English dropdown-ico

Manual Enviro 1000

19 pages 0.8 mb
Download

Go to site of 19

Summary
  • Enviro 1000 - page 1

    ENVIROFIRE WOOD STOVE MODELS 1000, 1600, 1600INS, 2100 OWNERS AND OPERATORS MANUAL SHERWOOD INDUSTRIES LTD. 6782 OLDFIELD ROAD VICTORIA , BRITISH COLUMBIA V8M-2A3 ...

  • Enviro 1000 - page 2

    TABLE OF CONTENTS • PLEASE READ AND SAVE INSTRUCTIONS SAFETY WARNING 2 • OPERATING INSTRUCTIONS 3 - 4 • • PEDESTAL INSTALLATION 5 • BRICK INSTALLATION • M O D E L 1 0 0 0 6 • MODEL 1600 INSERT 7 • M O D E L 2 1 0 0 8 • FREESTANDING INSTALLATION 9 - 1 0 • MOBILE HOME INSTALLATION 1 1 • FIREPLACE INSERT INSTALLATION 1 2 • HOW ...

  • Enviro 1000 - page 3

    OPERATING INSTRUCTIONS STARTING: Place crumpled paper on t he stove floor and cover with ki ndling. Open the draft fully and ignite. Hold the door slightly a jar for a few minutes and then close tightly. A fter the wood is burning b rightly add more dry wood and, when the fire is hot, use the draft control to adjust the burn rate. This limits the a ...

  • Enviro 1000 - page 4

    DISPOSAL OF ASHES: If you let the ashes accumulate two or three in ches on the floor they tend to burn themselves up. Open the small trap door located on the floor of the unit. Push the ashe s that have accumul ated into the hole were the ashes would drop into the ash pan. Ensure tha t the trap door is closed properly before relighting the unit. Wh ...

  • Enviro 1000 - page 5

    PEDESTAL AND LEG INSTALLATION Please read and understand these instruction s before installing ash pan and leg option. Failure to follow these instructions caref ully c ould cause personal injury or prop erty damage. All screws are pre installe d on the base of the unit. PEDESTAL • Remove the bricks from the unit before starting. • Loosen the t ...

  • Enviro 1000 - page 6

    MODEL 1000 BRICK PLACEMENT: COMPLETE THE STOVE AND SMOKE PIPE INSTALLATION BEFORE PLACING THESE BRICKS. 1. Place the bottom layers of the sides and ba ck of the firebox. 2. Place the floor bricks. The spaces betwe en the bricks will soon fill with ashes. 3. Finish the sides and back ready to accept the top, ceiling bricks. 4. On the right and left ...

  • Enviro 1000 - page 7

    MODEL 1600 BRICK PLACEMENT: COMPLETE THE STOVE AND SMOKE PIPE INSTALLATION BEFORE PLACING THESE BRICKS. 1. Place the bottom layers of the sides and ba ck of the firebox. 2. Place the floor bricks. The spaces betwe en the bricks will soon fill with ashes. 3. Finish the sides and back ready to accept the top, ceiling bricks. 4. On the right and left ...

  • Enviro 1000 - page 8

    MODEL 2100 BRICK PLACEMENT: COMPLETE THE STOVE AND SMOKE PIPE IN STALLATION BEFORE PLACING BRICKS. 1. Place the bottom layers of the sides and ba ck of the firebox. 2. Place the floor bricks. The spaces betwe en the bricks will soon fill with ashes. 3. Finish the sides and back ready to accept the top, ceiling bricks. 4. On the right and left sides ...

  • Enviro 1000 - page 9

    FREESTANDING INSTALLATION: CHIMNEY : Vent the stove into a clean, lined, approved masonry chimney in good condition, conformi ng to local building codes or a listed 6” fa ctory built chimney suitable for use with solid fuels an d conforming to, ULC-S629 in CANADA or UL - 103HT in the U.S.A.. Connect the stove to this chimney with a short and stra ...

  • Enviro 1000 - page 10

    OUTSIDE AIR: Pedestal rear A 4” (10.16 cm) fresh air adapter kit is a vailable. This adapter can be installed either on the back pedestal or through the floor under the p edestal. Place the 1/4” mesh screen between the fresh air ad apter and the body of the pedestal. (AS SHOWN) NOTE: Fresh air connectio n to the unit must be a non combustible p ...

  • Enviro 1000 - page 11

    MOBILE HOME INSTALLATION SPECIAL REQUIREMENTS: Pedestal model s 1000 and 1600 are approved for mobile home s. All freestanding installation requirements o n the preceding page plus the following must be met: VENTING: In Canada: Any ULC-629 listed chimn ey system with t he accompanying double wall vent connector. In U.S.A. Any HT-103 listed chimne y ...

  • Enviro 1000 - page 12

    MODEL 1600 INS FIREPLACE INSERT Unless you are experienced, we recommend installation by your dealer or a professional installe r. Install only in a masonry fireplace at least 25” (63 5 mm) wide, 22” (560 mm) high and 1 4” (356 mm) deep with an approved lined chim ney at least 15 ft (4.6 m) high, both of which have been constructed in accorda ...

  • Enviro 1000 - page 13

    HOW IT WORKS SPECIFICATIONS: MODEL 1000 MODEL 1600 MODEL 1600fpi MODEL 2100 WIDTH X DEPTH 24 X 21” (.61 X .53 M) 24 X 25.5” (.61 X ..64 M) 24 X 25.5” (.61 X ..64 M) 24 X 30” (.61 X .76 M) HEIGHT ON PEDESTAL 33 “ (.83 M) 33 “ (.83 M) N/A 33 “ (.83 M) HEIGHT OF BODY 22” (.56 M) 22” (. 56 M) 22” (.56 M) 22” (.56 M) FUEL CHAMBER D ...

  • Enviro 1000 - page 14

    DOOR INSTALLATION Remove the door from the packaging. Inspect the do or assembly for damage. DO NOT USE DOOR IF GLASS IS BROKEN. Place the door assembly on the two hinge pins moun ted on the body of the unit. Open and close the door, ap plying pressure down, to ensure the door assembly is pro perly seated on the hinges. NUT CAST LATCH WASHERS X 2 S ...

  • Enviro 1000 - page 15

    OPTIONAL FAN INSTALLATION The appliance when install ed, must be electrically connecte d and grounded in accordan ce with local codes or in the absence of local codes, with the current CSA C22.1 CANA DIAN ELECTRICAL CODE. Part 1, SAFETY STANDARDS FOR ELECTRICAL INSTALLA TIONS, or THE NATIONAL ELECTR ICAL CODE ANSI / NFPA 70 in the USA. CAUTION Labe ...

  • Enviro 1000 - page 16

    DO NOT REMOVE THIS LABEL WH- LISTED SOLID FUEL SPACE HEATER SERIAL NO . MODEL:  1000  1600  2100  1600 INS MODEL 1000 SUITABLE FOR USE IN MOBILE HOMES. CERTIFIED FOR CANADA AND THE U.S.A. REPORT NO. J99011443-231 TESTED TO CSA B366.2/ULC-S627, ULC-S628-M93, UL-1482-1994 REP ORT NO. 6385 INSTALL AND USE ONLY IN ACCORDANCE WI TH THE MANUF ...

  • Enviro 1000 - page 17

    PARTS AND ACCESSIORIES PLEASE CONTACT YOUR LOCAL E NVIROFIRE DEALER WHEN REPLACE MENT PARTS ARE REQUIRED. EF-163 WOOD STOVE PAINTED DOOR EF-164 WOOD STOVE GOLD DOOR EF-165 1600 FPI PANEL SET (REGULAR) EF-166 1600 FPI PANEL SET (OVERSIZE) EF-167 FAN KIT (1000, 1600, 2100, (FREESTANDING ONLY) EF-168 DOOR GASKET EF-169 CLAYBURN BRICKS EF-170 INNER DOO ...

  • Enviro 1000 - page 18

    WARRANTY Because of our high standard s Sherwood Industries Ltd. can offer a *Lifetim e Warranty on all it’s wood product s. Covered under this warranty are Cabin et Sides, Tops , Pedestals, Surround Panels, Removabl e Air Channel, and Chassis. These steel compone nts are covered against manuf acture’s defects for 1 year on parts an d labor and ...

  • Enviro 1000 - page 19

    SET OF FOUR (4) LEGS W/ ASH PAN EF 1000 PAINTED -EFW 250 GOLD -EFW 251 NICKEL- EFW 252 EF 1600-2100 PAINTED- EFW-265 GOLD- EFW-267 NICKEL- EFW-269 SPRING HANDLE GOLD 10-006 NICKEL 10-007 GLASS W/ TAPE 10-000 CAST DOOR W/ GLASS PAINTED EFW-258 GOLD EFW-259 NICKEL EFW-260 DOOR HANDLE ASSEMBLY 10-001 SOLID ASH COVER EF-196 SLIDER DAMPER SPRING HANDLE ...

Manufacturer Enviro Category Stove

Documents that we receive from a manufacturer of a Enviro 1000 can be divided into several groups. They are, among others:
- Enviro technical drawings
- 1000 manuals
- Enviro product data sheets
- information booklets
- or energy labels Enviro 1000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Enviro 1000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Enviro 1000, service manual, brief instructions and user manuals Enviro 1000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Enviro 1000.

Similar manuals

A complete manual for the device Enviro 1000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Enviro 1000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Enviro 1000.

A complete Enviro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Enviro 1000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Enviro 1000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Enviro 1000, that we can find in the current document
3. Tips how to use the basic functions of the device Enviro 1000 - which should help us in our first steps of using Enviro 1000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Enviro 1000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Enviro 1000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Enviro 1000?

Use the form below

If you did not solve your problem by using a manual Enviro 1000, ask a question using the form below. If a user had a similar problem with Enviro 1000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)