-
Quadra-Fire 7046-137C - page 1
R www .quadrare.com 7046-137C December 15, 2009 DO NOT DISCARD THIS MANUAL CAUTION • Important operating and maintenance instructions included. • Leave this manual with party responsible for use and operation. • Read, understand and follow these instructions for safe installation and operation. DO N OT DIS CAR D WAR NING If the inf orma ti ...
-
Quadra-Fire 7046-137C - page 2
Page 2 7046-137C December 15, 2009 R 2700-I ACC Wood Insert SAMPLE Serial Number Model Name T est Lab & Report Number Mfg Date Model: 2700-I ACC WOOD INSERT Report: #061-S-78-6.2 Made in U.S.A . U.S. ENVIRONMENT AL PROTECTION AGENCY - Certified to comply with July 1990 particulate emission standards. 2010 201 1 2012 Jan Feb Mar Apr May June Jul ...
-
Quadra-Fire 7046-137C - page 3
December 15, 2009 7046-137C Page 2700-I ACC Wood Insert R Congratulations ............................................................... 2 Sample of Safety/Serial Number Label ........................... 2 Warranty Policy ............................................................... 4-5 Section 1: Listing and Code Approvals A. Appliance Cert ...
-
Quadra-Fire 7046-137C - page 4
Page 4 7046-137C December 15, 2009 R 2700-I ACC Wood Insert W arranty Policy ...
-
Quadra-Fire 7046-137C - page 5
December 15, 2009 7046-137C Page 5 2700-I ACC Wood Insert R ...
-
Quadra-Fire 7046-137C - page 6
Page 6 7046-137C December 15, 2009 R 2700-I ACC Wood Insert 1 Listing and Code Approvals The Quadra-Fire 2700-I Wood Insert (ACC) meets the U.S. Environmental Protection Agency’s 1990 particulate emis - sion standards. A. Appliance Certication C. Glass Specications D. BTU & Efciency Specications This stove is equipped with 5mm cer ...
-
Quadra-Fire 7046-137C - page 7
December 15, 2009 7046-137C Page 7 2700-I ACC Wood Insert R 2 Operat ing Instruct ions W ARNING! DO NOT operate appliance before reading and understanding operating instructions. ...
-
Quadra-Fire 7046-137C - page 8
Page 8 7046-137C December 15, 2009 R 2700-I ACC Wood Insert B. Fire Safety T o provide reasonable re safety , the following should be given serious consideration: 1. Install at least one smoke detector on each oor of your home to ensure your safety . They should be located away from the heating appliance and close to the sleeping areas. Follo ...
-
Quadra-Fire 7046-137C - page 9
December 15, 2009 7046-137C Page 9 2700-I ACC Wood Insert R F . Burning Process In recent years there has been an increasing concern about air quality . Much of the blame for poor air quality has been placed on the burning of wood for home heating. In order to improve the situation, we at Qu adra-Fire have developed cleaner-burning wood appliances ...
-
Quadra-Fire 7046-137C - page 10
Page 10 7046-137C December 15, 2009 R 2700-I ACC Wood Insert H. Air Controls 1. Start-Up Air Control The function of the Start-Up Air Control is to activate the Automatic Combustion Control system (ACC). • Push the Start-Up Air Control all the way back until it stops and then pull forward to the front of the appliance until it stops. Figure 10.1. ...
-
Quadra-Fire 7046-137C - page 11
December 15, 2009 7046-137C Page 1 1 2700-I ACC Wood Insert R 3. Burn Rate Air Control • The air supply enters at the upper front of the rebox, near the top of the glass door . • This preheated air supplies the necessary fresh oxygen to mix with the unburned gases, helping to create the second, third and fourth combustion process. • This a ...
-
Quadra-Fire 7046-137C - page 12
Page 12 7046-137C December 15, 2009 R 2700-I ACC Wood Insert CORRECT POSITION INCORRECT POSITIONS Firebox damage due to improper bafe place - ment is not covered by warranty . Operate the wood burning appliance with the bafe in the correct position only . Not doing so could result in: • Reduced efciency • Overheating the chimney • Ov ...
-
Quadra-Fire 7046-137C - page 13
December 15, 2009 7046-137C Page 1 2700-I ACC Wood Insert R K. Building A Fire Before lighting your rst re in the appliance: 1. C o nr m t he ba f e a nd ce ra mi c b la nk et ar e c or re ct ly positioned. They should be even with the front tube and resting on all tubes. See page 12. 2. Remove all labels from glass. There are many w ...
-
Quadra-Fire 7046-137C - page 14
Page 14 7046-137C December 15, 2009 R 2700-I ACC Wood Insert L. Wood Fuel Moisture Seasoned Wood • Cut logs to size • Split to 6 inches (152 mm) or less in diameter • Air dry to a moisture content of not more than 20% - Soft wood - about nine months to dry - Hard wood - about eighteen months to dry Soft woods Hard woods • Douglas Fir • Oa ...
-
Quadra-Fire 7046-137C - page 15
December 15, 2009 7046-137C Page 15 2700-I ACC Wood Insert R N. Blower Operating Instructions 1. Initial (cold) startup: Open both controls fully by rais - ing the Burn Rate Air Control all the way up until it stops and PUSH the Start-up Air Control back until it stops. The blower tends to cool the appliance. Leave the blower off until the burn is ...
-
Quadra-Fire 7046-137C - page 16
Page 16 7046-137C December 15, 2009 R 2700-I ACC Wood Insert Q. Opacity (Smoke) Opacity is the measure of how cleanly your appliance is burning. Opacity is measured in percent: • 100% opacity is when an object is totally obscured by the smoke column from a chimney , and • 0% opacity means that no smoke column can be seen. As you beco me familia ...
-
Quadra-Fire 7046-137C - page 17
December 15, 2009 7046-137C Page 17 2700-I ACC Wood Insert R • Frequency: When ash is within 1-/4 inch (44mm) of firebox lip. Leave 1/4 to 1/2 inch (6-1mm) of ash in the bottom of the firebox. • By: Homeowner A. Disposal of Ashes • Place ashes in a metal container with a tight-tting lid. • Th e cl os ed c ont ai ne r sh oul d be pl ...
-
Quadra-Fire 7046-137C - page 18
Page 18 7046-137C December 15, 2009 R 2700-I ACC Wood Insert • Frequency: As desired • By: Homeowner • Clean glass with a non-abrasive glass cleaner . Abrasive cleaners may scratch and cause glass to crack. • If the deposits on the glass are not very heavy , normal glass cleaners work well. Heavier deposits may be removed by using a damp cl ...
-
Quadra-Fire 7046-137C - page 19
December 15, 2009 7046-137C Page 19 2700-I ACC Wood Insert R G. Quick Reference Maintenance Overview Guide for Wood Appliances. 2 2 Bafe and blanket placement is critical to heat out - put, efciency and overall life of the unit. Make sure the bafe is pushed all of the way to the back of the rebox and the blanket is laying at. Firebri ...
-
Quadra-Fire 7046-137C - page 20
Page 20 7046-137C December 15, 2009 R 2700-I ACC Wood Insert 4 T roubles hooting Guide With proper installation, operation, and maintenance your woodstove will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist you or a qualied service person in the diagnosis of a problem and the correct ...
-
Quadra-Fire 7046-137C - page 21
December 15, 2009 7046-137C Page 21 2700-I ACC Wood Insert R 5 Ser vice P ar ts Replacement A. Glass Replacement (Replace with 5mm ceramic glass only) 1 . Ensure that t he re is out and the appliance is co ol to the touch. 2. Protect a tabl e or c ounter top with pa dding or towels. Protect your hands and wear glov es to prevent injury . 3. Remo ...
-
Quadra-Fire 7046-137C - page 22
Page 22 7046-137C December 15, 2009 R 2700-I ACC Wood Insert C. Blower Replacement 1. Using a 5/2 Allen wrench, remove 4 blower housing mounting bolts and slide assembly out. Figure 22.1. 2. Disconnect the wires from the blower . . Using a Phillips head screw driver , remove 4 screws. Figure 22.2 . 4. Remove blower from the blower housing ass ...
-
Quadra-Fire 7046-137C - page 23
December 15, 2009 7046-137C Page 2 2700-I ACC Wood Insert R Figure 23.1 - Door Handle for Arched Door Locknut Door Cross Section (example) Latch Cam Spacing Wa shers Square Key Door Handle Spring Handle E. Bafe & Ceramic Blanket Removal 1. Remove all ash from the rebox, and extinguish all hot embers before disposal into a metal contain ...
-
Quadra-Fire 7046-137C - page 24
Page 24 7046-137C December 15, 2009 R 2700-I ACC Wood Insert F . T ube Channel Assembly Replacement Figure 24.3 Removing Tube Channel Assembly 1. Remove the bottom bricks rst and then remove the right side bricks. 2. Remove the bafe protection channel by bending back the tabs using needle nose pliers located at the right and left side ...
-
Quadra-Fire 7046-137C - page 25
December 15, 2009 7046-137C Page 25 2700-I ACC Wood Insert R 6 Getting Started Installer ’ s Guide A . Design and Installation Considerations Before installing, determine the following: • T ype of chimney connector to be used · single wall, 6 inch (152mm) diameter , stainless steel, or · double wall, 6 inch (152mm) diameter , stainless steel ...
-
Quadra-Fire 7046-137C - page 26
Page 26 7046-137C December 15, 2009 R 2700-I ACC Wood Insert C. Negative Pressure Negative pressure results from the imbalance of air available for the appliance to operate properly . It can be strongest in lower levels of the house. Causes include: • Exhaust fans (kitchen, bath, etc.) • Range hoods • Combustion air requirements for furnaces, ...
-
Quadra-Fire 7046-137C - page 27
December 15, 2009 7046-137C Page 27 2700-I ACC Wood Insert R Recommended Location Marginal Location Location Not Recommended Recommended Location Location NOT Recommended Multi-level Roofs Windward Leeward Outside T ermination Cap Figure 27.1 E. Chimney T ermination Requirements Follow manufacturer ’s instructions for clearance, securing ashin ...
-
Quadra-Fire 7046-137C - page 28
Page 28 7046-137C December 15, 2009 R 2700-I ACC Wood Insert 10 ft. (305cm) or more 3 ft. (91cm) Minimum Less than 10 ft. (305cm) 2 ft. (61cm)Minimum 3 ft. (91cm) Minimum W all or Parapet Flat Roof ft. ( 91cm) Mini mum Less than 10 f t. ( 05cm) 2 ft. (61cm) ft. (91cm) Mini mum 10 ft. (05cm) T o Nearest Roofl ine 2 ft. (61cm) Pitched R ...
-
Quadra-Fire 7046-137C - page 29
December 15, 2009 7046-137C Page 29 2700-I ACC Wood Insert R G. T ools And Supplies Needed H. Fire Safety T o provide reasonable re safety , the following should be given serious consideration: 1. Install at least one smoke detector on each oor of your home to ensure your safety . They should be located away from the heating appliance and clo ...
-
Quadra-Fire 7046-137C - page 30
Page 0 7046-137C December 15, 2009 R 2700-I ACC Wood Insert 7 Dimensions and Clearances A. Appliance Dimensions Figure 30.1 Top View Figure 30.2 Front View with Surround NOTE: Flue Collar size is 6 inch (152mm) diameter (ID) Figure 30.4 - Side View Without Optional Flue Adapter A B 16-1/4 in. (413mm) 9-15/16 in. (252mm) 29-1/16 in. (738mm) 12-1 ...
-
Quadra-Fire 7046-137C - page 31
December 15, 2009 7046-137C Page 1 2700-I ACC Wood Insert R B. Clearances to Combustibles, United States and Canada (UL and ULC) NOTE: Clearances may only be reduced by means approved by the regulatory authority having juris - diction Fire Risk. • Comply with all minimum clearances to combustibles as specied. • Failure to comply may cause ...
-
Quadra-Fire 7046-137C - page 32
Page 2 7046-137C December 15, 2009 R 2700-I ACC Wood Insert Thermal Protection Required Adj. Hearth Support 1/4 inch (6.35)mm), R value = 0.13 0 to 3-1/2 inch (0 to 89mm) CANADA ONL Y Hearth Height 0 to 3-1/2 inches (0 to 89mm) Full Reline Required 3-1/2 in. (89mm) Thermal Protection NOT Required Adj. Hearth Support Greater than 3-1/2 inch (89mm ...
-
Quadra-Fire 7046-137C - page 33
December 15, 2009 7046-137C Page 2700-I ACC Wood Insert R C. Calculating Alternate Floor Protection Material Thermal Conductivity: k value The k value indicates the amount of heat (in BTU’s) that will ow in 1 hour through 1 square foot of a uniform mate - rial 1 inch thick for each degree (F) of temperature differ - ence from one side o ...
-
Quadra-Fire 7046-137C - page 34
Page 4 7046-137C December 15, 2009 R 2700-I ACC Wood Insert 8 Chimney Systems D. Masonry Chimney • Must meet minimum standards of NFP A 21 1. • Must have at least 5/8 inch (16mm) reclay lining joined with refractory cement. (Installations into a clay ue wit hout a sta inless s teel line r may redu ce dr aw wh ich affe cts performance, ...
-
Quadra-Fire 7046-137C - page 35
December 15, 2009 7046-137C Page 5 2700-I ACC Wood Insert R UL 1777 Insulated Stainless Steel Liner or Other Approved Lining System Follow Manufacturer ’s Instructions on Insulation and Support For Zero or Other Non-Code Clearances, Follow Approved Liner Manufacturer ’s Specific Insulation Requirements: Different Clearances May Require Diffe ...
-
Quadra-Fire 7046-137C - page 36
Page 6 7046-137C December 15, 2009 R 2700-I ACC Wood Insert F . Prefabricated Metal Chimney Figure 36.1 E. Metal Heat Circulating Masonry Th e chi mne y ca n be new or exi st ing, mas on ry o r pre fabr ica ted and must meet the following minimum requirements: • Must be minimum 6 inch (152mm) inside diameter of high temperature chimney listed ...
-
Quadra-Fire 7046-137C - page 37
December 15, 2009 7046-137C Page 7 2700-I ACC Wood Insert R Minimum Width of Cavity Opening - Front 2-1/2 775 Minimum Width of Cavity Opening - Rear 20 508 Minimum Height 18-1 1/16 475 Minimum Depth from Front to Rear 17-1/4 438 Inches Millimeters The following modications of factory-built replaces are permissible: • The replace mu ...
-
Quadra-Fire 7046-137C - page 38
Page 8 7046-137C December 15, 2009 R 2700-I ACC Wood Insert Ovalizing round stainless steel liners to accommodate the liner passing through the damper region of a replace is an allowable and acceptable practice. Ensure that the ovalization is minimized to the extent required to t through the damper . J. Ovalizing Round Stainless Steel Line ...
-
Quadra-Fire 7046-137C - page 39
December 15, 2009 7046-137C Page 9 2700-I ACC Wood Insert R A. Outside Air Kit Installation Items Needed for Installation (not supplied) • 4 inch ex aluminum pipe, or if using alternate material, then it shall be made from durable, non-combustible, heat resistant material up to 50 o F . Cut the pipe to the required length for your instal ...
-
Quadra-Fire 7046-137C - page 40
Page 40 7046-137C December 15, 2009 R 2700-I ACC Wood Insert C. Securing Stove Pipe/Liner to Flue Collar 1. There are 4 pre-drilled holes in the ue collar 90 degrees apart. Attach the ue collar to the stove pipe/liner . If the seal is questionable use stove mastic Figure 40.2. 2. Attach gasket to bottom side of ue collar with a thin coat o ...
-
Quadra-Fire 7046-137C - page 41
December 15, 2009 7046-137C Page 41 2700-I ACC Wood Insert R F . Surround & T rim Kit Installation 1. Lay surround face down on a protected surface to pre - vent scratching. 2. Using a Phillips head screw driver attach the side sur - rounds to the top surround using (2) #8 sheet metal screws on each side provided with the kit. Figure 41.2 . ...
-
Quadra-Fire 7046-137C - page 42
Page 42 7046-137C December 15, 2009 R 2700-I ACC Wood Insert Surround & T rim Kit Installation (Cont’d) 6. Align the 2 screws in the top surround piece to the 2 align - ment holes on the appliance top. Figure 42.2. 7. Align the surround slots to the lower pins on the appli - ance, one on each side. Figure 42.3 Alignment Hole in Appliance T op ...
-
Quadra-Fire 7046-137C - page 43
December 15, 2009 7046-137C Page 4 2700-I ACC Wood Insert R Figure 43.1 Figure 43.2 Figure 43.3 Figure 43.4 Figure 43.5 - Installed on Left Side H. Blower Cord Installation on Left Side The blower cord is shipped to be installed on the right side of the appliance. Y ou may relocate the cord so it is on the left side. Y ou remove the blower contr ...
-
Quadra-Fire 7046-137C - page 44
Page 44 7046-137C December 15, 2009 R 2700-I ACC Wood Insert Part No. ADJSPT -3, size 3-1/2” x 48-1/2” DOUBLE-SIDE D T APE DOUBLE-SIDE D T APE SCREWS ARE CIRCLED EXPLODED VIEW OF SCISSORS Figure 44.1 EXP AND SCISSORS T O DESIRED HEIGHT CUT TOP EDGE OF TRIM, NOT BOTTOM EDGE INST ALL FRONT TRIM LAST . CORNERS OVERLAP SIDE TRIM PIECES I. Zero Clea ...
-
Quadra-Fire 7046-137C - page 45
December 15, 2009 7046-137C Page 45 2700-I ACC Wood Insert R 10 . Burn wood only . Other types of fuels may generate poisonous gases (e.g., carbon monoxide). 1 1. If unit burns poorly while an exhaust blower is on in home, (i.e., range hood), increase combustion air . 12. Inst alla tion sh all be in ac cor dan ce wit h the Ma nufa ctur ers Home &am ...
-
Quadra-Fire 7046-137C - page 46
Page 46 7046-137C December 15, 2009 R 2700-I ACC Wood Insert A. Exploded Drawings 1 1 Reference Materials 1 2 3 4 5 6 7 8 9 10 18 25 36 35 37 38 39 40 41 42 43 44 45 SEE FIG. D SEE FIG. C SEE FIG. B SEE FIG. A Figure 46.1 7025-041 12-7-09 ...
-
Quadra-Fire 7046-137C - page 47
December 15, 2009 7046-137C Page 47 2700-I ACC Wood Insert R 3 3 7-3/4” 4-1/2” 8-5/8” 2 2 2 3 4-1/2” 7-3/8” 6-1/2” 4-1/2” 8-1/8” 7-1/4” 4 4 4 1 1 1 1 1 1 1 1 1 1 1 # 6 BRICK-7046-005 Brick Set Assembly # 18 DR-27RCT Door Rectangle # 25 DR-27BK, Door Assembly , Black DR-27GD, Door Assembly , Gold T rim DR-27NL, Door Assembly , Nick ...
-
Quadra-Fire 7046-137C - page 48
Page 48 7046-137C December 15, 2009 R 2700-I ACC Wood Insert B. Service Parts & Accessories ...
-
Quadra-Fire 7046-137C - page 49
December 15, 2009 7046-137C Page 49 2700-I ACC Wood Insert R ? ...
-
Quadra-Fire 7046-137C - page 50
Page 50 7046-137C December 15, 2009 R 2700-I ACC Wood Insert ? ...
-
Quadra-Fire 7046-137C - page 51
December 15, 2009 7046-137C Page 51 2700-I ACC Wood Insert R Date of Service Performed By Description of Service C. Service And Maintenance Log ...
-
Quadra-Fire 7046-137C - page 52
7046-137C December 15, 2009 Page 52 R Hearth & Home T echnologies 1445 North Highway Colville, W A 991 14 Division of HNI INDUSTRIES CONT ACT INFORMA TION : Please contact your Quadra-Fire dealer with any questions or concerns. For the number of your nearest Quadra-Fire dealer , log onto www .quadrare.com This product may be covered by one o ...
Do you have a question concerning Quadra-Fire 7046-137C?
Use the form below
If you did not solve your problem by using a manual Quadra-Fire 7046-137C, ask a question using the form below. If a user had a similar problem with Quadra-Fire 7046-137C it is likely that he will want to share the way to solve it.