Cisco Systems VCO/4Kの取扱説明書

18ページ 2.08 mb
ダウンロード

ページに移動 of 18

Summary
  • Cisco Systems VCO/4K - page 1

    CHAPTER 4-1 Cisco VCO/4K Mechanical Assemblies 78-10334-03 4 Storage/Control I/O Module The Storage/Control I/O Module performs two functions: to connect outside interfaces to the system controller and to house the hard disk driv e. It plugs into the back of the VCO/4K system and provides the I/O interfaces for system peripheral de vices and host c ...

  • Cisco Systems VCO/4K - page 2

    4-2 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Description The Storage I/O Module is two card slots wide and slides into the back of the VCO system where it plugs into the control midplane. All outside connections are mounted on the faceplate of the module. All internal connectors are mounted on ...

  • Cisco Systems VCO/4K - page 3

    4-3 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Figur e 4-1 Stor age/Contr ol I/O Module Fr ont P anel Power is supplied to the Storage/Control I/O Module via the midplane from the Combined Controller card. The hard driv e LED signal is brought to the system controller board via the midplane and b ...

  • Cisco Systems VCO/4K - page 4

    4-4 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description The connectors mounted on the front pane are: : The connectors mounted on the board are: The LEDs mounted on the board are: Hard Disk Drive The hard disk driv e is a SCSI-compatible driv e that is used as the system controller’ s main data storage ...

  • Cisco Systems VCO/4K - page 5

    4-5 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Figur e 4-2 Location of the Hard Disk Dr ive on the Stor age/Contr ol I/O Module Hard disk drive 50166 ...

  • Cisco Systems VCO/4K - page 6

    4-6 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Figur e 4-3 Location of Hard Disk Dr ive LED on the Combined Controller Midplane Connectors The Storage/Control I/O Module plugs into the midplane through standard DIN 41612 triple-row , 96-pin male connectors. Figure 4-4 shows the control midplane c ...

  • Cisco Systems VCO/4K - page 7

    4-7 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Figur e 4-4 Control Midplane Serial Ports 1 and 2 Serial Port 1/Console and Serial Port 2/TTY01 are dedicated ports for connecting the system master console and remote maintenance modem, respectiv ely . These standard female DB-25 ports connect to th ...

  • Cisco Systems VCO/4K - page 8

    4-8 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Master console and remote maintenance modem operating parameters (Baud Rate, Stop Bits, Bits per Character and Parity) are def ined in the system database via the Peripheral Conf iguration screen. W iring for serial port connection to the Master Cons ...

  • Cisco Systems VCO/4K - page 9

    4-9 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description Serial Ports 3 and 4 Serial Ports 3 and 4 are av ailable for Serial I/O (SIO) links between the system and a host computer . These standard female DB-25 ports carry Asynchronous Data Link Control (ADLC) protocol signals between the host and the syste ...

  • Cisco Systems VCO/4K - page 10

    4-10 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Description T o implement Ethernet links, you must purchase the optional Ethernet Communications Package av ailable from Cisco Systems. This package contains supporting software and the Cisco VCO/4K Ethernet Guide which cov ers the cabling requirements and impl ...

  • Cisco Systems VCO/4K - page 11

    4-11 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Hardware Configuration Note Y ou can use a 36-conductor , straight-through parallel cable to connect a printer to the system controller . Howe ver , only the conductors sho wn in Figure 4-7are used. For more information on the parallel 36-pin Centronics cable a ...

  • Cisco Systems VCO/4K - page 12

    4-12 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Hardware Configuration Y ou can position the jumpers in locations JP13 and JP18 (under the “T o T erminal” etching) to conf igure the CPU as a DCE termination. Moving the jumpers to these locations supports the follo wing SIO connections: • Straight-throu ...

  • Cisco Systems VCO/4K - page 13

    4-13 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Removal and Replacement Information Figur e 4-9 Jumper Configuration f or DCE/DTE, Ser ial P orts 1 -4 Serial port 4 can be conf igured to use clock signals by the TRXC4 and R TXC4 signal lines. Jumper JP15 conf igurations of the clock lines are shown in Figur ...

  • Cisco Systems VCO/4K - page 14

    4-14 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Removal and Replacement Information Figur e 4-1 1 Storag e/Contr ol I/O Module Location FAN ALARM REMOTE ALARMS REMOTE SWITCH A/B ETHERNET ETHERNET PRINTER PRINTER SCSI INTERFA CE SCSI INTERFA CE ST /CTRL - I/O ST /CTRL - I/O SCSI TRIM PWR ENET PWR SCSI TRIM PW ...

  • Cisco Systems VCO/4K - page 15

    4-15 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Removal and Replacement Information Removal Procedures Caution Follo w ESD rules when removing a system component. Use a wrist strap for grounding. T o remov e a Storage/Control I/O Module in a nonredundant system, do the following. Caution In a nonredundant sy ...

  • Cisco Systems VCO/4K - page 16

    4-16 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Troubleshooting Replacement Procedures Caution Follo w ESD rules when removing a system component. Use a wrist strap for grounding. T o replace the Storage/Control I/O Module: Step 1 Place the replacement Storage/Control I/O Module on the antistatic mat or en v ...

  • Cisco Systems VCO/4K - page 17

    4-17 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Troubleshooting Note The ENET PWR LED should be illuminated only when Ethernet is being used. If the ENET PWR LED is not illuminated and Ethernet is being used, contact Cisco Systems T echnical Support. Troubleshooting Reference Materials For detailed informati ...

  • Cisco Systems VCO/4K - page 18

    4-18 Cisco VCO/4K Mechanical Assemblies 78-10334-03 Chapter 4 Storage/Control I/O Module Troubleshooting ...

メーカー Cisco Systems カテゴリー Switch

Cisco Systems VCO/4Kのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- VCO/4Kの取扱説明書
- Cisco Systemsの製品カード
- パンフレット
- またはCisco Systems VCO/4Kの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Cisco Systems VCO/4Kの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Cisco Systems VCO/4Kの取り付け説明書、サービスマニュアル、簡易説明書、またはCisco Systems VCO/4Kのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Cisco Systems VCO/4Kの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Cisco Systems VCO/4Kデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがCisco Systems VCO/4Kを使用するのを助ける技術的文書のことです。説明書は通常、全てのCisco Systems VCO/4Kユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Cisco Systemsの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Cisco Systems VCO/4Kの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははCisco Systems VCO/4Kの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Cisco Systems VCO/4Kに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Cisco Systems VCO/4Kデバイスの基本機能を使うにあたってのヒント。 Cisco Systems VCO/4Kのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Cisco Systems VCO/4Kに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるCisco Systems VCO/4Kのメーカー/サービスへの連絡先に関する情報。

Cisco Systems VCO/4Kについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもCisco Systems VCO/4Kの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがCisco Systems VCO/4Kで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)