-
Homelite UT70127A - page 1
OPERA T OR’S MANU AL T rimmer / Brushcutter F3045 UT70127A SAVE THIS MANUAL FOR FUTURE REFERENCE Y our new trimmer has been engineered and manufactured to Homelite’ s high standard for dependability , ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. Thank you f or buying a H ...
-
Homelite UT70127A - page 2
2 ■ ■ ■ ■ ■ Safety ......................................................................................................................... ............................................ 2 - 3 ■ ■ ■ ■ ■ Symbols ........................................................................................................................ ...
-
Homelite UT70127A - page 3
3 ■ ■ ■ ■ ■ Inspect the unit before each use for loose fasteners, fuel leaks etc. Replace any damaged parts before use. ■ ■ ■ ■ ■ The string head or blade will rotate during carburettor adjustments. ■ ■ ■ ■ ■ It has been reported that vibrations from hand-held tools may contribute to a condition called Raynaud’s Syn- ...
-
Homelite UT70127A - page 4
4 SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates danger, warning or caution. It means attention!!! Your safety is involved. Rea ...
-
Homelite UT70127A - page 5
5 SAVE THESE INSTRUCTIONS Weight W ithout fuel, cutting a ttachment ................................................................................................ .......... 5.58 Kg With blade ..................................................................................................................... ...................... 5.90 Kg With s ...
-
Homelite UT70127A - page 6
6 UNP A CKING INSTRUCTIONS ■ ■ ■ ■ ■ Carefully remove the product from the carton. ■ ■ ■ ■ ■ Inspect the product to make sure no breakage or damage occurred during carriage. ■ ■ ■ ■ ■ Do not discard the packing material until you have inspected and operated the product. PACKING LIST FOR OWNER’S KIT ■ ■ ■ ■ ? ...
-
Homelite UT70127A - page 7
7 ATTACHING THE POWER HEAD TO THE TRIMMER ATTACHMENT See Figure 2. REMOVING THE ATTACHMENT FROM THE POWER HEAD For removing or changing the attachment: 1 . Loosen the knob. 2. Push in the button and twist the shafts to remove and separate ends. ATTACHING THE STORAGE HANGER See Figure 3. There are two ways to hang your attachment for storage. ■ ? ...
-
Homelite UT70127A - page 8
8 ASSEMBL Y FRONT HANDLE See Figure 4. A barrier handle should be used for ensuring the best control and maximising operator safety. 1 . Hold the top and bottom clamp snugly in position on the shaft housing so that handle will be located to the operator’s left. 2 . Insert the end of the handle between the clamps. 3 . Align the bolt holes and push ...
-
Homelite UT70127A - page 9
9 ASSEMBL Y GRASS DEFLECTOR FOR TRIMMER USE BLADE GUARD FOR BRUSHCUTTER USE Fig. 7 Fig. 6 BENT END OF SILENCER GUARD OPENING IN REAR HOUSING SCREWS SILENCER GUARD REAR HOUSING TORQUE WRENCH SILENCER GUARD ASSEMBLY See Figure 6. 1 . Remove silencer guard and two screws from the owner’s kit. 2 . Attach the silencer guard to the rear housing. NOTE: ...
-
Homelite UT70127A - page 10
10 ASSEMBL Y BLADE GUARD See Figure 8. 1 . Attach the blade guard to the mounting bracket; install the four screws (10-24 x 3/4 in) from the top of the mount- ing bracket through the blade guard and into the threaded mounting plates. 2 . Using the torque wrench supplied, tighten all four screws securely. NOTE: When using the string head, the string ...
-
Homelite UT70127A - page 11
11 ASSEMBL Y BLADE GUARD BLADE CUPPED WASHER BLADE NUT HOLDING PIN Fig. 10 SPANNER (13 mm) UPPER FLANGE WASHER INSTALLING THE BLADE See Figure 10. 1 . Place the upper flange washer over the gear shaft with the hollow side towards the blade guard. 2 . Centre the blade on the upper flange, making sure the blade sits flat. Install the cupped washer wi ...
-
Homelite UT70127A - page 12
12 FUEL AND REFUELLING HANDLING THE FUEL SAFELY ■ ■ ■ ■ ■ Always handle fuel with care. It is highly flammable. ■ ■ ■ ■ ■ Always refuel outdoors where there are no sparks and flames. Do not inhale fuel vapour. ■ ■ ■ ■ ■ Do not let petrol or oil come in contact with your skin. ■ ■ ■ ■ ■ Keep petrol and oil awa ...
-
Homelite UT70127A - page 13
13 ADVANCING THE STRING ADVANCING STRING USING THE EZ LINE™ TAP ADVANCE SYSTEM String advance is controlled by tapping string head on grass while running engine at full throttle. 1 . Run engine at full throttle. 2 . Tap string head on ground to advance string. String advances each time the head is tapped. 3 . Several taps may be required until st ...
-
Homelite UT70127A - page 14
14 W ARNING: Extreme care must be taken when using blades to ensure safe operation. Read the safety information for safe operation using the blade, refer to “Specific Safety Rules for Brushcutter and Blade Use” earlier in this manual. ■ Always hold brushcutter with both hands when operating. Use a firm grip on both handles. ■ Maintain your ...
-
Homelite UT70127A - page 15
15 W ARNING: Never start or run the engine inside a closed or poorly ventilated area; breathing exhaust fumes can kill. STARTING AND STOPPING See Figures 16 and 17. NOTE: The unit is equipped with an automatic choke feature. The starting instructions for this feature are different from units with a manual choke. Be sure to read and follow the start ...
-
Homelite UT70127A - page 16
16 ■ You may make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorised service dealer. ■ Consequences of improper maintenance may include excess carbon deposits resulting in loss of performance and discharge of black oily residue dripping from the silencer. ■ Make sure all guards, straps, defle ...
-
Homelite UT70127A - page 17
17 STRING REPLACEMENT See Figures 20, 21, 22 and 23. 1 . Stop the engine and disconnect the sparking plug wire. Hold the string head and unscrew the spool retainer. Turn clockwise. 2 . Remove the spool from the string head. NOTE: Keep the spring attached to the spool. Remove any old string remaining on the spool. 3. Cut two pieces of string, each b ...
-
Homelite UT70127A - page 18
18 2 1 3 S T O P S T S T OP 1 2 3 MAINTENANCE Fig. 26 AIR FILTER COVER FILTER Fig. 25 LATCH PULL COVER TO OPEN CLEANING THE EXHAUST PORT AND SILENCER Depending on the type of fuel used, the type and amount of oil used, and/or your operating conditions, the exhaust port and silencer may become blocked with carbon deposits. If you notice a power loss ...
-
Homelite UT70127A - page 19
19 MAINTENANCE The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loosened, the check valve may be faulty or the filter clogged. Replace fuel cap if required. SPARKING PLUG This engine uses a Champion RCJ-6Y with 0.63 mm (0.025 in ...
-
Homelite UT70127A - page 20
20 TR OUBLESHOO TING PROBLEM POSSIBLE CAUSE SOLUTION IF THESE SOLUTIONS DO NOT SOL VE THE PROBLEM, CONT A CT Y OUR A UTHORISED SER VICE DEALER. 1. Check spark. Remove sparking plug. Reattach the sparking plug cap and lay sparking plug on metal cylinder . Pull the starter rope and watch for spark at sparking plug tip. If there is no spark, repeat te ...
-
Homelite UT70127A - page 21
21 TR OUBLESHOO TING 1. Lubricate with silicone spray. 2 . Install more string. Refer to “String Replacement” earlier in this manual. 3 . Pull strings while alternately pressing down on and releasing spool retainer. 4 . Remove string from spool and rewind. Refer to “String Replacement” earlier in this manual. 5 . Advance string at full thro ...
-
Homelite UT70127A - page 22
22 GUARANTEE – STATEMENT (RTSA / RTUK / RTG) All Homelite products are guaranteed from defects in material and workmanship for a period of twenty-four (24) months, effective and evidenced from date of original invoice or delivery note. Defects caused by normal wear and tear, unauthorised/improper maintenance/handling or overload are excluded from ...
-
Homelite UT70127A - page 23
23 NO TES ...
-
Homelite UT70127A - page 24
983000-326 5-03 OPERA T OR’S MANU AL T rimmer / Brushcutter F3045 UT70127A Ryobi T echnologies GmbH Itterpark 7 D-40724 Hilden Germany Tel.: +49 (0)2103 / 29 58 0 Fax : +49 (0)2103 / 29 58 29 info@ryobi-rtg.de Ry obi T echnologies Customer Services Anvil House T uns Lane Henley-on-Thames RG9 1SA UK Homelite / R.T .S.A BP 50012 - 95945 Roissy CDG ...
У вас вопрос, касающийся Homelite UT70127A?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с Homelite UT70127A, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с Homelite UT70127A со всей вероятностью он захочет поделиться методом ее решения.