English dropdown-ico

Manual Cisco Systems VCO/4K

18 pages 2.08 mb
Download

Go to site of 18

Summary
  • Cisco Systems VCO/4K - page 1

    CHAPTER 4-1 Cisco VCO/4K Mechanical Assemblies 78-10334-03 4 Storage/Control I/O Module The Storage/Control I/O Module performs two functions: to connect outside interfaces to the system controller and to house the hard disk driv e. It plugs into the back of the VCO/4K system and provides the I/O interfaces for system peripheral de vices and host c ...

  • Cisco Systems VCO/4K - page 2

    4-2 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Description The Storage I/O Module is two card slots wide and slides into the back of the VCO system where it plugs into the control midplane. All outside connections are mounted on the faceplate of the module. All internal connectors are mounted on ...

  • Cisco Systems VCO/4K - page 3

    4-3 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Figur e 4-1 Stor age/Contr ol I/O Module Fr ont P anel Power is supplied to the Storage/Control I/O Module via the midplane from the Combined Controller card. The hard driv e LED signal is brought to the system controller board via the midplane and b ...

  • Cisco Systems VCO/4K - page 4

    4-4 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description The connectors mounted on the front pane are: : The connectors mounted on the board are: The LEDs mounted on the board are: Hard Disk Drive The hard disk driv e is a SCSI-compatible driv e that is used as the system controller’ s main data storage ...

  • Cisco Systems VCO/4K - page 5

    4-5 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Figur e 4-2 Location of the Hard Disk Dr ive on the Stor age/Contr ol I/O Module Hard disk drive 50166 ...

  • Cisco Systems VCO/4K - page 6

    4-6 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Figur e 4-3 Location of Hard Disk Dr ive LED on the Combined Controller Midplane Connectors The Storage/Control I/O Module plugs into the midplane through standard DIN 41612 triple-row , 96-pin male connectors. Figure 4-4 shows the control midplane c ...

  • Cisco Systems VCO/4K - page 7

    4-7 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Figur e 4-4 Control Midplane Serial Ports 1 and 2 Serial Port 1/Console and Serial Port 2/TTY01 are dedicated ports for connecting the system master console and remote maintenance modem, respectiv ely . These standard female DB-25 ports connect to th ...

  • Cisco Systems VCO/4K - page 8

    4-8 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Master console and remote maintenance modem operating parameters (Baud Rate, Stop Bits, Bits per Character and Parity) are def ined in the system database via the Peripheral Conf iguration screen. W iring for serial port connection to the Master Cons ...

  • Cisco Systems VCO/4K - page 9

    4-9 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Serial Ports 3 and 4 Serial Ports 3 and 4 are av ailable for Serial I/O (SIO) links between the system and a host computer . These standard female DB-25 ports carry Asynchronous Data Link Control (ADLC) protocol signals between the host and the syste ...

  • Cisco Systems VCO/4K - page 10

    4-10 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description T o implement Ethernet links, you must purchase the optional Ethernet Communications Package av ailable from Cisco Systems. This package contains supporting software and the Cisco VCO/4K Ethernet Guide which cov ers the cabling requirements and impl ...

  • Cisco Systems VCO/4K - page 11

    4-11 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Hardware Configuration Note Y ou can use a 36-conductor , straight-through parallel cable to connect a printer to the system controller . Howe ver , only the conductors sho wn in Figure 4-7are used. For more information on the parallel 36-pin Centronics cable a ...

  • Cisco Systems VCO/4K - page 12

    4-12 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Hardware Configuration Y ou can position the jumpers in locations JP13 and JP18 (under the “T o T erminal” etching) to conf igure the CPU as a DCE termination. Moving the jumpers to these locations supports the follo wing SIO connections: • Straight-throu ...

  • Cisco Systems VCO/4K - page 13

    4-13 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Removal and Replacement Information Figur e 4-9 Jumper Configuration f or DCE/DTE, Ser ial P orts 1 -4 Serial port 4 can be conf igured to use clock signals by the TRXC4 and R TXC4 signal lines. Jumper JP15 conf igurations of the clock lines are shown in Figur ...

  • Cisco Systems VCO/4K - page 14

    4-14 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Removal and Replacement Information Figur e 4-1 1 Storag e/Contr ol I/O Module Location FAN ALARM REMOTE ALARMS REMOTE SWITCH A/B ETHERNET ETHERNET PRINTER PRINTER SCSI INTERFA CE SCSI INTERFA CE ST /CTRL - I/O ST /CTRL - I/O SCSI TRIM PWR ENET PWR SCSI TRIM PW ...

  • Cisco Systems VCO/4K - page 15

    4-15 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Removal and Replacement Information Removal Procedures Caution Follo w ESD rules when removing a system component. Use a wrist strap for grounding. T o remov e a Storage/Control I/O Module in a nonredundant system, do the following. Caution In a nonredundant sy ...

  • Cisco Systems VCO/4K - page 16

    4-16 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Troubleshooting Replacement Procedures Caution Follo w ESD rules when removing a system component. Use a wrist strap for grounding. T o replace the Storage/Control I/O Module: Step 1 Place the replacement Storage/Control I/O Module on the antistatic mat or en v ...

  • Cisco Systems VCO/4K - page 17

    4-17 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Troubleshooting Note The ENET PWR LED should be illuminated only when Ethernet is being used. If the ENET PWR LED is not illuminated and Ethernet is being used, contact Cisco Systems T echnical Support. Troubleshooting Reference Materials For detailed informati ...

  • Cisco Systems VCO/4K - page 18

    4-18 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Troubleshooting ...

Manufacturer Cisco Systems Category Switch

Documents that we receive from a manufacturer of a Cisco Systems VCO/4K can be divided into several groups. They are, among others:
- Cisco Systems technical drawings
- VCO/4K manuals
- Cisco Systems product data sheets
- information booklets
- or energy labels Cisco Systems VCO/4K
All of them are important, but the most important information from the point of view of use of the device are in the user manual Cisco Systems VCO/4K.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Cisco Systems VCO/4K, service manual, brief instructions and user manuals Cisco Systems VCO/4K. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Cisco Systems VCO/4K.

Similar manuals

A complete manual for the device Cisco Systems VCO/4K, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Cisco Systems VCO/4K by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Cisco Systems VCO/4K.

A complete Cisco Systems manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Cisco Systems VCO/4K - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Cisco Systems VCO/4K, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Cisco Systems VCO/4K, that we can find in the current document
3. Tips how to use the basic functions of the device Cisco Systems VCO/4K - which should help us in our first steps of using Cisco Systems VCO/4K
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Cisco Systems VCO/4K
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Cisco Systems VCO/4K in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Cisco Systems VCO/4K?

Use the form below

If you did not solve your problem by using a manual Cisco Systems VCO/4K, ask a question using the form below. If a user had a similar problem with Cisco Systems VCO/4K it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)