English dropdown-ico

Manual Barco SLM R12+

159 pages 5.4 mb
Download

Go to site of 159

Summary
  • Barco SLM R12+ - page 1

    SLM R1 2+ Owner’s manual R9010171 R5976654/05 27/01/2005 ...

  • Barco SLM R12+ - page 2

    Barco nv Eve nts Noordl aan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: events@barco.com Visit us at the web: www.barco.com P r i n t e di nB e l g i u m ...

  • Barco SLM R12+ - page 3

    Changes Barco provides this manual ’as is’ without warranty of any kind, either ex pressed or implied, including but not limited to the i mplied war- ranties or merchantability and fitness for a particular purpose. Ba rco m ay make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any time with ...

  • Barco SLM R12+ - page 4

    ...

  • Barco SLM R12+ - page 5

    Table of con tents T ABLE OF CONTENTS 1 . S a f e t y I n s t r u c t i o n s .................................................................................................. 5 1 . 1 W a r n i n g s .............................. .................................. .................................. ...................... ....... 5 1 . 2 F C C s t ...

  • Barco SLM R12+ - page 6

    Table of con tents 6 . 2 P a s s w o r d ...................... ............... .................. ............... ................... ........................... ......... 5 9 6.3 Menus on Local LC D Display . . . . ....................... ............... ................... ............... .................. .......... 6 0 7. Random Access Adjust ...

  • Barco SLM R12+ - page 7

    Table of con tents 9 . S e r v i c e M o d e...................................................................................................... 1 0 9 9 . 1 B u i l t - u p ................ ................... .................................. ................................. ....................... .1 0 9 9 . 2 S t a r t u p ..... ............ ...

  • Barco SLM R12+ - page 8

    Table of con tents 4 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 9

    1. Safety Inst ructions 1. SAFETY INSTRUCTIONS 1.1 W arnings T o prevent personnel injury The customer should never attempt to disassemble the lamp c asing or to dispose of the lamp casi ng other than by returning it to BARCO. T o prevent injuries and physical da mage, always read this m anual and all labels on the system before connecting to the w ...

  • Barco SLM R12+ - page 10

    1. Safety Instruction s Extra Safety manual Read also safety instructions in separate manual ( R597 6125 ). 6 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 11

    2. Packaging and Di mensions 2. P ACKAGING AND DIMENSIONS Overview • Projector Packaging • Box Content • Lamp Packaging • Lens Packaging • Projector Dimensions 2.1 Projector Packag ing W ay of Packaging The projector is packed in a carton box. T o provide p rotection du ring transportation, the projector is surrounded with foam. The packa ...

  • Barco SLM R12+ - page 12

    2. Packaging a nd Dimension s Save this carton box , it can be used to repack the lamp when yo u ever have to transport your projector . 2.4 Lens Packaging W ay of Packaging Lenses are supplied as a n individual item. They are packed in a carton. 2.5 Projector Dimensions Overview • Projector Dimensions • Projector Dimensions (Inclusive Dust Fil ...

  • Barco SLM R12+ - page 13

    2. Packaging and Di mensions Image 2-3 Side view di mensions 2.5.2 Projector Dimens ions (Inclusive Dust Fi lters) Projector Front V iew The value of the projector dimensions is indicated in mm. Conversion to inches: 24.5 mm = 1 mm Air OU T IR-receiver Image 2-4 Projector front vie w dimensions Projector T op View The value of the projector dimensi ...

  • Barco SLM R12+ - page 14

    2. Packaging a nd Dimension s Image 2-5 Projector top vie w dimensions Projector Side V iew The value of the projector dimensions is indicated in mm. Conversion to inches: 24.5 mm = 1 mm Image 2-6 Projector side view dim ensions 10 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 15

    3. Installation Gu idelines 3. INST ALLA TION GUIDELINES The engines are non sealed versions. 3.1 General W ARNING : Before installing t he projector , read first the safety instru ctions. Ambient T emperature Conditions. Careful consideration of things such as image size, ambient light le vel, projector placement and type of screen to use are crit ...

  • Barco SLM R12+ - page 16

    3. Installa tion Guide lines Screens are rated by how much light they reflect (or transmit i n the case of rear projection systems) given a determined amount of light projected toward them. Th e ‘GAIN’ of a screen is the te rm used. Front and rear screens are both rated in terms of gain. The gain of screens range from a white matte screen with ...

  • Barco SLM R12+ - page 17

    3. Installation Gu idelines T able mounted, front projection, second way . Screen PD B Floor Projector CD SH Optical axis projection lens SH SW SIDE VIEW BACK VIEW Screen TOP VIEW SW Floor Table/Top side facing floor A CD = SH/2 + B + A - 554mm Image 3-2 T able mounted con figuratio n up side down Ceiling mounted, fron t projection Screen PD B Ceil ...

  • Barco SLM R12+ - page 18

    3. Installa tion Guide lines Ceiling mounted, front projection, second way . Screen PD B Ceiling Projector CD SH Optical axis projection lens SH SW SIDE VIEW BACK VIEW Screen CEILING VIEW SW Ceiling Ceiling/Top side facing ceiling A CD = SH/2 + B + A - 554mm Image 3-4 Ceiling mounted p rojector 3.3 Safety Area around projector Safety area Make sure ...

  • Barco SLM R12+ - page 19

    3. Installation Gu idelines A Image 3-5 Safety a rea around the proj ector R5976654 SLM R12+ 27/01/200 5 15 ...

  • Barco SLM R12+ - page 20

    3. Installa tion Guide lines 3.4 Projector tilting T urning around the projection axes (E) FRONT VIEW (D)Lamp Axis 15 ° 15 ° (C) Start point Image 3-6 Tilting diagram A Allowed Projector Tilting Area B Forbidden Projector Tilting Area C Start point D Lamp axis EF r o n t v i e w Consider the starting point at the lamp side (input side), the follo ...

  • Barco SLM R12+ - page 21

    3. Installation Gu idelines 3.5.1 Access to the Lamp Unit. What has to be done T o access the lamp casing, a side panel has to be removed. Necessary t ools A flatblade screwdri ver of 5 mm R e m o v i n gt h es i d ep a n e l 1. Turn with a screwdriver the side panel lock screw (A) a quarter turn counter clockwise. A Image 3-7 Unlocking the s ide c ...

  • Barco SLM R12+ - page 22

    3. Installa tion Guide lines Installin g the lam p unit 1. Remo ve the lock nut (B) on the 3 spacer screws (A). B A Image 3-9 2. Line up the lamp unit guides (A) with the guides on the projector base (B) and push the unit into the frame until it fits. B A Image 3- 10 Lamp unit mounting 3. Secure the po sition of the lamp unit with the 3 spacer scre ...

  • Barco SLM R12+ - page 23

    3. Installation Gu idelines A A A Image 3-1 1 Lamp unit fixation 3.5.3 Reinstal ling the Side Panel What has to be done After the new lamp unit has been installed, the side panel has to be remounted. Necessary t ools A flatblade screwdri ver of 5 mm Reinstall ing the side panel 1. Move th e cover guides under the back cover and push the front o f t ...

  • Barco SLM R12+ - page 24

    3. Installa tion Guide lines B Image 3- 14 Locking side panel 3.6 Realignment of the lamp in its reflector W ARNING : As the p rojector has to be open ed, this procedure h as to be pe rformed by qu alified service te ch- nician. Why With higher run times, the light output of the lamp will decrease, which results in a lower light output on the scree ...

  • Barco SLM R12+ - page 25

    3. Installation Gu idelines Image 3- 15 Lamp adjustment access 3. Start up the adjustment mode and select Service . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 3-2 4. Select Lamp. The Z-axis value indicati on (lamp menu in service mode) will be h ...

  • Barco SLM R12+ - page 26

    3. Installa tion Guide lines A Image 3-16 Lamp Z-Axis alignment (For mer lamp house) B A Image 3-17 Lamp Z-Axis alig nment (Universal lamp h ouse) 6. Slowly turn the screw B (image 3-16, , image 3-17, using an Alle nk e yo f3m m ,al i t t l ec l o c k w i s eu n t i lt h em a x i m u mv a l u eo ft h e Z-AXIS indication in the lamp menu is reached. ...

  • Barco SLM R12+ - page 27

    3. Installation Gu idelines 3.7 Lenses Overview • Lenses • Lens selection • Lens formulas • Lens Installation • Cleaning the lens 3.7.1 Lenses A vailable lenses TLD(1.6–2.0:1) R9840670 TLD(2.0–2.8:1) R9840680 TLD(2.8–5.0:1) R9840690 TLD(1.2:1) R9840770 TLD(0.8:1) R9840900 TLD(5.0–8.0:1) R9840910 TLD HB(0.8:1) R9842040 TLD HB(1.6? ...

  • Barco SLM R12+ - page 28

    3. Installa tion Guide lines Formulas for TLD lenses Metric form ulas (meter) Inch formulas (inch) TLD(0.8:1) PD=0.77xSW+0.05 PD=0.77SW+1.97 TLD(1.2:1) PD=1.1 1xSW-0.01 PD=1.1 1xSW-0.39 TLD(1.6–2.0:1) PD min =1.47xSW-0.09 PD max =1.85xSW-0.13 PD min =1.47xSW -3.54 PD max =1.85xSW-5.12 TLD(2.0–2.8:1) PD min =1.85xSW-0.17 PD max =2.62xSW-0.24 PD ...

  • Barco SLM R12+ - page 29

    3. Installation Gu idelines Image 3- 19 Mounted Lens Caution: On a table mounted projector , hold the projector when pushing the lens into the lens block to avoid sliding off from the table. 3.7.5 Cleaning the lens T o minimize the possibility of damagi ng the optical coating or scratching exp osed lens surface, we have de- veloped recommend ations ...

  • Barco SLM R12+ - page 30

    3. Installa tion Guide lines 1 2 A B Image 3- 20 Battery cover re moval 2. Plug in t he battery (9 V battery - typ e E-block or equivalent) onto the battery contact plate (A). A B Image 3- 21 Battery connect ion 3. Place the bat tery into the lower compartment (B) (image 3-21). 4. Insert the pins of the battery cover (A) into the slots on the botto ...

  • Barco SLM R12+ - page 31

    3. Installation Gu idelines 3.9 Stacking Projectors What is possible? Up to 3 projectors can be stacked on each other without using extra tools or accessories. How to stack? Handle as follow: 1. Put the second pro jector on the first one so that base plate of t he second projector matches with the rigging socket of the first projector . Image 3- 23 ...

  • Barco SLM R12+ - page 32

    3. Installa tion Guide lines A Image 3- 25 Mounting the secur ity chain 5. G uide hook and cable around the carry handle and guide it around the carry handle of the upper projector . Image 3- 26 Mounting the securit y hook 6. Hoo k it in the foreseen hole B in the base plate of th e upper projector . 28 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 33

    3. Installation Gu idelines C B B Image 3- 27 Mounting the security hook (deta il) How to open a secured rigging poi nt? 1. Push the ring (A) of the first projector downwards and hold it in that position. A B Image 3- 28 Opening t he rigging soc kets 2. Turn the locked part (B) of the second projecto r a q uarter counter clockwise and move it upwar ...

  • Barco SLM R12+ - page 34

    3. Installa tion Guide lines 3.10 Rigging points and Accessories Clamps Slots are made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this position matches with the rigging p oints. Consult a professional structural engineer prior to suspe nding th e ceiling mount from a structure not ...

  • Barco SLM R12+ - page 35

    3. Installation Gu idelines Image 3- 32 Opening t he rigging cl amp 2. Hoo k the clamp around the tube. The trigger automatically shuts the clamp. 3. Close the fixation handle and secure it by turning the hand screw . Image 3- 33 Closing th e rigging cla mp R5976654 SLM R12+ 27/01/200 5 31 ...

  • Barco SLM R12+ - page 36

    3. Installa tion Guide lines 32 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 37

    4. Connecti ons 4. CONNECTIONS Overview • Power connection • Switching on • Switching to standby • Switching off • Input Source Connections • Communication Connections 4.1 Power connection AC Power cord connection Use the supplied power cord to connect your pro jector to the wall outlet. Plug the female power connector into the male con ...

  • Barco SLM R12+ - page 38

    4. Connecti ons Lamp run time indica tion while run ning When the total run time of the lamp is 30 hours less then 1000, the following warning message will be displayed for 1 minute. This warning message will be repeated every 30 min utes. Pre ss EXIT to remove the message before the minute is over . Remaining Lamp run time 20h Image 4-2 When the t ...

  • Barco SLM R12+ - page 39

    4. Connecti ons 4.3 Switching to standby H o wt os w i t c ht os t a n d b y ? 1. Press Standby to switch the proje ctor to standby . 4.4 Switching off How to swi tch off the pro jector? 1. Press first Standby . 2. Let cool dow n the projector until the fans stop blowing, at least 15 min. 3. Switch off the projector with the power switch. 4.5 Input ...

  • Barco SLM R12+ - page 40

    4. Connecti ons slot 1 RGB/Component slot 2 Video slot 3 not used slot 4 not used When using a RCVDS05, it is recommended to use a 5-cable output module in the RCVDS. The outputs of this module has to be connected to slot 1 of the projector . T o switch the project or in the 5-cable mode see "Fixed slot (slot 1 & 2)", page 37. 4.5.3 I ...

  • Barco SLM R12+ - page 41

    4. Connecti ons 4.5.4 Fixed slot (slo t 1 & 2) Where to find? Slot 1 & 2 has 5 BNC input terminals for 5 cable input and a DVI plug for DVI input. Slot 1 has also an DVI output for loop through to a second projector . Within the installation mode it is po ssible to setup the input for 5 cable or DVI (PanelLink). Which signals can be conne c ...

  • Barco SLM R12+ - page 42

    4. Connecti ons 3. Press ENTER . 4. Press the cursor key ↑ or ↓ to select Input Slots . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS OSD INTERNAL PATTERNS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 4-5 5. Press ENTER . The inte ...

  • Barco SLM R12+ - page 43

    4. Connecti ons How to connect ? 1. Con nect the output of your SDI source to t he input BNC of the SDI input. OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote CTRL 1 Hardwired remote CTRL ...

  • Barco SLM R12+ - page 44

    4. Connecti ons OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote CTRL 1 Hardwired remote CTRL 2 Two way hardwired remote CTRL 3 On On On On DIGITAL VIDEO SOURCE Digital Video DVI INPU T DV ...

  • Barco SLM R12+ - page 45

    4. Connecti ons OUT IN On R9840450 HD SDI DIGI TAL MODULE P R P B On COMM PO RT Ethernet RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote CTRL 1 Hardwired remote CTRL 2 Two way hardwired remote CTRL 3 On On On On DVI INPUT DVI INPUT DVI OUTPUT High Bandwidth 5 CABLE INPUT High Bandwidth ...

  • Barco SLM R12+ - page 46

    4. Connecti ons 6. Push the c ursor key ↑ or ↓ to select the third or fourth slot. INPUT SLOTS Slot Module type [config] 1. RGB-SS [CV] 2. RGB-SOG 3. SDI 4. SDI ______________ 1. DVI OUTPUT [DVI input] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 4-9 7. Press EN TER to toggle. Possible indications on the input slot menu ...

  • Barco SLM R12+ - page 47

    4. Connecti ons 45678 9 123 45678 9 1 Pin Number Pin Number DB9 Female Connector DB9 Female Connector 23 Image 4-8 Make a Custom Null Modem Cable 2. Use the Custom Nu ll Modem Cable to connect the COM 800 port o f the master-projector to the ’T o Switcher ’ port on the frontside of the COM 800 Splitter . R5976654 SLM R12+ 27/01/200 5 43 ...

  • Barco SLM R12+ - page 48

    4. Connecti ons To next COMM 800 S p litte r COM 800 Splitter 1 (R9827941) Front Slave 1 TO SWITC HER COMM 800 Splitter To Slave 2 To Slave 3 Custom Null Modem Cable TO IR R ECEIVER Front Slave 4 To Slave 5 To Slave 6 TO SWITC HER COMM 800 Splitter TO IR R ECEIVER Back TO PRO J.1 TO PROJ.2 TO PRO J.3 TO PROJ.4 Back TO PRO J.1 TO PROJ.2 TO PROJ.3 TO ...

  • Barco SLM R12+ - page 49

    4. Connecti ons 4.6.3 Communication wi th peripheral s What is possible wit h an R CVDS05 connected. • Up to 20 inputs with the RCVDS 05 and 90 inputs when RCVDS’s are linked via the expansion module. • Serial communication with the projector . • Remote control buttons on the RCVDS to control the projector (source selection and analog setti ...

  • Barco SLM R12+ - page 50

    4. Connecti ons OUT IN On R9840450 HD SDI DIGITAL MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT TRIGGER OUT RS232/422 OUT RS232/422 IN IR-Receiver Diagnostic Code Green Operation Red Stand-by IR Sync OK Hardwired remote CTRL 1 Hardwired remote CTRL 2 Two way hardwired remote CTRL 3 On On On On DVI INPU T DVI INPU T DVI OUTPUT High Bandwidth ...

  • Barco SLM R12+ - page 51

    5. Getting Started 5. GETTING ST ARTED 5.1 RCU & Local keypad How controlling t he projector ? The projector can be controlled by the local keypad or by the remote control unit. Location of the loca l keypad ? The local keypad is located on the input side of the projector . Remote control funct ions. This remote control includes a ba ttery powe ...

  • Barco SLM R12+ - page 52

    5. Getting Star ted 1 Barco key selection key , to get direct access to the lens adjustment menus. 2 ADJ ADJUST key , to enter or exit the adjustment mode. 3 Address key (recessed key), to enter the address of the projector (between 0 and 9). Press the recessed address key with a pencil, followed by pressing one digit button between 0a n d9 . 4 STD ...

  • Barco SLM R12+ - page 53

    5. Getting Started The projector mode indication lamp will be green - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 ENTER 32a PAUSE - + PHASE FREEZ TEXT EXIT ADJ STBY SHARPNESS TINT COLOR BRIGHTNESS CONTRAST HELP ? COLOR PHASE SHARPN TINT BRIGHTN STANDBY ENTER TEXT EXIT PAUSE 2 1 4 3 5 6 8 0 9 7 CONTRAST A Image 5-2 Or , Press a digit button to select an i ...

  • Barco SLM R12+ - page 54

    5. Getting Star ted ERROR DMD out of operating temperature range Automatic shutdown is activated Menu 5-1 5.4 Quick Set Up A djustments Overview • Quick Language Change • Quick Lens Adjustment • Quick On Screen Color change 5.4.1 Quick Language Change What can be done? Only if different on screen languages are avai lable, these can be changed ...

  • Barco SLM R12+ - page 55

    5. Getting Started 6. Push the c ursor key ↑ or ↓ to highlight the desired language. CHANGE LANGUAGE ENGLISH Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 5-4 Note: For the moment, only English is available. 5.4.2 Quick Lens Adjustme nt Quick zoom/focus adj ustment 1. Press the Selection key * , Barco key . The zoom/focu ...

  • Barco SLM R12+ - page 56

    5. Getting Star ted Press the selection key * to switch to a nother pattern. D ifferent patterns are available. 5.4.3 Quick On Screen Color cha nge What can be done ? For quick change of the on-screen color of the highlighted items. The highlighted items on the menus can be displayed in red, green or yellow . How to change ? 1. Press ENTER to start ...

  • Barco SLM R12+ - page 57

    5. Getting Started 5.5 Using the RCU Pointing to the ref lective scr een 1. Point the front of the RCU to the reflective screen surface. Ceiling Screen IR sensor RCU Image 5-5 Hardwired Remote I nput 1. Plug one end of the remote cable in the connector on the bottom of the RCU. 2. Plug the other end in the connector in the front panel of the projec ...

  • Barco SLM R12+ - page 58

    5. Getting Star ted Hardwired to the XLR input 1. Plug one end of the remote cable in the connector on the bottom of the RCU 2. Plug the other end in the connector in the fro nt panel of the projector labelled Hardwired CTRL2 . OUT IN On R9840450 HD SDI DIGITA L MODULE OUT IN On 9840110 SDI DIGITAL INPUT COMM PORT 10/(100) BASE-T RS232/422 OUT RS23 ...

  • Barco SLM R12+ - page 59

    5. Getting Started ADDR ADJ EX IT STBY MUTE TEXT BRIGHTNESS - + - + - + - + SHARPNES S - + TINT COLOR CONTRAST FREEZ 0 9 7 8 6 5 4 3 2 1 ENTER RCU Front of projector IR sensor ADDR ADJ EX IT STBY MUTE TEXT BRIGHTNESS - + - + - + - + SHARPNES S - + TINT COLOR CONTRAST FREEZ 0 9 7 8 6 5 4 3 2 1 ENTER RCU Rear of projector IR sensor Table 45ø 45ø 45 ...

  • Barco SLM R12+ - page 60

    5. Getting Star ted 5.6.2 Displaying and Pro gramming addresses Displaying the P rojector Address o n the Screen. 1. Press Add ress key (recessed key on the RCU) with a pencil. The projector ’s address will be displayed in a ’T ext box’ T o continue usin g the RCU with that sp ecific address, it is necessary to enter the sam e address with th ...

  • Barco SLM R12+ - page 61

    5. Getting Started The Stand-by Ke y When the Stand-by key is pressed, the image projection is stopped and the projector goes to stand-by . This situation is used when a projection stop is planned for a longer period. R5976654 SLM R12+ 27/01/200 5 57 ...

  • Barco SLM R12+ - page 62

    5. Getting Star ted 58 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 63

    6. St art up of the Adju stment mode 6 . S T A R TU PO FT H EA D J U S T M E N TM O D E 6.1 Start up Possible paths There are 3 possible paths to follow once in the Adjustment mode. They are : • Installation - Installation should be selected if a new input modu le is installed or a new source is connected to an existing input module. Also when th ...

  • Barco SLM R12+ - page 64

    6. St art up of the Adj ustment mode When your password is correct, you gain access to the selected item. When your password is wrong. The error message Inva lid passw ord is displayed on the screen. Press EXIT to con tinue and to return to the adjustment menu. F a c t o r yp r o g r a m m e dp a s s w o r d: 0000 Password remark When re-entering t ...

  • Barco SLM R12+ - page 65

    7. Rand om Access Adjustment Mode 7. RANDOM ACCESS ADJUSTMENT MODE Overview • Overview Flow •P i c t u r e S e r v i c e s • Picture T uning • Geometry • ScenergiX • Picture in Picture (PiP) • Save Changes 7.1 Overview Flow Overview RANDOM ACCES ADJUSTMENT MODE PICTURE TUNING COLOR TEMPERATURE GAMMA COLOR SPACE NOISE REDUCTION INPUT B ...

  • Barco SLM R12+ - page 66

    7. Rand om Access Adjustment Mode Start up 1. Push the cursor key ↑ or ↓ to highlight Rando m Access . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-1 2. Press ENTER . RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY SCENERG ...

  • Barco SLM R12+ - page 67

    7. Rand om Access Adjustment Mode file loading can be done automatically (see "File Option s", page 71). Files with a ~ in front of the file name are temporary files. These files will be deleted when switching to anoth er source. Possible file Manip ulations The following file manipulations are possible : • Load : installation of a file ...

  • Barco SLM R12+ - page 68

    7. Rand om Access Adjustment Mode The Load menu displays the corresponding files depending on the installed filter . LOAD FILE FILTER LIST [All] F ilename Src resolution video525.s01 1 675x240i video525.c01 1 675x240i video525.c02 1 675x240i ---------------------------- Active file : Video525.c50 Select with ↑ or ↓ , → <ENTER> to accept ...

  • Barco SLM R12+ - page 69

    7. Rand om Access Adjustment Mode 7.2.5 Edit File 7.2.5.1 St art up How to start up the Edi t menu ? T o start up the ED IT menu : 1. Push the c ursor key ↑ or ↓ to highlight Edit . FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-9 2. Press EN TER to select. The Edit file ...

  • Barco SLM R12+ - page 70

    7. Rand om Access Adjustment Mode 3. Enter directly with the nu meric keys on the RCU or local keypad the new value. How to change a setting wi th the cursor keys? 1. Push the c ursor key ↑ or ↓ to highlight an item. The color of the selected item will change. 2. Press EN TER to activate the digits. 3. Push the c ursor key ← or → to select ...

  • Barco SLM R12+ - page 71

    7. Rand om Access Adjustment Mode How to install the cor rect settings for the options in t he Edit file menu. EDIT FILE OPTIONS Source number 1 Clamp position [leading] Clamp delay 0 Clamp width 10 Field polarity [pos] Field select [both] Vertical refresh [sync] Film Mode Detection [on] Banner Protect [on] Select with ↑ or ↓ <ENTER> to t ...

  • Barco SLM R12+ - page 72

    7. Rand om Access Adjustment Mode Film mode detection: [On] or [Off] Detects in the [on] mode if the source is film or video. Use the ENTER key to toggle between [on] or [off] When enabled, the hardware looks for tell-tale signs of 3:2 or 2:2 pull-down sequ ences. These are the result of converting cinema materia l recorded at 24 frames-per-second ...

  • Barco SLM R12+ - page 73

    7. Rand om Access Adjustment Mode The Rename selection menu will be displayed. RENAME FILE F ilename Src resolution video525.s01 1 675x240i video525.c01 1 675x240i video525.c02 1 675x240i ------------------------------- Active file : Video525.c50 Select with ↑ or ↓ , → <ENTER> to accept <EXIT> to return Menu 7-14 3. Push the curso ...

  • Barco SLM R12+ - page 74

    7. Rand om Access Adjustment Mode The Copy selection menu will be displayed. COPY FILE F ilename Src resolution video525.s01 1 675x240i video525.c01 1 675x240i video525.c02 1 675x240i ------------------------------- Active file : Video525.c50 Select with ↑ or ↓ , → <ENTER> to accept <EXIT> to return Menu 7-17 3. Push the cursor ke ...

  • Barco SLM R12+ - page 75

    7. Rand om Access Adjustment Mode 7.2.8 Delet e Start up and delete T o delete a selected file out of the list of files : 1. Push the c ursor key ↑ or ↓ to highlight Delete . FILE SERVICE LOAD EDIT RENAME COPY DELETE OPTIONS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-20 2. Press ENTER . The delete selection menu wil ...

  • Barco SLM R12+ - page 76

    7. Rand om Access Adjustment Mode 2. Press ENTER . The option selection menu will be displayed. FILE OPTIONS FILE SORT [NAME] FILE LOAD [AUTOMATIC] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-24 File Sort 1. Press ENTER to tog gle between [name] and [index]. - [name] : t he files in the list will be sorted on the file na ...

  • Barco SLM R12+ - page 77

    7. Rand om Access Adjustment Mode 7.3.2 Color T emperature A vailable Color temperatures • Projector white • Broadcast 3200K • Film 5400K • Video 6500K • Computer 9300K • Custom balance Start Up 1. Push the c ursor key ↑ or ↓ to highlight Color T empe rature . PICTURE TUNING COLOR TEMPERATURE GAMMA COLOR SPACE NOISE REDUCTION INPUT ...

  • Barco SLM R12+ - page 78

    7. Rand om Access Adjustment Mode Changing the gamma val ue 1. Push the c ursor key ↑ or ↓ to highlight Gamma . PICTURE TUNING COLOR TEMPERATURE GAMMA COLOR SPACE NOISE REDUCTION INPUT BALANCE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-29 2. Press EN TER to select. 3. Cha nge the gamma value by pushing the cursor ke ...

  • Barco SLM R12+ - page 79

    7. Rand om Access Adjustment Mode Projector Maximum color space EBU European Broadcasting Union. This organization defines a European standard. SMPTE American standard Custom The use can define the x and y coordinates for red, g reen and blue which forms the corners of the color space. By changing t he coordinates, the color reproduction can be cha ...

  • Barco SLM R12+ - page 80

    7. Rand om Access Adjustment Mode 7.3.6.1 Input Balance for RGB input signals Step to be taken for RGB i nput signals T o adjust the input balance, the following steps have to be executed in the following order : 1. Start with the black balance. 2. Continue with the white balance . The default values are n ormally loaded whe n selecting a source. I ...

  • Barco SLM R12+ - page 81

    7. Rand om Access Adjustment Mode 4. Adjust th e contrast to a maximum value until the green noise becomes visible in the white areas and return one step. 5. Adjust with the cursor keys ↑ or ↓ or ← or → until the red respectively blue noise becomes visible in t he white areas and return one step. 7.3.6.2 Input Balance for YUV signals Steps ...

  • Barco SLM R12+ - page 82

    7. Rand om Access Adjustment Mode 7.3.6.3 Returning to the factory defa ults How to return to the fact ory defaults 1. Push the c ursor key ↑ or ↓ to highlight Default . INPUT BALANCE BLACK BALANCE WHITE BALANCE DEFAULT Select with ↑ or ↓ then <ENTER> <EXIT> to return Adjust red with ↑ or ↓ blue with ← or → Menu 7-38 2. ...

  • Barco SLM R12+ - page 83

    7. Rand om Access Adjustment Mode 7.4.2 Geometry start up Start up 1. Push the curso r key ↑ or ↓ to highlight Geometry . ADJUSTMENT MODE Select a path from below : RANDOM ACCESS INSTALLATION SERVICE Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-39 2. Press EN TER to select. The geometry menu will be displayed. GEOMETR ...

  • Barco SLM R12+ - page 84

    7. Rand om Access Adjustment Mode How to sh ift the ima ge ? 1. Push the c ursor key ↑ or ↓ to highlight Shift . GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPECT RATIO [4:3] OPTIONS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-41 2. Press EN TER to select. 3. Push th e cursor key ↑ or ↓ to shift the image in a ve ...

  • Barco SLM R12+ - page 85

    7. Rand om Access Adjustment Mode B V ertical size adjustment Size adjustment 1. Push the c ursor key ↑ or ↓ to highlight Size . GEOMETRY SHIFT SIZE SIDE KEYSTONE BLANKING ASPECT RATIO [4:3] OPTIONS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-42 2. Press EN TER to select. 3. Push th e cursor key ↑ or ↓ to size th ...

  • Barco SLM R12+ - page 86

    7. Rand om Access Adjustment Mode While the bar scale w indow is on the screen, press ENTER to change the value indication to an input field. Enter the desired value w ith the numeric keys on the RCU. Alw ays 3 digits should be entered . T o toggle + to - or vice versa, use the up or down arro w key . 7.4.6 Blanki ng What can be done ? Blanking adj ...

  • Barco SLM R12+ - page 87

    7. Rand om Access Adjustment Mode 2. Press ENTER to display the blanking menu. BLANKING TOP BOTTOM LEFT RIGHT Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-45 3. Push the c ursor key ↑ or ↓ to highlight the desired blanking. 4. Press ENTER t o start up the chosen blanking. 5. Use the cursor keys to adjust the blanking. ...

  • Barco SLM R12+ - page 88

    7. Rand om Access Adjustment Mode The Geometry Options menu will be displayed. GEOMETRY OPTIONS Use the same side keystone correction for all files ? [YES] <ENTER> to toggle <EXIT> to return Menu 7-48 3. Press ENTER to to ggle between [YES] or [NO]. NO Side Keystone will be adjusted for the active file only . YES Side Keystone will be a ...

  • Barco SLM R12+ - page 89

    7. Rand om Access Adjustment Mode Image 7-8 Why Soft Edge? What is the Basic Principal of Scene rgiX ? The principle of edge blending is archived by linear modulation of the light output in the overlap zo ne so that the light output in that zone equals the light output of the rest of the image. Adjustable overlapping area 50% 100% 50% 100% image 2 ...

  • Barco SLM R12+ - page 90

    7. Rand om Access Adjustment Mode 2. Press EN TER to select. 3. Push the c ursor key ↑ or ↓ to highlight Status . SCENERGIX STATUS [ON] - size - TOP BOTTOM LEFT RIGHT - black level - LEVEL Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-50 4. Press ENTER t o toggle between ON and OFF . ON scenergix is active OFF scenergi ...

  • Barco SLM R12+ - page 91

    7. Rand om Access Adjustment Mode Example Horizontal resolution source : 1600 pixels horizontal resolution projector 1 & 2 : 1024 pixe ls Overlap : 100 pixels T otal horizontal scree n size in pixels : 1948 pixels Pact projector 1 = [(1024 / 1948)] x 16 00 = 841 pixels Pact projector 2 = [(1024 / 1948)] x 16 00 = 841 pixels Pstart projector 2 = ...

  • Barco SLM R12+ - page 92

    7. Rand om Access Adjustment Mode Lstart projector 2 = Lstart projector 1 + (1200 – 620) 7.5.7 ScenergiX size adjustment What can be done with the ScenergiX size menu? Within this menu the width of the blending zone is set up. How to adjust the size? Only accessible when the status is in the ON position. 1. Push the c ursor key ↑ or ↓ to high ...

  • Barco SLM R12+ - page 93

    7. Rand om Access Adjustment Mode Image 7-13 Width set up for project or 1 Image 7-14 Width set up for project or 2 7.5.8 Adjusting the bl ack level of the images Why For dark images, the overlap zone will be brighter then the rest of the images. Therefore we can rise the black level of the remaining image (excluding the overlap zone). How to adjus ...

  • Barco SLM R12+ - page 94

    7. Rand om Access Adjustment Mode A C B 12 13 11 R G B RGB Image 1 Image 2 Image 7- 15 Black level adju stment 7.6 Picture in Picture ( PiP) Overview • Introduction to PiP • Picture in Picture activation • Picture in Picture source • Position of Picture in Picture window • Set up of the Quick Selection 7.6.1 Introduct ion to PiP PiP PiP s ...

  • Barco SLM R12+ - page 95

    7. Rand om Access Adjustment Mode Image 7- 16 Possible p osition for P iP 7.6.2 Picture in Pictu re activation How to activate P IP? 1. Push the cursor key ↑ or ↓ to highlight PIP . RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY SCENERGIX PIP SAVE CHANGES Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu ...

  • Barco SLM R12+ - page 96

    7. Rand om Access Adjustment Mode 7.6.3 Picture in Pict ure source Which source disp layed in PiP 1. Push the c ursor key ↑ or ↓ to highlight Source . PIP STATUS [ON] SOURCE 01 POSITION [Top-Left] QUICK SELECT [OFF] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-55 2. Press EN TER to select. 3. Enter the source number w ...

  • Barco SLM R12+ - page 97

    7. Rand om Access Adjustment Mode 7.7 Save Changes What can be done The system saves automatically the changes every x minutes. W hen you want to save it qu icker , use the save changes option. How to sa ve 1. Push the cursor key ↑ or ↓ to highlight Save Changes . RANDOM ACCESS ADJUSTMENT MODE FILE SERVICE PICTURE TUNING GEOMETRY SCENERGIX PIP ...

  • Barco SLM R12+ - page 98

    7. Rand om Access Adjustment Mode 94 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 99

    8. Installa tion Mode 8. INST ALLA TION MODE Overview • Start up of the Installation mode • Input Slots • 800 peripheral • Source Switching •N o S i g n a l • Contrast Enhancement • Convergence • Configuration • Lens Adjustment • Quick Access Keys •O S D • Internal Patterns 8.1 Start up of the Installation mode Start up 1. P ...

  • Barco SLM R12+ - page 100

    8. Inst allation Mo de T o view or the change the input configurati on. 1. Push the cursor key ↑ or ↓ to highlight Input Slots . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS OSD INTERNAL PATTERNS Select with ↑ or ↓ then <ENTER> <EXIT> to ...

  • Barco SLM R12+ - page 101

    8. Installa tion Mode If no 800 peripheral indication is made on the menu, there are still two possibilities, no RCVDS or VS05 c onnected or RCVDS is switched off. When a 800 peripheral is connected to the projector, the input slots a re not accessible with the cursor key to toggle their function. 8.3 800 peripheral Overview • Defining the output ...

  • Barco SLM R12+ - page 102

    8. Inst allation Mo de Defining the communi cation protocol. 1. Push the cursor key ↑ or ↓ to highlight 800 Peripheral . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS OSD INTERNAL PATTERNS Select with ↑ or ↓ then <ENTER> <EXIT> to return M ...

  • Barco SLM R12+ - page 103

    8. Installa tion Mode 8.4 Source Switching Switching from one sou rce to another . T o minimize undesired effects when switching from one source to another one can use the S eamless switching mode, beside Seam- less switching there is a choice between several effects which render the transitions more enjoyable. How to sel ect a switchin g mode 1. P ...

  • Barco SLM R12+ - page 104

    8. Inst allation Mo de 8.5.1 Changing the Background Col or How to change ? 1. Push the cursor key ↑ or ↓ to highlight No signal . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS OSD INTERNAL PATTERNS Select with ↑ or ↓ then <ENTER> <EXIT> t ...

  • Barco SLM R12+ - page 105

    8. Installa tion Mode 4. Press ENTER to toggle betwe en [On] or [Off]. 8.5.3 Changing the Shutdown T ime Range The shutdown time can be set between 5 min. and 60 min. How to change ? T o set up the shutdown time, handle as follow: 1. Push the curso r key ↑ or ↓ to highlight No Signal . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO ...

  • Barco SLM R12+ - page 106

    8. Inst allation Mo de T o change the Contrast Enhancement value 1. Push the cursor key ↑ or ↓ to highlight C ontrast Enhancement . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS OSD INTERNAL PATTERNS Select with ↑ or ↓ then <ENTER> <EXIT> ...

  • Barco SLM R12+ - page 107

    8. Installa tion Mode 2. Press EN TER to select. The following message will be displayed : “Conver gence is reserved to qualified service personnel.” WARNING CONVERGENCE is reserved to qualified service personnel <ENTER> to accept <EXIT> to return Menu 8-22 8.8 Configuration What can be done? The way of physical installation of the ...

  • Barco SLM R12+ - page 108

    8. Inst allation Mo de How to start up. 1. Push the c ursor key ↑ or ↓ to highlight Lens . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS OSD INTERNAL PATTERNS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 8-24 2. Press EN TER to se ...

  • Barco SLM R12+ - page 109

    8. Installa tion Mode 3. Push the c ursor key ↑ or ↓ to shift the image up or down and ← or → to shift the image left or right. 4. W hen finished, press EXIT to g o to the lens adjustment menu or press ENTER to go to the zoom/foc us function. Press the selection key * to switch to a nother pattern. D ifferent patterns are available. Options ...

  • Barco SLM R12+ - page 110

    8. Inst allation Mo de How to get an overvi ew . 1. Push the c ursor key ↑ or ↓ to highlight Quick Access Keys . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT CONVERGENCE CONFIGURATION LENS QUICK ACCESS KEYS OSD INTERNAL PATTERNS Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 8-30 ...

  • Barco SLM R12+ - page 111

    8. Installa tion Mode 3. Push the c ursor key ↑ or ↓ to highlight Highlighted item color . OSD HIGHLIGHT ITEM COLOR [red] MENU POSITION [Default] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 8-33 4. Press ENTER to toggle between Y ellow, Red and Blue. 8.1 1.2 Menu Positi on How to change 1. Push the c ursor key ↑ or ? ...

  • Barco SLM R12+ - page 112

    8. Inst allation Mo de Av a i l a b l e p a t t e r n s - Outline -H a t c h - C olor bars - Multiburst - C hecker board - Pa ge Char - Alpha numeric char How to se lect an intern al patterns? 1. Push the cursor key ↑ or ↓ to highlight Intern al Patterns . INSTALLATION INPUT SLOTS 800 PERIPHERAL SOURCE SWITCHING NO SIGNAL CONTRAST ENHANCEMENT C ...

  • Barco SLM R12+ - page 113

    9. Service Mode 9. SER VICE MODE 9.1 Built-up Built-up The service menu is built-up in two parts which are connected together with the ’mo re’ item. If the desire d item is not in the list of the displayed menu, select ’more’ with the cursor key and push ENTER to display the other items in the service menu. 9.2 Start up Start up 1. Push the ...

  • Barco SLM R12+ - page 114

    9. Service Mode The following items will be displayed: • T ype of projector: SLM R12+ • Software version • Network module: yes • Proj. address: T o change the address of the proj ector , see "Change Projector Address", page 1 14 Installation: - front/ceiling - front/table - rear/ceiling - rear/table • Baud rate: transfer speed f ...

  • Barco SLM R12+ - page 115

    9. Service Mode The different levels are: • owner •u s e r • guest Depending on your password level some password protected items are accessible and others not. The owner (which has the highest level) can set up via the ’Access control list’ the accessibility of the dif ferent items. See ’Access Con trol List’. Get access t o the cont ...

  • Barco SLM R12+ - page 116

    9. Service Mode 6. Cha nge the position of S2. How to change the password ? 1. Push the c ursor key ↑ or ↓ to highlight Change Password . SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE... Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-6 2. Press ...

  • Barco SLM R12+ - page 117

    9. Service Mode 2. Press ENTER to display the Change password menu. Note: Only possible when Ow ner . CHANGE PASSWORD Enter new password OWNER 0000 USER 0000 GUEST 0000 ACCESS CONTROL LIST Select with ↑ or ↓ then <ENTER> Reprogram with ↓ , ↑ , ← or → or numeric keys <ENTER> to confirm <EXIT> to return Menu 9-9 3. Push ...

  • Barco SLM R12+ - page 118

    9. Service Mode 9.5 Changing Language Start up 1. Push the c ursor key ↑ or ↓ to highlight Change Language . SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE... Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-11 2. Press ENTER to display the Change ...

  • Barco SLM R12+ - page 119

    9. Service Mode 3. Push the c ursor key ↑ or ↓ to highlight Projector address . 4. Press ENTER to ac tivate. The first digit will be highlighted. 5. Rep rogram the address with ↑ , ↓ , ← , → keys Use the ↑ or ↓ key to select a new value, use the ← or → key to select a new digit. Or , use the numeric keys on the RCU to enter the ...

  • Barco SLM R12+ - page 120

    9. Service Mode 9.7.1 Start Up of the Serial Communicati on Start up 1. Push the c ursor key ↑ or ↓ to highlight Serial communication . SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE... Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-17 2. Press ...

  • Barco SLM R12+ - page 121

    9. Service Mode 9.7.3 Setting up the Interfac e Standard Set up The communication protocol for the communication between the pro jector and a computer can be set on R S232 or RS422. T o set up the desired protocol, handle as follow : 1. Push the c ursor key ↑ or ↓ to highlight Interface Standard . SERIAL COMMUNICATION PROJECTOR ADDRESS 001 BAUD ...

  • Barco SLM R12+ - page 122

    9. Service Mode Set up the network configu ration. T o set up the network configuration, follow the next procedure : 1. Push the cursor key ↑ or ↓ to highlight Network Configuration . SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION NETWORK LAMP DIMMING MORE... Select with ↑ or ↓ then <ENTE ...

  • Barco SLM R12+ - page 123

    9. Service Mode If a wrong value for an octet is entered, the following error messa ge will be d isplayed to indicate where the e rror is located. Example of message : "Invalid octet. Th e maximum value is 255 for each octet ! " . ERROR Invalid octet the maximum value is 255 for each octet! <EXIT> to return. Menu 9-25 9.9 Lamp Lamp ...

  • Barco SLM R12+ - page 124

    9. Service Mode 100 Clo value Time [h] L i g h t o u t p u t [ % ] Image 9-6 Linking via the RS232 in/ou t The constant light output of projectors in a chain (maximum 12 projectors) can be set to the same value by linking the projectors via the RS232 co nnector . T o the RS232in of the first projector , a terminator must be connected ( Z3498823 ). ...

  • Barco SLM R12+ - page 125

    9. Service Mode To slave 1 Master Projector Comm port Comm 800 splitter To slave 2 To slave 3 To next Comm 800 splitter "To Switcher" To slave 4 Comm 800 splitter To slave 5 To slave 6 To slave 7 or to next Comm 800 splitte r "To Switcher" Image 9-8 Principal d iagram: Linked via Comm port For more information about the use of t ...

  • Barco SLM R12+ - page 126

    9. Service Mode The lamp menu will be displayed. LAMP Constant Light output [OFF] Using [RS port] Mode [NORMAL] Serial number : R101111 Article number : R9840xxx Run time : 10 hours Remaining run time : 490 hours Number of strikes : 10 Z_AXIS : 100 Select with ↑ or ↓ then <ENTER> <EXIT> to return. Menu 9-27 How to switch the constan ...

  • Barco SLM R12+ - page 127

    9. Service Mode 2. Press EN TER to select. A dimming slider box appears on the screen. 3. Use the ↑ or ↓ keys to dim the lamp until the desired light output is reached. 9.1 1 BARCO Logo What can be done? The BARCO logo can be added to the image, in overlay or on a background, on any place o n the screen. How to ad d the BARCO log o or to cha ng ...

  • Barco SLM R12+ - page 128

    9. Service Mode A vailable Add Ins CLO : When activated, the lam p option ‘Constant light output’ in the menu ‘Lamp’ becomes available. Scenergix : When activated, soft edging become s possible in the Random access adjustment mode. How to activate an add-i ns? 1. Push the c ursor key ↑ or ↓ to highlight Add-Ins . SERVICE BARCO LOGO ADD ...

  • Barco SLM R12+ - page 129

    9. Service Mode Start Up 1. Push the c ursor key ↑ or ↓ to highlight Preset Input Balance . SERVICE BARCO LOGO ADD INS PRESET INPUT BALANCE ADVANCED PROCESSING DIAGNOSIS FACTORY DEFAULTS MORE... Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-34 2. Press EN TER to select. The following warning will be displayed : WARNING ...

  • Barco SLM R12+ - page 130

    9. Service Mode The Advanced Processing menu will be displayed. ADVANCED PROCESSING MINIMUM DELAY [ON] <ENTER> to toggle <EXIT> to return Menu 9-37 3. Select Minimum D elay and press ENTER to toggle between [ON] or [OFF]. 9.15 Diagnosis 9.15.1 How to start up the Diagnosis? What can be seen? The diagnosis menu gives the possibility to s ...

  • Barco SLM R12+ - page 131

    9. Service Mode FIB Formatter interface board How to select? 1. Push the cursor key ↑ or ↓ to highlight I2C . DIAGNOSIS I2C DMD SMPS LPS1 LPS2 LPS3 VOLTAGES FANSPEED Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-40 2. Press EN TER to select. The I2C Diagnosis overview will be displayed. If the indication behind the hex ...

  • Barco SLM R12+ - page 132

    9. Service Mode 9.15.4 SMPS How to select t he overvi ew? 1. Push the c ursor key ↑ or ↓ to highlight SMPS . DIAGNOSIS I2C DMD SMPS LPS1 LPS2 LPS3 VOLTAGES FANSPEED Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-44 2. Press EN TER to select. The SMPS overview menu will be displayed. SMPS µC VERSION 03.01 EEPROM VERSION ...

  • Barco SLM R12+ - page 133

    9. Service Mode 9.15.6 V oltages How to select t he overvi ew? 1. Push the cursor key ↑ or ↓ to highlight Voltages . DIAGNOSIS I2C DMD SMPS LPS1 LPS2 LPS3 VOLTAGES FANSPEED Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 9-48 2. Press EN TER to select. The voltage overview window will be displayed. VOLTAGES FAN1 VOLTAGE 14 ...

  • Barco SLM R12+ - page 134

    9. Service Mode 3. Are y ou sure to restore the factory defaults ? If yes, press the cursor key ↑ or ↓ to highlight Continue. A message will be displayed. Factory defaults Please wait Remaining tim e:xs e c Menu 9-52 If no, press the cursor key ↑ or ↓ to highlight Return. Restoring the factory defaults can take a while. W hen finished, the ...

  • Barco SLM R12+ - page 135

    10. Prog rammable Function Keys 10. PROGRAMMABLE FUNCTION KEYS 10.1 Function Keys What can be done with these keys? The five function keys on top of an adapted remote control can be programmed as short cut keys (quick access) to almost any adjustment menu. How can a function key be programmed? A function key can only be programmed when in the adjus ...

  • Barco SLM R12+ - page 136

    10. Pr ogrammable Functio n Keys 132 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 137

    A. Standard Sou rce set up File s A. ST ANDARD SOURCE SET UP FILES A.1 T able overview T able overview The following standard source files are pre-programmed in the projector . Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 1600_48V 1600x600i 48,0 40 62,500 135,000 2160 1600 651 600 1600_60V 1600x1200 60,0 00 75, ...

  • Barco SLM R12+ - page 138

    A. Standard Source set up Files Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 INTER_GR 1 184x886 67,170 61,79 6 92,941 1504 1 184 920 886 MAC_2 640x480 66,667 35,0 00 30,240 864 640 525 480 MAC_3 512x384 60,147 24,4 80 15,667 640 512 407 384 MAC_4 560_384 60,147 24,480 17,2 34 704 560 407 384 MAC_5 512x342 60,15 ...

  • Barco SLM R12+ - page 139

    A. Standard Sou rce set up File s Name 1 Resolu- tion 2 Fvert Hz 3 FHor kHz 4 Fpix MHz 5 Ptot 6 Pact 7 Ltot 8 Lact 9 SUNXGA77 1024x768 77,069 62,040 84,375 1360 1024 805 768 SUP_MAC 1024x768 60,000 48,780 63,999 1312 1024 813 768 SVGA_56V 800x600 56,250 35,1 56 36,000 1024 800 625 600 SVGA_60V 800x600 60,317 37,8 79 40,000 1056 800 628 600 SVGA_72V ...

  • Barco SLM R12+ - page 140

    A. Standard Source set up Files 136 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 141

    B. Built-In Dust Filters B. BUIL T-IN DUST FIL TERS B.1 Built-In Dust Filters first series projectors Overview • Dust filter on the front side • Dust filter on the back side • Dust filter on the bottom side W ARNING : As the p rojector has to be open ed, this proced ure has to be performed by qu alified service tech- nician. B.1.1 Dust fil te ...

  • Barco SLM R12+ - page 142

    B. Built-In D ust Filters Image B-2 Input box slide out 5. Slide out the input box a little. 6. Loosen the s crew on the front side. Image B-3 Front screw top cover removal 7. Remo ve the back cover , see "Dust filt er on the b ack side", page 139. 8. Turn out the screw on the top and the right side. 9. T ake of f the top cover. 10. Turn ...

  • Barco SLM R12+ - page 143

    B. Built-In Dust Filters How to cle an 1. Clean the dust filter with a d ry cloth or blow out with compressed air . Reinsert the dust filte rs and put the cover back on its place by fo llowing the opposit e procedure. T ake care to click the lens light cover into its p osition. Image B-5 B.1.2 Dust f ilter on the back side Necessary t ools • Flat ...

  • Barco SLM R12+ - page 144

    B. Built-In D ust Filters Image B-6 Back cover removal 2. T ake off the cover . 3. Turn out 2 times 4 screws to r emove both dust filters on the back side of the cover . Image B-7 Dust filter removal 4. T ake out the dust filters. 5. Turn out the 4 screw on the bottom side and take out the dust filter . 140 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 145

    B. Built-In Dust Filters Image B-8 Dust filter removal How to cle an 1. Clean the dust filter with a d ry cloth or blow out with compressed air . Reinsert the dust filters and put the cover b ack on its place by follow ing the opposite p rocedure. B.1.3 Dust fil ter on the bottom side Necessary t ools No tools. How to remove 1. Pull on both lips of ...

  • Barco SLM R12+ - page 146

    B. Built-In D ust Filters B.2 Built-In Dust Filters recent s eries projectors C AUTION : Always turn off the projecto r before proceeding to dust filter clea ning or replacement. T o avoid contaminati ng the projector with its removed dust filters, clean the dust filters far away from the projector or by preferenc e clean the filters in an other ro ...

  • Barco SLM R12+ - page 147

    B. Built-In Dust Filters B A Image B-1 1 Release dust filter at fro nt side 2. Loosen th e 4 captive screws (B) securing filter casing to projector front. The dust filter is released and can be removed (C) for cleaning or replacement. C Image B-12 Removing dust filter from its casing How to cle an! 1. Put the dirty air filter far away from the proj ...

  • Barco SLM R12+ - page 148

    B. Built-In D ust Filters B A C Image B-13 2. Secure t he position of the air filter in its casing by tightening the 4 captive screws (C). B.2.2.2 Dust filters on the rear side of the project or Access to the a ir filt ers T o access the air filters on the rear of the projector , first the projector rear cover has to be removed. Necessary t ools Al ...

  • Barco SLM R12+ - page 149

    B. Built-In Dust Filters B A Image B-15 Removal metal fixation plate 2. Slide the metal fixation plate to the right unt il the screw head matches the free gap in the plate. 3. Remo ve metal fixation plate from rear cover. 4. Loosen the 3 hexagon socket screws (C) , securing metal fixation bar (D) to rear cover . C E D E Image B-16 Removal metal fix ...

  • Barco SLM R12+ - page 150

    B. Built-In D ust Filters 2. Brush m ost of the dust off with a soft brush and/or blow dust away with compresses air . Tip : Always replace damaged and/or too dirty air filters by a new one. How to reins tall the cleaned or new air fi lter 1. Place the air filters (A) on their place in the projector rear cover. A A B C Image B-18 Mounting the fixat ...

  • Barco SLM R12+ - page 151

    C. Troublesho oting C. TROUBLESHOOTING C.1 Error codes Overview The following table gives an overview of some important error codes displayed on the LED display of the projector . Error code Description Caused by Action 2002 lamp start failed • hot restrike • lamp with many strikes • maximum run time exceeded • Let cool down the lamp for at ...

  • Barco SLM R12+ - page 152

    C. Troubleshoot ing Error code Description Caused by Action 41 1 1 30V too low Call a qualified service engineer 41 12 15V too low Call a qualified service engineer 41 13 12V too low Call a qualified service engineer 41 14 5V too low Call a qualified service engineer 41 15 3V3 too low Call a qualified service engineer 4005 Wrong SMPS version Old SM ...

  • Barco SLM R12+ - page 153

    Gloss ary GLOSSAR Y 2:2 pull-down The process of transferring 24-frames/sec film format into video by repeating each frame (used for P AL DVD’s) as two video fields. (A D) 3:2 pull-down Method used to map the 24 fps of film onto the 30 fps (60 fields) o r 25 fps (50 fields), so tha t one film frame occupies three video fields, the next two, etc. ...

  • Barco SLM R12+ - page 154

    Gloss ary 150 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 155

    Index INDEX A Address 56 Program 56 RCU 56 Adjustment 51–52, 60 Local L CD Display 60 Quick set up 51–52 Lens 51 On screen color 52 Adjustment mode 59, 61–62 Random Access 61–62 Picture Services 62 Start up 61 start up 59 Aspect ratio 83 B Built-In Dust Filters 137, 142 First series projectors 137 Recent series projectors 142 C Color T empe ...

  • Barco SLM R12+ - page 156

    Index Convergence 102 Input Slots 95 Internal Patterns 10 7 Lens 103 No Signal 99–101 Background color 100 Shutdown Setting 100 Shutdown time 101 OSD 106–107 Color settings 106 Menu Position 107 Quick Access Keys 105 Source Switching 99 Start up 95 L Lamp 34 Run time 34 Lamp unit 17 Access 17 Installation 17 Lens 23, 25, 103 Adjustment 103 Clea ...

  • Barco SLM R12+ - page 157

    Index Start up 109 Side panel 19 Installation 19 source files 133 standard 133 Stacking Projectors 27 Standard source files 133 Switching off 35, 49 Switching on 33 Switching to standby 35, 49 T T emperature 1 1 Ambient 1 1 Troubleshooting 147 Error codes 147 Z Z-axis adjustment 20 R5976654 SLM R12+ 27/01/200 5 153 ...

  • Barco SLM R12+ - page 158

    Index 154 R5976654 SLM R12+ 27/01/2005 ...

  • Barco SLM R12+ - page 159

    Revision Sheet To : Barco nv Even ts/Documenta tion Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.8 9.70, Fax: +32 56.36.88.24 E-mail: antoon.dejaegher@barco.com, Web: www.barco.com From: Date: Please correct the following points in this documentation ( R5976654/05 ): page wrong correct R5976654 SLM R12+ 27/01/2005 ...

Manufacturer Barco Category Projector

Documents that we receive from a manufacturer of a Barco SLM R12+ can be divided into several groups. They are, among others:
- Barco technical drawings
- SLM R12+ manuals
- Barco product data sheets
- information booklets
- or energy labels Barco SLM R12+
All of them are important, but the most important information from the point of view of use of the device are in the user manual Barco SLM R12+.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Barco SLM R12+, service manual, brief instructions and user manuals Barco SLM R12+. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Barco SLM R12+.

Similar manuals

A complete manual for the device Barco SLM R12+, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Barco SLM R12+ by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Barco SLM R12+.

A complete Barco manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Barco SLM R12+ - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Barco SLM R12+, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Barco SLM R12+, that we can find in the current document
3. Tips how to use the basic functions of the device Barco SLM R12+ - which should help us in our first steps of using Barco SLM R12+
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Barco SLM R12+
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Barco SLM R12+ in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Barco SLM R12+?

Use the form below

If you did not solve your problem by using a manual Barco SLM R12+, ask a question using the form below. If a user had a similar problem with Barco SLM R12+ it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)