English dropdown-ico

Manual Graham Field 765000

24 pages 0.62 mb
Download

Go to site of 24

Summary
  • Graham Field 765000 - page 1

    765000 AL TERNA TING PRESSURE MA TTRESS SYSTEM WITH ACTIVE SENSOR TECHNOL OGY USER MANUAL Impor tant: Do not operate the Mattress System without rst reading and understanding this manual! Save this manual for future use. Note: The most current version of this manual can be found online at www.grahameld.com 765000-INS-LAB-RevB10 ...

  • Graham Field 765000 - page 2

    2 765000-INS-LAB-RevB10 CONTENTS INTRODUCTION ..................................................................................... 3 INTENDED USE OF THIS DEVICE ........................................................ 3 IMPORT ANT SAFETY PRECAUTIONS .................................................. 4 DANGER ....................................... ...

  • Graham Field 765000 - page 3

    765000-INS-LAB-RevB10 3 INTRODUCTION Use this manual for set-up and operation of the Lumex ® AltaDyne ® Sensor Plus 765000 Alternating Pr essur e Mattr ess System with Active Sensor T echnology . Read all instructions befor e using the mattr ess system. Save this manual for futur e r efer ence. INTENDED USE OF THIS DEVICE The intended use of the ...

  • Graham Field 765000 - page 4

    4 765000-INS-LAB-RevB10 IMPORT ANT SAFETY PRECA UTIONS The safety statements pr esented in this chapter r efer to the basic safety information that should be obser ved by those using this Mattr ess System. Ther e ar e additional safetystatementsinotherchaptersorsections,whichmay bethesameasorsimilarto ...

  • Graham Field 765000 - page 5

    765000-INS-LAB-RevB10 5 W ARNING: Always use close supervision when this product is used by , on, or near children or those who require close supervision. W ARNING: Use this product only as intended and described in this manual. Do not use attachments or accessories not recommended by Graham-Field. W ARNING: Never operate this product if: a) It has ...

  • Graham Field 765000 - page 6

    6 765000-INS-LAB-RevB10 W ARNING: Patient entrapment with bed side rails may cause injury or death. The bed frame and its components, including the mattress, bed side rails, head and foot board, bedding, and any accessories added to the bed, can all affect the risk of entrapment. Thorough patient assessment and monitoring are necessary to reduce th ...

  • Graham Field 765000 - page 7

    765000-INS-LAB-RevB10 7 EQUIPMENT SYMBOLS Manufacturer Indicates that this product is according to the degree of protection against electric shock for type BF equipment Functional earth (for UL only) Attention! Read the instructions! Disposal of Electrical & Electronic Equipment (WEEE): Do not treat this product as household waste. For more det ...

  • Graham Field 765000 - page 8

    8 765000-INS-LAB-RevB10 PRODUCT DESCRIPTION PUMP AND MA TTRESS SY STEM pumpandmattresssystem CPRvalves quickconnectors (mattress-pump connectors) mattress footend symbol pump PUMP: FRONT quickconnector front panel PUMP: REAR mainpower switch powercord receptacle fuse hanger filter ...

  • Graham Field 765000 - page 9

    765000-INS-LAB-RevB10 9 PUMP: FRONT P ANEL Fr ont panel of pump is shown below . Descriptions of but- tons and indicators follow . T uningbutton; indicatorsatleftofbutton Powerfailureindicator Alarmmutebutton Serviceindicator Power(ON/OFF)button; indicatoratrightofbutton Panellockbutton; indicat ...

  • Graham Field 765000 - page 10

    10 765000-INS-LAB-RevB10 Tuning button: Thetuningbuttonne-tunesthe mattr ess system's auto-adjusted pr essur e. Thr ee tuning settings ar e available: 0 System auto-adjusted pr essur e - One level softer than auto-adjusted pr essur e +  Onelevelrmerthanauto-adjustedpr essur e Note: The tuning function ...

  • Graham Field 765000 - page 11

    765000-INS-LAB-RevB10 11 Maxfir m button: The pump will automatically enter maxrmmodeever ytimethepoweristurnedon.Maxrm mode ensur es the pump is able to r each its maximum oper- atingpr essur e.Maxrmmodewilllastfor20minutes,and then the system will automatically enter auto-adjus ...

  • Graham Field 765000 - page 12

    12 765000-INS-LAB-RevB10 Low pr essur e indicator: The low pressur e indicator(yellowLED)illuminates,andthealarmsounds, whenanabnormallylowpr essur eleveloccurs.Ifthelow pr essur e indicator persistently illuminates inappr opriately: 1. Checktoensur eallconnectionsar epr ope ...

  • Graham Field 765000 - page 13

    765000-INS-LAB-RevB10 13 INST ALLA TION UNP ACKING 1. Car efullyr emoveallcomponentsfr omthecarton. 2. Inspectallcomponents. 3. Ifdamageisevidenttothecontents,pleasenotifythe carrierandyourGraham-Fieldequipmentpr ovider . PUMP AND MA TTRESS SETUP 1. Removeallshee ...

  • Graham Field 765000 - page 14

    14 765000-INS-LAB-RevB10 W ARNING: Locate all cords so that they will not be stepped on, tripped over , or otherwise subjected to damage or stress. W ARNING: Do not use a household extension cord if the electrical cord does not reach the power outlet. Use of an improper extension cord could result in re and electric shock. If an extension cord m ...

  • Graham Field 765000 - page 15

    765000-INS-LAB-RevB10 15 OPERA TION GETTING ST AR TED 1. T urnthemainpowerswitch to the ON position. 2. Pr essthefr ontpanelpower button. The power indicator will illuminate. Note: The mattress system will automatically enter maxfirm mode for the quickest inflation at set-up; when inflated, it will then automa ...

  • Graham Field 765000 - page 16

    16 765000-INS-LAB-RevB10 TRANSPORT CAP Incaseofpowerfailur eortrans - port:Disconnectthequickconnec - tor and cap the mattr ess with the transport cap to slow deation. Note: This system is equipped with cell-on-cell technology to provide added support and prevent bottoming out in the event of a power failure. Lower ...

  • Graham Field 765000 - page 17

    765000-INS-LAB-RevB10 17 MAINTENANCE CLEANING W ARNING: T o reduce the risk of increased bacterial growth, infection, illness, or injury from contamination, thoroughly clean and dry the mattress system before use and as necessary during use as follows: Pump :W ipethepumpwithaclean,dampclothandmild deter gent,and? ...

  • Graham Field 765000 - page 18

    18 765000-INS-LAB-RevB10 Fuse replacement tool needed: small screwdriver 1. Ifyoususpectablownfuse,discon - nect the plug fr om the wall outlet immediately . 2. Use a small scr ewdriver to r emove the cover of the fuse holder (fuse lo- cations ar e shown in pictur e at right). 3. Insertanewfuseofthecorre ...

  • Graham Field 765000 - page 19

    765000-INS-LAB-RevB10 19 SPECIFICA TIONS Pump Specication Power Supply (Note: see rating label on product) AC 120V 60 Hz 0.17A (for 120V system) Fuse Rating T1A, 250V Cycle time Fixed / 10 minutes Dimensions (L x W x H) 1 1.4" x 7.9" x 4.6" (29.1 x 20 x 11.7 cm) Weight 5 lb (2.2 kg) Environment T emperature Operation: 50°F to 104 ...

  • Graham Field 765000 - page 20

    20 765000-INS-LAB-RevB10 LIMITED WARRANTY GFHealthPr oducts,Inc.warrantstheLumex ® AltaDyne ® Sensor Plus 765000 Alternating Pr essur e Mattr ess Sys- tem with Active Sensor T echnology for a period of twelve monthsfordefectsinworkmanshipandmaterials.Ifa pr oductisdeemedtobeunderwarra ...

  • Graham Field 765000 - page 21

    765000-INS-LAB-RevB10 21 APPENDIX A: EMC INFORMA TION Guidance and Manufacturer’s De claration- Electromagnetic Emissions: This device is intended for use in the electromagnetic environment specified below. The user of this device should make sure it is used in such an environment. Emissions T est Compliance Electromagnetic Environment-Gui dance ...

  • Graham Field 765000 - page 22

    22 765000-INS-LAB-RevB10 Guidance and Manufact urer ’ s Declaration- Electromagn etic Immunity: This device is intended for use in the electromag netic environment specified below . The user of this device should make sure it is used in such an environment. Immunity T est IEC60601 test level Compliance Electromagnetic Environment-Guidance Conduct ...

  • Graham Field 765000 - page 23

    765000-INS-LAB-RevB10 23 a The ISM (indu strial, scientific and medica l) bands between 150 kHz and 80 MHz are 6,765 MHz to 6,795 MHz;13,553 MHz to 13,567 MHz; 26,957 MHz to 27,283 MHz; and 40,66 M Hz to 40,70 MHz. b The compliance levels in the ISM frequency bands between 150 kHz and 80 MHz and in the frequency range 80 MHz to 2,5 GHz are intended ...

  • Graham Field 765000 - page 24

    USA Corporate Headquar ters: GF Health Products, Inc. 2935 Nor theast Parkway Atlanta, Georgia 30360 telephone: 800-347-5678, 770-368-4700 fax: 800-726-0601, 678-291-3232 www .grahamfield.com © 2010 GF Health Products, Inc. ...

Manufacturer Graham Field Category Camping Equipment

Documents that we receive from a manufacturer of a Graham Field 765000 can be divided into several groups. They are, among others:
- Graham Field technical drawings
- 765000 manuals
- Graham Field product data sheets
- information booklets
- or energy labels Graham Field 765000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Graham Field 765000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Graham Field 765000, service manual, brief instructions and user manuals Graham Field 765000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Graham Field 765000.

Similar manuals

A complete manual for the device Graham Field 765000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Graham Field 765000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Graham Field 765000.

A complete Graham Field manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Graham Field 765000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Graham Field 765000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Graham Field 765000, that we can find in the current document
3. Tips how to use the basic functions of the device Graham Field 765000 - which should help us in our first steps of using Graham Field 765000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Graham Field 765000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Graham Field 765000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Graham Field 765000?

Use the form below

If you did not solve your problem by using a manual Graham Field 765000, ask a question using the form below. If a user had a similar problem with Graham Field 765000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)