Manual Craftsman 358.794941

13 pages 0.7 mb
Download

Go to site of 13

Summary
  • Craftsman 358.794941 - page 1

    Instruction Manual I CRAFTSMAN°I 25cc/1.5 cu.in. 2-Cycle 200 MPH/400 CFM GASOLINE POWERED BLOWER/VAC Model No. 358.794941 • Safety • Assembly • Operation • Maintenance • Parts List • Espar_ol WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product. For answers to your questions about this p ...

  • Craftsman 358.794941 - page 2

    Warranty Statement 2 Troubleshooting Table 11 Safety Rules 2 Emissions Statement 12 Assembly 4 Parts List 14 Operation 6 Spanish 17 Maintenance 9 Parts and Ordering Back Storage 11 FULL TWO YEAR WARRANTY ON CRAFTSMAN® GAS BLOWER For two (2) years from date of purchase, when this Gas Blower is maintained, lubricated, and tuned up according to the i ...

  • Craftsman 358.794941 - page 3

    • Do not operate unit when you are tired, ill, upset, or if you are under the influence of alcohol, drugs, or medi- cation. • Keep children, bystanders, and ani- mals away from work area a mini- mum of 30 feet (10 meters) when starting or operating unit. Do not point blower nozzle in the direction of people or pets. HANDLE FUEL WITH CAUTION, IT ...

  • Craftsman 358.794941 - page 4

    • Empty fuel tank before storing the unit. Use up fuel left in carburetor by starting engine and letting it run until it stops. • Do not use any accessory or attach- ment other than those recommended by manufacturer for use with your unit. • Do not store the unit or fuel in a closed area where fuel vapors can reach sparks or an open flame fro ...

  • Craftsman 358.794941 - page 5

    2. Secure the tube by turning the knob clockwise. 3. To remove the tube, turn the knob counterclockwise to loosen the tube; remove the tube. VACUUM ASSEMBLY VACUUM BAG ASSEMBLY 1. Open tile zipper on the vacuum bag and insert the elbow tube. 2. Push the small end of the elbow tube through the small opening in the bag. Elbow Tube Small Opening i, Zi ...

  • Craftsman 358.794941 - page 6

    3. Remove the vacuum bag. 4= Close the vacuum inlet cover and make sure it is latched closed. 5= Reinstallthe blowertube (see BLOWER TUBE ASSEMBLY). SHOULDER STRAP ADJUSTMENT (for vacuum use only) 1. Hold the unit as shown with the muffler side facing away from your body and clothes. 2= Pass the shoulder strap over your head and onto your right sho ...

  • Craftsman 358.794941 - page 7

    CHOKE LEVER The CHOKE helps to supply fuel to the engine to aid in cold starting. Activate the choke by moving the choke lever to the FULL CHOKE position. After engine OPERATING TIPS • While vacuuming or blowing debris, hold the unit with the muffler side fac- ing away from your body and clothes (see OPERATING POSITION below). • To reduce the r ...

  • Craftsman 358.794941 - page 8

    To avoid engine problems, empty the fuel system before storage for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur. Fuel stabilizer is an acceptable alter- n ...

  • Craftsman 358.794941 - page 9

    1. Move the throttle lever to the position. 2. Pull the starter handle sharply until the engine starts, but no more than 5 pulis. NOTE" If the engine has not started, pull starter handle sharply for 5 more pulls. If engine still does not run, it is probably flooded. Proceed to START- ING A FLOODED ENGINE. 3. To stop the engine, move the thrott ...

  • Craftsman 358.794941 - page 10

    CLEAN AIR FILTER _" / Air Filter _ Air Filter Cover Screws A dirty air filter decreases engine per- formance and increases fuel consump- tion and harmful emissions. Always clean after every 5 hours of operation. Cleaning the air filter: 1. Clean the cover and the area around it to keep debris from falling into the carburetor chamber when the c ...

  • Craftsman 358.794941 - page 11

    A dBi WARNING: Perform the following steps after each use: • Allow engine to cool, and secure the unit before storing or transporting. • Store unit and fuel in a well venti- lated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. • Store unit with all guards in place. Pos ...

  • Craftsman 358.794941 - page 12

    TROUBLESHOOTING TABLE (continued) TROUBLE Engh_e will not accelerate, lacks power, or dies under a load. Engine smokes excessively. Engine runs hot. CAUSE 1. Air filter dirty. 2. Fuel not reaching carburetor. 3. Spark plug fouted. 4. Carburetor requires 4. adjustment. 5. Carbon build up. 5. 6. Compression low. 6. 1. Choke partially on. 1. 2. Fuel m ...

  • Craftsman 358.794941 - page 13

    off-road engine is purchased. LENGTH OF COVERAGE: This warranty shall be for a period of two years from the initial date of purchase. WHAT IS COV- ERED: REPAIR OR REPLACEMENT OF PARTS. Repair or replacement of any warranted part will be performed at no charge to the owner at an approved Sears Service Center. If you have any questions regarding your ...

Manufacturer Craftsman Category Blower

Documents that we receive from a manufacturer of a Craftsman 358.794941 can be divided into several groups. They are, among others:
- Craftsman technical drawings
- 358.794941 manuals
- Craftsman product data sheets
- information booklets
- or energy labels Craftsman 358.794941
All of them are important, but the most important information from the point of view of use of the device are in the user manual Craftsman 358.794941.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Craftsman 358.794941, service manual, brief instructions and user manuals Craftsman 358.794941. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Craftsman 358.794941.

Similar manuals

A complete manual for the device Craftsman 358.794941, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Craftsman 358.794941 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Craftsman 358.794941.

A complete Craftsman manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Craftsman 358.794941 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Craftsman 358.794941, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Craftsman 358.794941, that we can find in the current document
3. Tips how to use the basic functions of the device Craftsman 358.794941 - which should help us in our first steps of using Craftsman 358.794941
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Craftsman 358.794941
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Craftsman 358.794941 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Craftsman 358.794941?

Use the form below

If you did not solve your problem by using a manual Craftsman 358.794941, ask a question using the form below. If a user had a similar problem with Craftsman 358.794941 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)