English dropdown-ico

Manual Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER

13 pages 0.05 mb
Download

Go to site of 13

Summary
  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 1

    MANLEY LABORATORIES, INC. OWNER'S MANUAL MANLEY REFERENCE 500 / 200 W ATT MONOBLOCK MANLEY LABORATORIES, INC. 13880 MAGNOLIA AVE. CHINO, CA. 91710 USA TEL: (909) 627-4256 FAX: (909) 628-2482 email: emanley@netcom.com ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 2

    CONTENTS INTRODUCTION 3 MAINS CONNECTIONS 4 CONNECTING YOUR AMPLIFIER 5 DIAGRAM TOP VIEW 6 DIAGRAM REAR VIEW 7 DIAGRAM FRONT VIEW 8 BIAS PROCEDURES 9 OPERATIONAL NOTES 10 SPECIFICATIONS 11 WARRANTY 12 WARRANTY REGISTRATION 13 SECTION PAGE ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 3

    INTRODUCTION THANK YOU!... for choosing the Manley 500/200 Monoblock Amplifiers. Designed by David Manley, the Manley 500/ 200 Monoblock Amplifiers use only the best available components, with the shortest and cleanest signal path possible, and with the use of our own in-house CNC machine shop we can provide you with a amplifier that looks as good ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 4

    MAINS CONNECTIONS ! W ARNING! TO PREVENT THE RISK OF ELECTRIC SHOCK DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONEL GENERAL NOTES LOCATION & VENTILATION The Manley 440/200 Monoblock Amplifiers must be installed in a stable location with ample ventilation. Allow a minimum of 2 inches of clearance on the top and sides of the amplifi ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 5

    CONNECTING YOUR AMPLIFIER Setting up your amplifiers is rather easy. 1. Connect all source components (turntable, CD, Tuner, Tape DAT, etc.) to your preamplifier. 2. If using an UNBALANCED output from your preamplifier, connect the RCA interconnects from the output of the preamplifier or switching center to the RCA input on the back of the amplifie ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 6

    Amplifier Overhead View Tube Location OUTPUT TUBES:10 x RUSSIAN 6550 The 6550's used are the Russian Svetlana 6550's. This has been proven to be the rugged and reliable of this type and we strongly emphasize that only the RUSSIAN 6550's should be used in this amplifier. The MANLEY 440/200 WATT MONOBLOCK has been thoroughly optimised ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 7

    SPEAKER OUTPUT BINDING POSTS XLR BALANCED INPUT UNBALANCED BALANCED UNBALANCED BALANCED SELECT RCA UNBALANCED INPUT B+ FUSE SLO-BLO MAINS FUSE SLO-BLO MAINS IN IEC REAR VIEW ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 8

    FRONT VIEW OF AMPLIFIER WITH BIAS COVER PLATE REMOVED SHOWING BIAS ADJUST POTS READ BIAS FEEDBAC K SLOP E MINIMU M STANDAR D MAXIMU M MAINS POWER ON / OFF SWITCH OPERATE STANDBY EVER-WARM SOFT START SWITCH TRIODE TETRODE SWITCH POWER LED STANDBY LED (BLINKING) TRIODE TETRODE MANLEY DESIGNERS' REFERENCE SERIES 500 / 200 WATT MONOBLOCK DESIGNED ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 9

    BIAS PROCEDURES The Manley 500/200 Monoblock Amplifiers uses a fixed bias system that requires very little attention. We recommend checking the bias every 2-3 months or any time you replace an output tube. To adjust or check the bias, follow the following steps. For this procedure you will need a voltmeter (a hand held autoranging DMM digital multi ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 10

    OPERATIONAL NOTES SWITCHING ON -- SOFT START The MANLEY 500/200 is equipped with a SOFT-START circuit which lessens the initial stress the amplifier takes upon turn-on. We recommend that you use this soft start facility whenever you turn the amplifier on and especially when cold. 1. Ensure that the "mains" switch on the front panel is in ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 11

    SPECIFICA TIONS Vacuum Tubes: 10 x 6550 (Output), 2 x 6414 (Drivers), 1 x 12AT7 (Input) Output Power TETRODE: 500Watts (@1.5% THD 5 ohm load) TRIODE: 250 Watts (@1.5% THD 5 ohm load) Frequency Response, +/- .5 dB 10 Hz - 80 KHz Input Sensitivity 1V Input Impedance 100 KOhm Load Impedance 5 Ohm (fixed) S/N Ratio @440W -80 dB Power Consumption 30 Wat ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 12

    W ARRANTY All Manley Laboratories equipment is covered by a limited warranty against defects in materials and workmanship for a period of 90 days from date of purchase to the original purchaser only. A further optional limited 5 year warranty is available to the original purchaser upon proper registration of ownership within 30 days of date of firs ...

  • Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - page 13

    WARRANTY REGISTRATION We ask that you please fill out this registration form and send the bottom half to: MANLEY LABORATORIES REGISTRATION DEPARTMENT 13880 MAGNOLIA AVE. CHINO CA, 91710 Registration entitles you to product support, full warranty benefits, and notice of product enhancements and upgrades. You MUST complete and return the following to ...

Manufacturer Manley Labs Category Stereo Amplifier

Documents that we receive from a manufacturer of a Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER can be divided into several groups. They are, among others:
- Manley Labs technical drawings
- 500 / 200 WATT MONOBLOCK AMPLIFIER manuals
- Manley Labs product data sheets
- information booklets
- or energy labels Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER
All of them are important, but the most important information from the point of view of use of the device are in the user manual Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER, service manual, brief instructions and user manuals Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER.

Similar manuals

A complete manual for the device Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER.

A complete Manley Labs manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER, that we can find in the current document
3. Tips how to use the basic functions of the device Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - which should help us in our first steps of using Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER?

Use the form below

If you did not solve your problem by using a manual Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER, ask a question using the form below. If a user had a similar problem with Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)