Русский dropdown-ico

Инструкция обслуживания 3M 10500

44 страниц 0.92 mb
Скачать

Перейти на страницу of 44

Summary
  • 3M 10500 - page 1

    TM AccuGlide ™ is a Trademark of 3M, St. Paul, MN 55144-1000 Litho in U.S.A © 3M 2005 44-0009-2049-4( B ) AccuGlide 2+ S tainless S teel 2 Inch Upper and Lower T aping Heads T ype 10500 Instructions and Parts List Serial No. _____________________________________ For reference, record taping head(s) serial number(s) here. Important Safety Informa ...

  • 3M 10500 - page 2

    ...

  • 3M 10500 - page 3

    Replacement Parts and Service Information T o Our Customers: This is the 3M-Matic™/AccuGlide™/Scotch ® equipment you ordered. It has been set up and tested in the factory with Scotch ® t apes. If technical assist ance or replacement p art s are needed, call or fax the appropriate number listed below . Included with each machine is an Instruct ...

  • 3M 10500 - page 4

    ...

  • 3M 10500 - page 5

    Replacement Part s and Service Information T o Our Customers: This is the 3M-Matic™/AccuGlide™/Scotch ® equipment you ordered. It has been set up and tested in the factory with Scotch ® t apes. If any problems occur when operating this equipment and you desire a service call or phone consult ation, call, write or fax the appropriate number li ...

  • 3M 10500 - page 6

    ...

  • 3M 10500 - page 7

    Instruction Manual AccuGlide ™ 2+ Stainless Steel 2 Inch Upper and Lower Taping Heads Type 10500 Table of Contents Page Equipment Warranty and Limited Remedy .......................................................................................... ... ii Taping Head Contents ....................................................................... ...

  • 3M 10500 - page 8

    Equipment Warranty and Limited Remedy: THE FOLLOWING WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE: 3M sells its AccuGlide™ 2+ Stai ...

  • 3M 10500 - page 9

    1 AccuGlide™ 2+ Stainless Steel 2 Inch Upper Taping Head , Type 10500 Intended Use The intended use of the AccuGlide ™ 2+ Stainless Steel 2 Inch Upper and Lower Taping Heads is to apply a "C" clip of Scotch ® pressure-sensitive film box sealing tape to the top and/or bottom center seam of regular slotted containers. These taping head ...

  • 3M 10500 - page 10

    2 Import ant Safeguards This safety alert symbol identifies important safety messages in this manual. READ AND UNDERSTAND THEM BEFORE INSTALLING OR OPERATING THIS EQUIPMENT. Explanation of Signal Word Consequences Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury and/or property damage. WARN ...

  • 3M 10500 - page 11

    3 Import ant Safeguards (Continued) Important – In the event the following safety labels are damaged or destroyed, they must be replaced to ensure operator safety . See "Replacement Parts Illustrations and Parts Lists" for label part numbers. Figure 1-1 – Replacement Labels/3M Part Numbers 78-8133-9606-2 Tape Threading Label (Not show ...

  • 3M 10500 - page 12

    4 S pecifications 1. Tape: For use with Scotch ® pressure-sensitive film box sealing tapes. 2. Tape Width: 36 mm or 1-1/2 inches minimum to 48 mm [2 inches] maximum. 3. Tape Roll Diameter: Up to 405 mm [16 inches] maximum on a 76.2 mm [3 inch] diameter core. (Accommodates all system roll lengths of Scotch ® film tapes.) 4. Tape Application Leg Le ...

  • 3M 10500 - page 13

    5 Figure 2-1 – Dimensional Drawing S pecifications (Continued) ...

  • 3M 10500 - page 14

    6 Inst allation 1. The box conveying system must positively propel the box in a continuous motion, not exceeding 0.40 m/s [80 feet per minute], past the taping head assembly since the box motion actuates the taping mechanism. 2. If a pusher or cleated conveyor is being used, steps should be taken in the conveyor design to prevent the pusher from co ...

  • 3M 10500 - page 15

    7 Operation Figure 3-1 – Taping Head Components/Threading Diagram, Upper Head (Left Side View) Figure 3-2 – Taping Head Components/Threading Diagram – Lower Head (Left Side View) ...

  • 3M 10500 - page 16

    8 It is recommended that the detailed instructions and sketches in this manual be referred to the first few times the taping head is loaded/threaded until the operator becomes thoroughly familiar with the tape loading operation. Note – Remove tape roll before removing taping head from machine to minimize weight. Operation (Continued) Figure 3-3 I ...

  • 3M 10500 - page 17

    9 Operation (Continued) Manually turn tape roll to create slack tape while pulling threading needle through tape applying mechanism until needle is through and tape is in alignment with applying roller. Excess tape can be cut with a scissors at applying roller. Figure 3-5 Figure 3-4 Place tape roll on tape drum to dispense tape with adhesive side f ...

  • 3M 10500 - page 18

    10 The AccuGlide™ 2+ Stainless Steel Taping Head has been designed for long, trouble free service. The taping head will perform best when it receives routine maintenance and cleaning. Taping head components that fail or wear excessively should be promptly repaired or replaced to prevent damage to other portions of the head or to the product. Blad ...

  • 3M 10500 - page 19

    11 Maintenance (Continued) Applying/Buffing Roller Replacement Replacing roller requires removal of shaft and mounting screws. With no area on the shaft to grip, the shaft often turns when attempting to remove the second screw. To ease removal of second screw, a 4 mm hex socket has been provided at the bottom of the threads in both ends of the shaf ...

  • 3M 10500 - page 20

    12 Tape Drum Friction Brake – Figure 5-3 The tape drum friction brake on each taping head is pre-set for normal operation to prevent tape roll over travel. Should tension adjustment be required, turn the self-locking nut on the shaft to vary compression of the spring. Turn the nut clockwise to increase the braking force, and counterclockwise to d ...

  • 3M 10500 - page 21

    13 Adjustment s (Continued) Applying Mechanism Spring To obtain access to the spring, remove the taping head cover (four mounting screws). Replace cover when finished. The applying mechanism spring, shown in Figures 5-4A and 5-4B, controls applying and buffing roller pressure on the box and returns the mechanism to the reset position. The spring pr ...

  • 3M 10500 - page 22

    14 Adjustment s (Continued)| Figure 5-6 – Leading Tape Leg Length Figure 5-7 – Changing Tape Leg Length • To reduce the risk associated with shear, pinch, and entanglement hazards: − Turn air and electrical supplies off on associated equipment before performing any adjustments, maintenance, or servicing the machine or taping heads − Never ...

  • 3M 10500 - page 23

    15 (Continued) T roubleshooting Cause The tape is threaded incorrectly The tape tension is too low The knurled roller drags Tape tracks to one side or drags on the support tabs of applying frame The one-way tension roller is not correctly positioned Taping head is not set up properly The blade is dull and/or has broken teeth Tape tension is insuffi ...

  • 3M 10500 - page 24

    16 Problem Tape is tabbing on the trailing leg on the back of the box The tape end does not stay in application position in front of the applying roller Tape not centered on box seam Cause There is excess tension on the tape drum assembly and/or the one-way tension roller assembly Rollers in the tape path do not rotate freely The blade is not cutti ...

  • 3M 10500 - page 25

    17 S p are Parts/Service Information Recommended Spare Parts A set of spare parts that will periodically require replacement due to normal wear is supplied with the taping heads. The set includes the following which should be reordered when used to keep the taping heads in production: AccuGlide ™ 2+ Stainless Steel 2 Inch Upper Taping Head Qty. R ...

  • 3M 10500 - page 26

    18 Replacement Part s Illustrations and Parts List s AccuGlide™ 2+ Stainless Steel 2 Inch Upper Taping Head, Type 10500 AccuGlide™ 2+ Stainless Steel 2 Inch Lower Taping Head, Type 10500 1. Refer to the Taping Head Assemblies Figure to find all the parts illustrations identified by figure numbers. 2. Refer to the figure or figures to determine ...

  • 3M 10500 - page 27

    19 T aping Head Assemblies – AccuGlide™ 2+ St ainless Steel 2 Inch ...

  • 3M 10500 - page 28

    20 Figure 10518 – Upper Head ...

  • 3M 10500 - page 29

    21 Figure 10518 – 2" Upper Head Ref. No. 3M Part No. Description 10518-1 78.8134.2346.0 Frame - Tape Mount Upper Assy 10518-2 78.8134.2347.8 Frame - Front Upper Assy 10518-3 78-8068-4143-9 Guide - # 1 10518-4 78-8068-4144-7 Guide - # 2 10518-5 78-8134-2348-6 Screw - Hex.Hd., M4x12 10518-6 78-8060-8414-7 Nut - Hex., M4 10518-7 78-8134-2350-2 ...

  • 3M 10500 - page 30

    22 Figure 10519 – Upper and Lower Heads ...

  • 3M 10500 - page 31

    23 Figure 10519 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10519-1 78-8134-2359-3 Applying Arm # 1 10519-2 78-8134-2360-1 Applying Arm # 2 10519-3 78-8134-2361-9 Plate - Tape 10519-4 78-8134-2362-7 Sh a ft - Roller 10519-5 78-8134-2363-5 Roller - Knurled Assy 10519-6 78-8070-1266-7 Roller - Wrap 10519-7 78-8060-8220-8 Spacer ...

  • 3M 10500 - page 32

    24 Figure 10520 – Upper Head ...

  • 3M 10500 - page 33

    25 Figure 10520 – 2" Upper Head Ref. No. 3M Part No. Description 10520-1 78-8134-2366-8 Buffing Arm - R/H 10520-2 78-8134-2367-6 Buffing Arm - L/H 10520-3 78-8134-2368-4 S h af t - Roller 10520-4 78-8052-6586-1 Bushing - Buffing Roller 10520-5 78-8057-6178-6 Roller - Buffing 10520-7 78-8134-2370-0 Spacer - Spring 10520-8 78-8060-8234-9 Shaft ...

  • 3M 10500 - page 34

    26 Figure 10521 – Upper and Lower Heads ...

  • 3M 10500 - page 35

    27 Ref. No. 3M Part No. Description 10521-1 78-8134-2372-6 Link - Arm Assy, R/H 10521-2 78-8134-2373-4 Link - Arm Assy, L/H 10521-3 78-8134-2374-2 Shaft - Pivot 10521-4 78-8134-2375-9 Bearing - Special 30 mm 10521-5 78-8060-8241-4 Screw - Bearing Shoulder 10521-6 78-8060-8204-2 Screw - Hex.Hd., M6 x 12 Figure 10521 – 2" Upper and Lower Heads ...

  • 3M 10500 - page 36

    28 Figure 10522 – Upper and Lower Heads ...

  • 3M 10500 - page 37

    29 Figure 10522 – 2" Upper and Lower Heads Ref. No. 3M Part No. Description 10522-1 78-8134-2376-7 Frame - Cut-off Weldement 10522-2 78-8060-8419-6 Blade - 65mm/2.56 Inch 10522-3 78-8060-8342-0 Screw - Hex.Hd., M5 x 8 10522-4 78-8134-2377-5 Blade Guard Assy. 10522-5 78-8060-8265-3 Shaft - Blade Guard 10522-7 78-8060-8341-2 Screw - Flat Hd. M ...

  • 3M 10500 - page 38

    30 Figure 10523 – Upper and Lower Heads 4 14 ...

  • 3M 10500 - page 39

    31 Figure 10523 – 2" Latch Upper and Lower Heads Ref. No. 3M Part No. Description 10523-1 78-8134-1936-9 Bracket - Tape Drum 10523-2 78-8134-1937-7 Shaft - Tape Drum 50mm 10523-3 78-8134-1938-5 Nut - M18 x 1 10523-4 78-8134-2381-7 Tape Drum Sub-Assembly 10523-5 78-8098-8749-6 Tape Drum 10523-6 78-8134-2382-5 Leaf Spring 10523-7 78-8060-8337- ...

  • 3M 10500 - page 40

    32 Figure 10524 – Lower Head ...

  • 3M 10500 - page 41

    33 Figure 10524 – 2" Lower Head Ref. No. 3M Part No. Description 10524-1 78-8134-2385-8 Frame - Tape Mount Lower Assy 10524-2 78-8134-2386-6 Frame - Front Lower Assy 10524-3 78-8068-4144-7 Guide - # 2 10524-4 78-8068-4143-9 Guide - # 1 10524-5 78-8134-2348-6 Screw - Hex.Hd., M4 x 12 10524-6 78-8060-8414-7 Nut - Hex., M4 10524-7 78-8134-2350- ...

  • 3M 10500 - page 42

    34 Figure 10525 – Lower Head ...

  • 3M 10500 - page 43

    35 Figure 10525 – Lower Head Ref. No. 3M Part No. Description 10525-1 78-8134-2367-6 Buffing Arm - L/H 10525-2 78-8134-2366-8 Buffing Arm - R/H 10525-3 78-8134-2368-4 S h af t - Roller 10525-4 78-8052-6586-1 Bushing - Buffing Roller 10525-5 78-8057-6178-6 Roller - Buffing 10525-7 78-8134-2370-0 Spacer - Spring 10525-8 78-8060-8234-9 Shaft - 10 x ...

  • 3M 10500 - page 44

    THIS P AGE IS BLANK ...

Производитель 3M Категория VCR

Документы, которые мы получаем от производителя устройства 3M 10500 мы можем разделить на несколько групп. Это в частности:
- технические чертежи 3M
- инструкции обслуживания 10500
- паспорта изделия 3M
- информационные брошюры
- энергетические этикетки 3M 10500
Все из них важны, однако самую важную информацию с точки зрения пользователя мы найдем в инструкции обслуживания 3M 10500.

Группа документов, определяемая как инструкции обслуживания, делится также на более подробные типы, такие как: Инструкции монтажа 3M 10500, инструкции обслуживания, короткие инструкции или инструкции пользователя 3M 10500. В зависимости от потребностей, Вам необходимо поискать требуемый документ. На нашем сайте Вы можете просмотреть самую популярную инструкцию использования изделия 3M 10500.

Похожие инструкции обслуживания

Полная инструкция обслуживания устройства 3M 10500, как должна выглядеть?
Инструкция обслуживания, определяемая также как пособие пользователя, или просто "руководство" - это технический документ, цель которого заключается в использовании 3M 10500 пользователями. Инструкции пишет, как правило технический писатель, языком, доступным для всех пользователей 3M 10500.

Полная инструкция обслуживания 3M, должна заключать несколько основных элементов. Часть из них менее важная, как например: обложка / титульный лист или авторские страницы. Однако остальная часть, должна дать нам важную с точки зрения пользователя информацию.

1. Вступление и рекомендации, как пользоваться инструкцией 3M 10500 - В начале каждой инструкции, необходимо найти указания, как пользоваться данным пособием. Здесь должна находится информация, касающаяся местонахождения содержания 3M 10500, FAQ и самых распространенных проблем - то есть мест, которые чаще всего ищут пользователи в каждой инструкции обслуживания
2. Содержание - индекс всех советов, касающихся 3M 10500, которое найдем в данном документе
3. Советы по использованию основных функций устройства 3M 10500 - которые должны облегчить нам первые шаги во время использования 3M 10500
4. Troubleshooting - систематизированный ряд действия, который поможет нам диагностировать а в дальнейшем очередность решения важнейших проблем 3M 10500
5. FAQ - чаще всего задаваемые вопросы
6. Контактные данные Информация о том, где искать контактные данные производителя / сервисного центра 3M 10500 в данной стране, если самостоятельно не получится решить проблему.

У вас вопрос, касающийся 3M 10500?

Воспользуйтесь формуляром, находящимся ниже

Если с помощью найденной инструкции Вы не решили свою проблему с 3M 10500, задайте вопрос, заполнив следующий формуляр. Если у какого то из пользователей была похожая проблема с 3M 10500 со всей вероятностью он захочет поделиться методом ее решения.

Перепишите текст с картинки

Captcha
Новая картинка

Комментарии (0)