09/25/09 ...
Do you have a question concerning Dixon SPDZTR 30 BF?
Use the form below
If you did not solve your problem by using a manual Dixon SPDZTR 30 BF, ask a question using the form below. If a user had a similar problem with Dixon SPDZTR 30 BF it is likely that he will want to share the way to solve it.