English dropdown-ico

Manual ATEN VS-881

16 pages 5.69 mb
Download

Go to site of 16

Summary
  • ATEN VS-881 - page 1

    User Manual VS-881 Read this guide thoroughly and follow the installation and operation proce- dures carefully in order to prevent any damage to the units and/or any de- vices that connect to them. This package contains: M 1 8 Port Video Switch M 1 Infrared Remote Control Handset M 1 Infrared Receiver (with 1.8m attached cable) M 1 Video Cable (1.2 ...

  • ATEN VS-881 - page 2

    NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Subpart J of Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not ...

  • ATEN VS-881 - page 3

    Overview The VS-881 Video Switch is a modern control unit that allows you to conveniently display the video output of eight separate computer systems on a single monitor, or via a multimedia projector - thereby eliminating the unnecessary expense of purchasing a separate monitor for each computer. The VS-881 is perfect for corporate presentations, ...

  • ATEN VS-881 - page 4

    Features M Displays the video output of eight separate computers on a single monitor or projector M New modern concentric design with logical connector layout for quick and easy access M Fast and convenient computer selection via push buttons or infrared (IR) remote control M External IR Receiver (1.8m) for maximum efficiency and convenience M Extr ...

  • ATEN VS-881 - page 5

    System Requirements M One VGA, SVGA, XGA, or Multisync compatible analog monitor, with a standard PC high density cable having a 15 pin HDB type male connector M One VGA, SVGA, XGA,or Multisync analog video card having a standard PC 15 pin HDB type female connector per computer. M A video cable with one male and one female HDB-15 connector at each ...

  • ATEN VS-881 - page 6

    Front View 1. IR Reciever Port The external IR Receiver has an attached cable that allows it to be placed anywhere up to 1.8m from the switch, The cable from the external IR Receiver plugs in here. 2. Monitor Port The cable from the monitor or digital projector plugs in here. 3. Power Jack The AC Power Adapter cable plugs in here. - 4 - 12 3 2002-1 ...

  • ATEN VS-881 - page 7

    Rear View 1. Video Ports The cables that connect to the computer video ports plug in here. There are eight video ports distributed around the VS-881 ’ s circumference. - 5 - 11 2002-12-13 ...

  • ATEN VS-881 - page 8

    Top View 1. Port LEDs M A LED lights ORANGE to indicate the computer connected to to its corresponding port is Online. M The LED changes to GREEN to indicate the computer connected to to its corresponding port is the one that is currently selected. M The LED goes out when the computer connected to to its corresponding port is in Standby mode. 2. Po ...

  • ATEN VS-881 - page 9

    IR Remote Control Unit 1. VGA Display ON / OFF Powers the unit ’ s VGA display ON and OFF. 2. Port Up / Port Down These buttons function in a similar manner to the Port Up / Port Down buttons on the main unit. Press these buttons to switch the video focus to the NEXTor PREVIOUS computer on the installation. 3. Port Selection The numbers correspon ...

  • ATEN VS-881 - page 10

    Installation Installation is simply a matter of plugging in cables. 1. Make sure that power to all the devices you will be connecting up have been turned off. 2. Plug the monitor or digital projector cable into the unit ’ s Monitor port. 3. Plug one end of a video cable (see the Sy stem Requirements section on p. 3), into any available video port ...

  • ATEN VS-881 - page 11

    - 9 - 2002-12-13 ...

  • ATEN VS-881 - page 12

    Port Selection Manual Port Up / Port Down Use the Port Up and Port Down buttons, located on the top of the VS-881 unit, to cycle the video focus to the port you want. A Port LED changes from ORANGE to GREEN to indicate that the computer connected to its corresponding port has the video focus. IR Port Up / Port Down The video focus can also be cycle ...

  • ATEN VS-881 - page 13

    IR Direct Port Selection Instead of cycling among the individual computers one-by-one, a computer can be directly selected by pushing the button on the Remote Control Unit that corresponds to its port number (1-8) on the main unit. The selected port ’ s LED changes from ORANGE to GREEN to indicate that the computer connected to its corresponding ...

  • ATEN VS-881 - page 14

    Specifications Function Specification Connectors Video In 8 HDB-15 Male Video Out 1 HDB-15 Female Power In 1 Power Adapter Jack IR 1 Earphone Jack LEDs 8 Online / Selected (Orange / Green) 1 VGA Display ON/OFF (B lue) Port Selection Push Button Swi tches / IR Remote Control Video Resoluti on 2048 x 1536 Power Consumption AC 9V, 4.5W Operating Tempe ...

  • ATEN VS-881 - page 15

    Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR ’ S LIABILITY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION EXCEED THE PRICE PAID FOR THE PRODUCT. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the ...

  • ATEN VS-881 - page 16

    Notes: - 14 - 2002-12-13 ...

Manufacturer ATEN Category Switch

Documents that we receive from a manufacturer of a ATEN VS-881 can be divided into several groups. They are, among others:
- ATEN technical drawings
- VS-881 manuals
- ATEN product data sheets
- information booklets
- or energy labels ATEN VS-881
All of them are important, but the most important information from the point of view of use of the device are in the user manual ATEN VS-881.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals ATEN VS-881, service manual, brief instructions and user manuals ATEN VS-881. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product ATEN VS-881.

Similar manuals

A complete manual for the device ATEN VS-881, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use ATEN VS-881 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of ATEN VS-881.

A complete ATEN manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual ATEN VS-881 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the ATEN VS-881, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the ATEN VS-881, that we can find in the current document
3. Tips how to use the basic functions of the device ATEN VS-881 - which should help us in our first steps of using ATEN VS-881
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with ATEN VS-881
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of ATEN VS-881 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning ATEN VS-881?

Use the form below

If you did not solve your problem by using a manual ATEN VS-881, ask a question using the form below. If a user had a similar problem with ATEN VS-881 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)