Manual Pitco L20-293

20 pages 0.66 mb
Download

Go to site of 20

Summary
  • Pitco L20-293 - page 1

    Installation & Operation Manual L20-293, rev. 0 (1/06) IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment: Model #: _____________________________ Serial #: _____________________________ Date Purchased: ______________________ ENGLISH PE14D: Floor Model Electric Pasta Cooker RS14D: ...

  • Pitco L20-293 - page 2

    TO THE PURCHASER, OWNER AND STORE MANAGER Please review these warnings prior to posting them in a prominent location for reference. ii L20-293, rev. 0 (1/06) WARNING DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WARNING Improper installation, alteration, service or maintenance can ...

  • Pitco L20-293 - page 3

    PE14D: Floor Model Electric Pasta Cooker TABLE OF CONTENTS iii 1. INSTALLATION ......................................................................................... 1 1.1. CHECKING YOUR NEW APPLIANCE ................................................................................... 1 1.2. INSTALLATION CLEARANCES ............................... ...

  • Pitco L20-293 - page 4

    TABLE OF CONTENTS iv L20-293, rev. 0 (1/06) 3.1.3. CLEANING THE CABINET ............................................................................................ 11 3.2. MONTHLY PREVENTATIVE MA INTENANCE ...................................................................... 12 3.2.1. DELIMING ..................................................... ...

  • Pitco L20-293 - page 5

    PE14D: Floor Model Electric Pasta Cooker INSTALLATION 1 1. INSTALLATION 1.1. CHECKING YOUR NEW APPLIANCE Your new Pitco appliance has been carefully packed into one crate. Every effort has been made to ensure that it is delivered to you in perfect condition. As you unpack your new appliance, inspect each of the pieces for damage. If something is da ...

  • Pitco L20-293 - page 6

    INSTALLATION 2 L20-293, rev. 0 (1/06) 1.2. INSTALLATION CLEARANCES The clearances shown below are for combustible and non-combustible installations and will allow for safe and proper operation of your appliance. In addition to the above clearances there must also be at least 16 inches (40.64cm) of aisle space in front of the unit. 1.3. LEG/CASTER I ...

  • Pitco L20-293 - page 7

    PE14D: Floor Model Electric Pasta Cooker INSTALLATION 3 1.4. PLUMBING CONNECTIONS The plumbing installation should be done by a licensed plumber and must comply with local and national codes. 1.4.1. WATER INLET CONNECTIONS If a faucet or water fill option is equipped on your appliance connections to a potable water supply will be required. If a sin ...

  • Pitco L20-293 - page 8

    INSTALLATION 4 L20-293, rev. 0 (1/06) 1) 1” (2.54cm) Access Hole 2) Connection Points 1/2” (1.27cm) Allen Wrench Required 3) Ground Connection Flat head screwdriver required 1.6. VENTILATION AND FIRE SAFETY SYSTEMS Your new appliance must have proper ventilation to function safely and properly. It is very important to install a fire safety syst ...

  • Pitco L20-293 - page 9

    PE14D: Floor Model Electric Pasta Cooker INSTALLATION 5 1) Probe 2) High Temperature Limit ( may be either style) 3) Heating Element 1.7. INSPECTION Before you begin filling and operating the appliance, perform the following visual checks: ü After the appliance is in its permanent location, check the levelness. Any additional leveling that is nece ...

  • Pitco L20-293 - page 10

    OPERATION 6 L20-293, rev. 0 (1/06) 2. OPERATION An operator’s manual for your appliance’s specific control type should be included with this manual. Refer to that manual prior to operating this appliance. 2.1. OPERATIONAL FEATURES The diagram below outlines some of the key operational components of your appliance. Refer to the following section ...

  • Pitco L20-293 - page 11

    PE14D: Floor Model Electric Pasta Cooker OPERATION 7 1. Cook Tank 2. Controller (Not on all Models) Controls the water temperature inside the cook tank. Optional timers are located on the controller (if equipped). Includes button to switch between boil mode and simmer mode (not on all models). If the controller has an ON/OFF button, it will be used ...

  • Pitco L20-293 - page 12

    OPERATION 8 L20-293, rev. 0 (1/06) Tank Capacity Model Capacity PE14D 12 Gal. (45.5 Liters) 2.2. FILLING THE APPLIANCE 2.2.1. FILLING THE COOKER TANK It is recommended that the cooker tank is filled with hot water. This will greatly decrease the time it takes for the appliance to reach operating temperature. Refer to the following procedure to fill ...

  • Pitco L20-293 - page 13

    PE14D: Floor Model Electric Pasta Cooker OPERATION 9 2.3. APPLIANCE START UP Refer to the following procedure to start the appliance prior to operation. 1. Ensure that the drain valve is closed. 2. Fill the cook tank with water. (See section 2.1 “Filling the Appliance”) 3. If the appliance is equipped with a I/0 (ON/OFF) switch, turn it to the ...

  • Pitco L20-293 - page 14

    OPERATION 10 L20-293, rev. 0 (1/06) Typical Timer Buttons* Cooked Pasta Volumes 1lb. Dry = Pasta Type Cooked Spaghetti 10 cups Angel Hair 8 cups Fettuccine 7 cups Ziti 9 cups Shells 8 cups Bow Ties 10 cups This table is for reference only. Please refer to the pasta manufacturer’s specifications to determine exact cooked quantity. 2.4.2. BOIL MODE ...

  • Pitco L20-293 - page 15

    PE14D: Floor Model Electric Pasta Cooker PREVEN TATIVE MAINTENANCE 11 WARNING Read the operation section of this manual prior to filling or operating the appliance. 3. PREVENTATIVE MAINTENANCE 3.1. DAILY PREVENTATIVE MAINTENANCE Performing the preventative maintenance steps below on a daily basis will keep your equipment safe and at peak performanc ...

  • Pitco L20-293 - page 16

    PREVENTATIVE MAINTENANCE 12 L20-293, rev. 0 (1/06) WARNING The power supply must be disconnected before cleaning and servicing this appliance! 3.2. MONTHLY PREVENTATIVE MAINTENANCE Water can leave mineral deposits inside the tank. Performing the monthly preventative maintenance steps below will keep your equipment safe and at peak performance. If y ...

  • Pitco L20-293 - page 17

    PE14D: Floor Model Electric Pasta Cooker PREVEN TATIVE MAINTENANCE 13 3.3.4. CONTROL BOX & ELECTRICAL COMPONENTS ü Verify that heating contactors are in good condition. Check for worn or pitted contacts. Verify that wires are tight and in good condition. ü Verify that all components (transformer, terminal block, relays, drain switches, etc… ...

  • Pitco L20-293 - page 18

    TROUBLESHOOTING 14 L20-293, rev. 0 (1/06) High Temperature Reset Button (Not on all models) 4. TROUBLESHOOTING 4.1. POWER FAILURE If electric power is removed for any reason, the appliance will shut down To restart the appliance, follow the appliance start up procedure in section 2.2. 4.2. HIGH TEMPERATURE LIMIT This appliance is equipped with a hi ...

  • Pitco L20-293 - page 19

    PE14D: Floor Model Electric Pasta Cooker TROUBLESHOOTING 15 4.4. TROUBLESHOOTING CHART 4.5. CONTROLLER WARNING DISPLAYS If your appliance is equipped with a temperature controller it may display the following warnings on its display. Problem Probable Causes Corrective Actions No power to appliance. Check main building power supply. Circuit Breaker ...

  • Pitco L20-293 - page 20

    L20-293, rev. 0 (1/06) In the event of problems with or questions about your order, please contact the Pitco Frialator fac tory at: (800) 258-3708 US and Canada only or (603) 225-6684 World Wide Website Address: www.pitco.com In the event of problems with or questions about your equipment, please contact the Pitco Frialator Authorized Service and P ...

Manufacturer Pitco Category Pasta Maker

Documents that we receive from a manufacturer of a Pitco L20-293 can be divided into several groups. They are, among others:
- Pitco technical drawings
- L20-293 manuals
- Pitco product data sheets
- information booklets
- or energy labels Pitco L20-293
All of them are important, but the most important information from the point of view of use of the device are in the user manual Pitco L20-293.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Pitco L20-293, service manual, brief instructions and user manuals Pitco L20-293. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Pitco L20-293.

Similar manuals

A complete manual for the device Pitco L20-293, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Pitco L20-293 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Pitco L20-293.

A complete Pitco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Pitco L20-293 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Pitco L20-293, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Pitco L20-293, that we can find in the current document
3. Tips how to use the basic functions of the device Pitco L20-293 - which should help us in our first steps of using Pitco L20-293
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Pitco L20-293
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Pitco L20-293 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Pitco L20-293?

Use the form below

If you did not solve your problem by using a manual Pitco L20-293, ask a question using the form below. If a user had a similar problem with Pitco L20-293 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)