Manual Diamond Audio Technology D6 1000.2

12 pages 3.63 mb
Download

Go to site of 12

Summary
  • Diamond Audio Technology D6 1000.2 - page 1

    D6 450.2 | D6 700.4 | D6 1000.2 | D6 1200.1 AMPLIFIER INST ALL A TION MANUAL ...

  • Diamond Audio Technology D6 1000.2 - page 2

    2 Congratulations! Thank you for choosing a Diamond Audio T echnologies D6 Series amplier . We sincerely believe that D6 ampliers hav e the very be st per formance and value. DA T pr oducts are engineered and produced with the highest quality materials and incorporate the latest technology. We think you will nd your new DA T amplier mee ...

  • Diamond Audio Technology D6 1000.2 - page 3

     Fr equency Response: 20Hz to 20KHz +/-3 dB Signal to Noise Ratio: > 95dBA (20 to 20kHz) Channel Separation 50dB THD+N(T otal Harmonic Distortion + Noise) < 0.2%(Output-1W 4 Ohms) RC A Input Sensitivity: 150mV to 4V RCA Input Impedance: > 20K Ohms Hi-Le vel Input Sensitivity: 1.5V to 14V Hi-Level Input Impedance: 32 Ohms Min to Max V ol ...

  • Diamond Audio Technology D6 1000.2 - page 4

    4 D6 Amplifiers 245 x 74mm D6 700.4 D6 1000.2 D6 1200.1 D6 2000.1 D6 450.2 25A 25A 25A 25A 25A 25A 30A 30A 30A 30A 30A 30A 30A HP LP FR F FLAT LF RF L R RR LR L R L R LOW HIGH GAIN MIN MAX BASS BOOST 0dB +18dB HPF 30Hz 500Hz LPF 30Hz 500Hz SUB SONIC 10Hz 100Hz LPF 30Hz 500Hz SUB SONIC 10Hz 100Hz LPF 30Hz 500Hz SUB SONIC 10Hz 100Hz FRONT REAR INPUT ...

  • Diamond Audio Technology D6 1000.2 - page 5

    5 RCA Input and Pass-Thru Output - These RCA jacks allow for a normal Left and Right channel signal input. Simply connect to the source unit using RCA type audio cables, keeping them away from power wiring wher ever pos sible. On the 4 channel amplifiers (D6 700.4) “Fron t” and “Rear” input jacks ar e pr esent. The“Pass-Thru” output al ...

  • Diamond Audio Technology D6 1000.2 - page 6

    6 Installation Guidelines T ools and Supplies Listed bel ow are the tools and supplies needed to c omplete this installation: • V olt/Ohm Meter • Wir e strippers and wire cutter s • #2 Phillips scr ewdriver • Battery post wr ench • Hand held drill w/assorted bits • High quality electric al tape or heatshrink tubing • Soldering ir on a ...

  • Diamond Audio Technology D6 1000.2 - page 7

    7 Mounting Locations Engine Compartment Never mount this unit in the engine c ompartment. Mounting the unit in the engine compartment will void your warranty . T runk Mounting Mounting the amplier v ertically will provide adequate cooling of the amplier . If you will be mounting it t o an existing panel, be sur e it’ s not pr one t o e xces ...

  • Diamond Audio Technology D6 1000.2 - page 8

    8 3) T rim the power cabl e within 18 inches (45.7mm) of the positive battery post and splice in a in-line fuse holder . DO NOT install the fuse at this time. 4) Strip 1/2 inch (12.7mm) fr om the battery end of the power cable and crimp a large ring terminal to the cabl e. Connect the ring terminal to the positive (+) battery post. 5) Prepa r e the ...

  • Diamond Audio Technology D6 1000.2 - page 9

    9 Connecting Multiple Speak ers If you must connect mor e than one speak er per channel, ther e are two methods in which to do so: Series or Parallel. Par allel connections are har der on the amplier than series connections, as the total impedance is l ower compar ed to driving a single speaker, and the amplier must produce mor e current to d ...

  • Diamond Audio Technology D6 1000.2 - page 10

    10 Installing the Remote Le vel Controll er The D6 1200.1 c omes packaged with a r emote lev el contr ol. This allows y ou to co ntr ol the lev el by attenu- ating the amplitude or incre asing (up to the maxi mum set-p oint) of the ampl ier’ s inp ut gain contr ol. This contr ol does not add additional bass boost, it simpl y allows y ou to con ...

  • Diamond Audio Technology D6 1000.2 - page 11

    11 Adjustment of Built-In Crosso ver (All Models) Placing the switch in the HP position sets the amplier to the High P ass mode, enabling frequencies above the cutoff point t o pass. Placing the switch in the LP position sets the amplier to the Low Pass mode, enabling frequencies below the cut off point to pass. Placing the switch in the OFF ...

  • Diamond Audio Technology D6 1000.2 - page 12

    041807 Diamond Audio W arranty Diamond Audi o T echno logi es, LL C (DA T) warr ants this product to be fr ee fr om defects in mate- rial and workmanship for a period of one (1) year fr om the original date of pur chase pr ovided it was pur chased fr om an authorized DA T r etailer within the United States. However, if this pr oduct was install ed ...

Manufacturer Diamond Audio Technology Category Stereo Amplifier

Documents that we receive from a manufacturer of a Diamond Audio Technology D6 1000.2 can be divided into several groups. They are, among others:
- Diamond Audio Technology technical drawings
- D6 1000.2 manuals
- Diamond Audio Technology product data sheets
- information booklets
- or energy labels Diamond Audio Technology D6 1000.2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Diamond Audio Technology D6 1000.2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Diamond Audio Technology D6 1000.2, service manual, brief instructions and user manuals Diamond Audio Technology D6 1000.2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Diamond Audio Technology D6 1000.2.

A complete manual for the device Diamond Audio Technology D6 1000.2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Diamond Audio Technology D6 1000.2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Diamond Audio Technology D6 1000.2.

A complete Diamond Audio Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Diamond Audio Technology D6 1000.2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Diamond Audio Technology D6 1000.2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Diamond Audio Technology D6 1000.2, that we can find in the current document
3. Tips how to use the basic functions of the device Diamond Audio Technology D6 1000.2 - which should help us in our first steps of using Diamond Audio Technology D6 1000.2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Diamond Audio Technology D6 1000.2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Diamond Audio Technology D6 1000.2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Diamond Audio Technology D6 1000.2?

Use the form below

If you did not solve your problem by using a manual Diamond Audio Technology D6 1000.2, ask a question using the form below. If a user had a similar problem with Diamond Audio Technology D6 1000.2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)