-
ADC HBG76 - page 1
HBG76 Installa tion/Oper a tor Manual ADC Part No. 1 13615 - 2 American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA T elephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 e-mail: techsupport@amdry .com ww w .amdry .com A VERTISSEMENT : Assurez-vous de bien suivre les instructions données dans cette notice pour réduire au minimu ...
-
ADC HBG76 - page 2
2 American Dryer Corp. 1 13615 - 2 “IMPORT ANT NO TE T O PUR CHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer . FOR Y OUR SAFETY Do not store or use gasoline or other flammable vapors and liquids i ...
-
ADC HBG76 - page 3
1 1361 5 - 2 ww w .amdry .com 3 T able of Contents ______ Proposition 65 Use of this product could expose you to substances from fuel combustion that contain chemicals known to the State of Califor nia to cause cancer , birth defects and other r eproductive harm. ▲ WARNING ! IMPORT ANT Y ou must disconnect and lockout the electric supply and the ...
-
ADC HBG76 - page 4
4 American Dryer Corp. 1 13615 - 2 Safety Precautions ___________________ Wa r ning For your safety , the information in this manual must be followed to minimize the risk of fire or explosion and to prevent property damage, personal injury , or loss of life. The dryer must never be operated with any of the back guards, outer top s, or service panel ...
-
ADC HBG76 - page 5
1 13615 - 2 ww w .amdry .com 5 The “Cool Down” Cycle of tumble dryers should be used to reduce the temperature of the items. They should not be removed from the tumble dryer or piled or stacked while hot. Fabric softeners or similar product s should not be used in a tumble dryer to eliminate the effect s of the static electricity , unless this ...
-
ADC HBG76 - page 6
6 American Dryer Corp. 1 13615 - 2 M AXI M UM CAP ACI T Y ( DR Y WE I G H T ) 7 5 l b 34.02 kg T U M BLER DI AM ET ER 3 7 ” 93.98 cm T U M B L E R D E P T H 35- 1/ 2” 90.17 cm T UM B LE R V OLU ME 2 2 . 0 9 c u f t 625.52 L TUM B L E R/D RIV E M O TO R 3 / 4 h p 0.56 kW BLO W ER / F AN M O T O R 3 / 4 hp 0.56 kW D OOR OP E NI NG (D I A ME T E R ...
-
ADC HBG76 - page 7
1 1361 5 - 2 ww w .amdry .com 7 Specifications _____________________________________________________________________ ...
-
ADC HBG76 - page 8
8 American Dryer Corp. 1 13615 - 2 Installation Procedures ______________ Installation should be performed by competent professional in accordance with local, state, and country codes. In the absence of these codes, the installation must conform to applicable American National S tandards: ANSI Z223.1- LA TEST EDITION (National Fuel Gas Code) or ANS ...
-
ADC HBG76 - page 9
1 13615 - 2 ww w .amdry .com 9 ! F r esh Air Suppl y Requirements ______ When the dryer is operating, it draws in room air , heats it, passes this air through the tumbler , and exhausts it out of the building. Therefore, the room air must be continually replenished from the outdoors. If the make-up air is inadequate, drying time and drying efficien ...
-
ADC HBG76 - page 10
10 American Dryer Corp. 1 13615 - 2 NOTE 1 Opening from combustible materials must be 2-inches (5.08 cm) larger than the duct (all the way around). The duct must be centered within this opening. NOTE 2 Distance should be 2 times the diameter of the duct to the nearest obstruction. Multiple Dr y er (Common) V enting Important: For extended ductwork ...
-
ADC HBG76 - page 11
1 13615 - 2 ww w .amdry .com 11 NOTE 1 Opening from combustible materials must be 2-inches (5.08 cm) larger than the duct (all the way around). The duct must be centered within this opening. NOTE 2 Distance should be 2 times the diameter of the duct to the nearest obstruction. Multiple Dryer V enting with 8-Inch (20.32 cm) Diameter 640 cfm (18.12 c ...
-
ADC HBG76 - page 12
12 American Dryer Corp. 1 13615 - 2 10/14/08 Grounding A ground (earth) connection must be provided and installed in accordance with local, state, and national regulations or codes of the country of origin. In the absence of these codes, grounding must conform to applicable requirements of the National Electrical Code ANSI/NFP A NO. 70-LA TEST EDIT ...
-
ADC HBG76 - page 13
1 13615 - 2 ww w .amdry .com 13 3-Phase (3ø) Wiring Connections / Hookup Gas Infor mation ______________________ It is your responsibility to have all plumbing connections, materials, and workmanship conform to local and state regulations or codes of the country of destination. In the absence of such codes, all plumbing connections, materials, and ...
-
ADC HBG76 - page 14
14 American Dryer Corp. 1 13615 - 2 Piping/Connections Inlet Connection – 1/2” M.N.P .T . CE and Australian dryer connections will be B.S.P .T ., all others will be N.P .T . There should be a minimum 6-inch (15.24 cm) clearance between the back guard and the first bend in the gas piping for ease of servicing. It is recommended that a gas shutof ...
-
ADC HBG76 - page 15
1 1361 5 - 2 ww w .amdry .com 15 Gas Pr essure T esting _________________ For proper operation, the gas pressure must be correct, consistent and maintained at the gas pressure rates shown on page 14. Provisions are made at the gas valve for t aking gas pressure readings. There are 2 types of devices used to measure gas pressure. They are the spring ...
-
ADC HBG76 - page 16
16 American Dryer Corp. 1 13615 - 2 ! Wa ter Infor mation ____________________ Before Y ou Star t Check Local Codes and P er mits Call your local water company or the proper municip al authority for information regarding local codes. Important: It is your responsibility to have all plumbing connections made by a qualified professional to ensure tha ...
-
ADC HBG76 - page 17
1 13615 - 2 ww w .amdry .com 17 Wa r ning Electrical power must be provided to the dryer at all times. If the main electrical power supply to the dryer is disconnected, the fire suppression system is inoperative!! Prepar ation f or Opera tion/Star t-Up __ The following items should be checked before attempting to operate the dryer: • Read all “ ...
-
ADC HBG76 - page 18
18 American Dryer Corp. 1 13615 - 2 Non-Coin Models Micropr ocessor Controller (Computer) The L.E.D. display reads “READY” (no cycle in progress). Press the letter on the keypad corresponding to the cycle desired (e.g. key “D”). The dryer will then start (i.e. blower , tumbler , and heat). The L.E.D. display will read MANUAL DRYING CYCLE D, ...
-
ADC HBG76 - page 19
1 13615 - 2 ww w .amdry .com 19 Warranty t ags (Part No. 450064) are available at “no charge” from ADC upon request. The company returning the p art(s) must clearly note the complete company name and address on the out side of the package. All returns must be properly packaged to ensure that they are not damaged in transit. Damage claims are th ...
-
ADC HBG76 - page 20
20 American Dryer Corp. 1 13615 - 2 Data Label Infor mation ____________________________________________________________ Standar d Label When contacting ADC, the information on the data label is required to ensure proper service/parts assist ance. The data label is located at the upper left rear of the dryer behind the back guard. 1. Model Number ? ...
-
ADC HBG76 - page 21
1 1361 5 - 2 ww w .amdry .com 21 NOTES __________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________ __________________________________________________________ ...
-
ADC HBG76 - page 22
ADC Part No. 1 13615 2 - 10/14/0 8 - 0 ...
У вас вопрос, касающийся ADC HBG76?
Воспользуйтесь формуляром, находящимся ниже
Если с помощью найденной инструкции Вы не решили свою проблему с ADC HBG76, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с ADC HBG76 со всей вероятностью он захочет поделиться методом ее решения.