English dropdown-ico

Manual Vulcan-Hart EF5 ML-114944

12 pages 0.24 mb
Download

Go to site of 12

Summary
  • Vulcan-Hart EF5 ML-114944 - page 1

    INST ALLA TION & OPERA TION MANU AL VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201-0696, TEL. (502) 778-2791 FORM 31052 (1-98) MODELS EF3, EF4, & EF5 ECONOFR Y GAS FR YERS MODELS EF3 ML-52099 EF4 ML-114943 EF5 ML-114944 Model EF3 ...

  • Vulcan-Hart EF5 ML-114944 - page 2

    — 2 — IMPOR T ANT FOR Y OUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL GAS EQUIPMENT, WHO SHOULD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL. POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED. THIS INFORMATION CAN BE ...

  • Vulcan-Hart EF5 ML-114944 - page 3

    — 3 — Installation, Operation and Care of MODELS EF3, EF4 & EF5 ECONOFR Y GAS FR YERS KEEP THESE INSTR UCTIONS FOR FUTURE USE GENERAL Your Vulcan-Hart Gas Fryer is produced with quality workmanship and material. Proper installation, usage and maintenance will result in many years of satisfactory performance. It is suggested that you thoroug ...

  • Vulcan-Hart EF5 ML-114944 - page 4

    — 4 — LOCATION The equipment area must be kept free and clear of combustible substances. Minimum clearance from combustible construction is 6" (152.4mm) from the sides and 6" (152.4mm) from the back of the fryer; minimum clearance from non-combustible construction is 0" from the sides and back of the fryer. There must be at least ...

  • Vulcan-Hart EF5 ML-114944 - page 5

    — 5 — Fig. 1 GAS CONNECTIONS All gas supply connections and any pipe joint compound must be resistant to the action of liquefied petroleum gases. The gas inlet is located at the lower left rear. Codes require that a gas shutoff valve be installed in the gas line ahead of the fryer. The gas supply line must be at least the equivalent of 1 / 2 &q ...

  • Vulcan-Hart EF5 ML-114944 - page 6

    — 6 — LEVELING THE FRYER Once gas connections have been made, place a spirit level on top of the fryer. Adjust the legs to ensure that the fryer is level front-to-back and side-to-side in the final installed position. FLUE CONNECTIONS Adequate ventilation must be provided and must comply with NFPA Standard #96 (latest edition), and with local c ...

  • Vulcan-Hart EF5 ML-114944 - page 7

    — 7 — OPERA TION WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT OIL CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL OIL FROM THE TANK. Tank warranty may be voided by improper operation. Turn gas valve off when draining or filling. FILL FRY TANK WITH LIQ ...

  • Vulcan-Hart EF5 ML-114944 - page 8

    — 8 — PL-40677-1 Drain V alve Gas Control V alve Knob Thermostat Knob LIGHTING THE PILOT 1. Turn thermostat OFF. Thermostat is located behind the door (Fig. 3). MODEL EF3 Fig. 3 2. Push gas control valve knob and turn to OFF (Fig. 4). Wait 5 minutes for unburned gas to vent. 3. Push and turn gas control valve to the "I" in PILOT (Fig. ...

  • Vulcan-Hart EF5 ML-114944 - page 9

    — 9 — TURNING THE FRYER OFF 1. Turn the thermostat OFF. 2. Turn the gas control valve knob so the "I" in PILOT is opposite the INDEX. In this position, the pilot remains lit. 3. To shut off all gas to the system, including the pilot, turn the gas control valve knob to OFF. EXTENDED SHUTDOWN 1. Turn the manual gas shutoff valve OFF. 2. ...

  • Vulcan-Hart EF5 ML-114944 - page 10

    — 10 — SHORTENING LIFE Shortening life may be extended by following these guidelines: • Do not salt foods over the fryer. • Use good quality shortening. • Filter shortening at least daily. • Replace shortening if it becomes poorly flavored. • Keep equipment and surroundings clean. • Set thermostats correctly. • Remove excess moist ...

  • Vulcan-Hart EF5 ML-114944 - page 11

    — 11 — 7. With a small amount of warm shortening, flush out scraps and sediment in the fry tank. Drain the tank thoroughly and wipe clean. 8. If it is necessary to clean the tank more thoroughly follow the procedure shown in CLEANING — WEEKLY OR AS REQUIRED. 9. Close the drain valve. 10. Pour the strained shortening back into the vat. 11. Add ...

  • Vulcan-Hart EF5 ML-114944 - page 12

    — 12 — MAINTENANCE WARNING: HOT OIL AND PARTS CAN CAUSE BURNS. USE CARE WHEN OPERATING, CLEANING AND SERVICING THE FRYER. WARNING: SPILLING HOT OIL CAN CAUSE SEVERE BURNS. DO NOT MOVE FRYER WITHOUT DRAINING ALL OIL FROM THE TANK. VENT Annually, when fryer is cool, check the flue and clear any obstructions. SERVICE AND PARTS INFORMATION To obtai ...

Manufacturer Vulcan-Hart Category Fryer

Documents that we receive from a manufacturer of a Vulcan-Hart EF5 ML-114944 can be divided into several groups. They are, among others:
- Vulcan-Hart technical drawings
- EF5 ML-114944 manuals
- Vulcan-Hart product data sheets
- information booklets
- or energy labels Vulcan-Hart EF5 ML-114944
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vulcan-Hart EF5 ML-114944.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vulcan-Hart EF5 ML-114944, service manual, brief instructions and user manuals Vulcan-Hart EF5 ML-114944. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vulcan-Hart EF5 ML-114944.

Similar manuals

A complete manual for the device Vulcan-Hart EF5 ML-114944, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vulcan-Hart EF5 ML-114944 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vulcan-Hart EF5 ML-114944.

A complete Vulcan-Hart manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vulcan-Hart EF5 ML-114944 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vulcan-Hart EF5 ML-114944, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vulcan-Hart EF5 ML-114944, that we can find in the current document
3. Tips how to use the basic functions of the device Vulcan-Hart EF5 ML-114944 - which should help us in our first steps of using Vulcan-Hart EF5 ML-114944
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vulcan-Hart EF5 ML-114944
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vulcan-Hart EF5 ML-114944 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vulcan-Hart EF5 ML-114944?

Use the form below

If you did not solve your problem by using a manual Vulcan-Hart EF5 ML-114944, ask a question using the form below. If a user had a similar problem with Vulcan-Hart EF5 ML-114944 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)