English dropdown-ico

Manual Bush Hog RDTH 84

20 pages 1.55 mb
Download

Go to site of 20

Summary
  • Bush Hog RDTH 84 - page 1

    OPERATION l l MAINTENANCE 1107 $4.00 50038342 R D T H 8 4 R e a r D i s c h a r g e T u rf H o g O p e r a t o r ’ s M a n u a l B U S H H O G ® ...

  • Bush Hog RDTH 84 - page 2

    CONGRA TULA TIONS! Y ou have invested in the best implement of its type on the market today . The care you give your Bush Hog implement will greatly determine your satisfaction with its performance and its service life. We urge a careful study of this manual to provide you with a thorough understanding of your new implement before operating, as wel ...

  • Bush Hog RDTH 84 - page 3

    RDTH 84 Operator ’ s Manual T ABLE OF CONTENTS SECTION/P ARA P AGE W arranty ....................................................2 Dealer Preparation Check List ..................3 Safety Signs ..............................................4 Safety Precautions ....................................5 Federal Laws and Regulations ..................6 ...

  • Bush Hog RDTH 84 - page 4

    LIMITED WARRANTY OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an author-ized Bush Hog dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year for non-commercial, state, and municipalities’ use and ninety (90) days for comm ...

  • Bush Hog RDTH 84 - page 5

    DEALER PREP ARA TION CHECK LIST RDTH ROT AR Y CUTTER BEFORE DELIVERING MACHINE — The following check list should be completed. Use the Operator ’s Manual as a guide. ❒ 1. Assembled completed. ❒ 2. Gearbox filled with oil. ❒ 3. All fittings lubricated. ❒ 4. All shields in place and in good condition. ❒ 5. All fasteners torqued to speci ...

  • Bush Hog RDTH 84 - page 6

    Safety Alert Symbol This Safety Alert Symbol means: “ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!” This symbol is used to call attention to safety precautions that should be followed by the operator to avoid accidents. When you see this symbol, carefully read the message that follows and heed its advice. Failure to comply with safe- ty pre ...

  • Bush Hog RDTH 84 - page 7

    IMPORT ANT SAFETY PRECAUTIONS This symbol is used to call attention to safe- ty precautions that should be followed by the operator to avoid accidents. When you see this symbol, carefully read the message that follows and heed its advice. Failure to comply with safety precautions could result in serious bodily injury. In addition to the design and ...

  • Bush Hog RDTH 84 - page 8

    IMPORT ANT FEDERAL LA WS AND REGULA TIONS* CONCERNING EMPLOYERS, EMPLOYEES AND OPERA TIONS. *(This section is intended to explain in broad terms the concept and effect of the following federal laws and regulations. It is not intended as a legal interpretation of the laws and should not be considered as such). U.S. Public Law 91-596 (The Williams-St ...

  • Bush Hog RDTH 84 - page 9

    1-1 INTRODUCTION We are pleased to have you as a Bush Hog cus- tomer. Your RDTH Series Rotary Cutter has been carefully designed to give maximum service with minimum down time.This manual is provided to give you the necessary operating and maintenance instructions for keeping your rotary cutter in top operating condition. Please read this manual th ...

  • Bush Hog RDTH 84 - page 10

    2-1 A TT ACHING TO TRACT OR A. Attach to tractor Cat. I three point hitch as described in tractor operator’s manual. B. Raise and lower cutter to determine position with shortest distance between the tractor PTO shaft and gearbox input shaft. Shut down tractor leaving cutter in position of shortest distance. SECURELY BLOCK CUTTER IN POSITION. C. ...

  • Bush Hog RDTH 84 - page 11

    G. Clamp end of driveline in a vice. Cut off shield where marked. (Figure 2-3). Figure 2-3 H. Using cut off section of shield as a guide, cut shaft the same amount. (Figure 2-4) I. Repeat steps “G” and “H” to other driveline sec- tion. J. Deburr ends of driveline sections and clean away all chips and filings. (Figure 2-5) K. Apply multi-pur ...

  • Bush Hog RDTH 84 - page 12

    SECTION III OPERA TING INSTRUCTIONS 3-1 GENERAL SAFETY Only qualified people familiar with this operator’s manual and tractor operator’s manual should oper- ate this machine. Operator should wear hard hat, safety glasses and safety shoes. The operator should read, understand and practice all safety mes- sages shown on the caution, warning and d ...

  • Bush Hog RDTH 84 - page 13

    SECTION IV MAINTENANCE 4-1 MAINTENANCE CHECK LIST Perform scheduled maintenance as outlined below. Lower implement to ground, turn off tractor, and set parking brake before doing maintenance inspections or work. Some checks may require raising machine off ground and supporting with blocks. All bolts should be torqued as indicated in torque chart un ...

  • Bush Hog RDTH 84 - page 14

    Belt tension should be checked every 40 hours to get maximum life from drive belt and best perfor- mance from cutter. Belt tension is adjusted by increasing or decreasing the length of the spring on the moveable idler. For proper belt tension the spring length should be set at 2-7/8”. (Figure 4-2). To adjust the spring length, loosen or tighten t ...

  • Bush Hog RDTH 84 - page 15

    4-6 TROUBLESHOOTING Troubleshooting procedures are listed in Table 4-1 below. If the problem cannot be solved or replacement parts are necessary, contact your authorized Bush Hog dealer. Please have ready your machine name, model number, serial number, purchase date and exact cause or description of problem. Table 4-1 Troubleshooting PROBLEM PROBAB ...

  • Bush Hog RDTH 84 - page 16

    THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING MACHINE ASSEMBLY. 1. Wear personal protective equipment such as, but not limited to, protection for eyes, ears, feet, hands, lungs and head when assembling the equip- ment. Do not wear loose clothing or jewelry that may catch on equipment moving parts. 2. Do not lift ...

  • Bush Hog RDTH 84 - page 17

    E. Fasten mast supports and upper flex link to mast halves using 5/8” x 5-1/2” bolt, pivot tube, lock- washer and locknut. F. Place two 1” spacers on the caster stems and insert into caster arms. Place two 1” spacers and one 1/2” spacers on the caster stem above the cast- er arms. This arrangement will give a cutting height of approximate ...

  • Bush Hog RDTH 84 - page 18

    SAFETY DECALS To promote safe operation, Bush Hog supplies safety decals on all products manufactured. Because damage can occur to safety decals either through shipment, use or reconditioning, Bush Hog will, upon request, provide safety decals for any of our products in the field at no charge. Contact your authorized Bush Hog dealer for more inform ...

  • Bush Hog RDTH 84 - page 19

    T ORQUE SPECIFICA TIONS Proper toque for American fasteners used on Bush Hog equipment. Recommended Torque in Foot Pounds (Newton Meters).* BOLT DIAMETER WRENCH (IN.) “B” AND SAE SAE SAE SIZE (IN.) “A” THREAD SIZE GRADE 2 GRADE 5 GRADE 8 7/16 1/4 - 2O UNC 6 (7) 8 (11) 12 (16) 7/16 1/4 - 28 UNF 6 (8) 10 (13) 14 (18) 1/2 5/16 - 18 UNC 11 (15) ...

  • Bush Hog RDTH 84 - page 20

    P.O. Box 1039 l l Selma, AL 36702-1039 Telephone (334) 874-2700 l l www.bushhog.com ...

Manufacturer Bush Hog Category Fish Finder

Documents that we receive from a manufacturer of a Bush Hog RDTH 84 can be divided into several groups. They are, among others:
- Bush Hog technical drawings
- RDTH 84 manuals
- Bush Hog product data sheets
- information booklets
- or energy labels Bush Hog RDTH 84
All of them are important, but the most important information from the point of view of use of the device are in the user manual Bush Hog RDTH 84.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Bush Hog RDTH 84, service manual, brief instructions and user manuals Bush Hog RDTH 84. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Bush Hog RDTH 84.

Similar manuals

A complete manual for the device Bush Hog RDTH 84, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Bush Hog RDTH 84 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Bush Hog RDTH 84.

A complete Bush Hog manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Bush Hog RDTH 84 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Bush Hog RDTH 84, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Bush Hog RDTH 84, that we can find in the current document
3. Tips how to use the basic functions of the device Bush Hog RDTH 84 - which should help us in our first steps of using Bush Hog RDTH 84
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Bush Hog RDTH 84
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Bush Hog RDTH 84 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Bush Hog RDTH 84?

Use the form below

If you did not solve your problem by using a manual Bush Hog RDTH 84, ask a question using the form below. If a user had a similar problem with Bush Hog RDTH 84 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)