Bedienungsanleitung SIIG 04-0322B

12 Seiten 0.04 mb
Download

Zur Seite of 12

Summary
  • SIIG 04-0322B - page 1

    1 Serial ATA 4-Channel PCI Quick Installation Guide 04-0322B Introducing the Serial ATA 4-Channel PCI The Serial ATA 4-Channel PCI is an ultra high-speed four channel Serial ATA controller for use in Pentium-class computers. It achieves burst data transfer rates up to 150MB/s (1.5Gb/s) and supports various brand of hard disk drives with capacities ...

  • SIIG 04-0322B - page 2

    2 Package Contents • (1) Serial ATA 4-Channel PCI board • (1) Driver CD • (2) Serial ATA cable • (1) Dual connector Serial ATA power cable • This quick installation guide Board Layout Serial ATA Connectors CN4 CN3 CN2 CN1 Hard Disk LED Pins Figure 1. Serial ATA 4-Channel PCI Layout Hardware Installation General instructions for installing ...

  • SIIG 04-0322B - page 3

    3 • Remove your computer’s cover and install the card in an available PCI slot. • Push the board down firmly, but gently, until it is well seated. Install a slot bracket holding screw to secure the card. • Now go to Device Connection to connect your Serial ATA hard disk drive(s). Device Connection If you plan to use more than two Serial ATA ...

  • SIIG 04-0322B - page 4

    4 Note : If you like to monitor disk activity of the Serial ATA hard drives, you may at this time connect the hard disk LED of the system case to the Hard Disk LED Pins on the Serial ATA controller, see figure 1 , on page 2 for the location of the pins. For most systems connect the red wire to the pin farthest from the mounting bracket. 6. Replace ...

  • SIIG 04-0322B - page 5

    5 5. Insert the driver CD and click Next . 6. Select Search for a better driver ... and click Next . 7. Check CD-ROM drive, uncheck the other boxes, then click Next . Click Next again , then Finish . 8. Click Yes to restart Windows to complete the driver installation. For Existing Windows 98 Installation 1. Install the board and boot up Windows 98. ...

  • SIIG 04-0322B - page 6

    6 7. Click Finish , then click Yes to restart Windows to complete the driver installation. For Existing Windows ME Installation 1. Install the board and boot up Windows ME. 2. At the Add New Hardware Wizard , insert the driver CD. 3 . Select Automatic search for a better driver (Recommended) , then click Next . 4. Accept the selected driver, then c ...

  • SIIG 04-0322B - page 7

    7 2. At the Windows NT Setup screen, press F6 to specify and add the driver. 3. Press S , select Other , then press Enter . 4. Insert the driver diskette and press Enter . 5. Select Silicon Image SiI 3114 ... Controller for Windows NT 4.0 and 2000 , and press Enter . 6 . Press Enter to continue and follow on-screen instructions to complete Windows ...

  • SIIG 04-0322B - page 8

    8 Windows 2000 Driver Installation A new installation of Windows 2000 requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the Floppy folder, found on the driver CD, onto a blank floppy disk then follow the directions below. For New Windows 2000 Installation 1. Install the board and follow Microsoft pro ...

  • SIIG 04-0322B - page 9

    9 Windows XP/Server 2003 Driver Installation A new installation of Windows XP/Server 2003 requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the Floppy folder, found on the driver CD, onto a blank floppy disk then follow the directions below. For New Windows XP/Server 2003 Installation 1. Install the ...

  • SIIG 04-0322B - page 10

    10 Note : If a warning message pops up, click Continue Anyway , then click Finish . Our driver has been thoroughly tested in Windows for stability. 4. Remove the driver CD and restart Windows to complete the driver installation. Verify Proper Installation for Windows 2000/XP/ Server 2003 1. Right click My Computer and click Manage . 2. Select Devic ...

  • SIIG 04-0322B - page 11

    11 Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and one of our technical suppor ...

  • SIIG 04-0322B - page 12

    Serial ATA 4-Channel PCI is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective compa ...

Produzent SIIG Kategorie Computer Drive

Dokumente, die wir vom Produzenten des Geräts SIIG 04-0322B erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen SIIG
- Bedienungsanleitungen 04-0322B
- Produktkarten SIIG
- Informationsbroschüren
- oder Energieetiketten SIIG 04-0322B
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung SIIG 04-0322B.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen SIIG 04-0322B, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen SIIG 04-0322B. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts SIIG 04-0322B ansehen.

Ähnliche Bedienungsanleitungen

Die komplette Bedienungsanleitung des Geräts SIIG 04-0322B, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von SIIG 04-0322B hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von SIIG 04-0322B verständlich ist.

Eine gänzliche Bedienungsanleitung von SIIG sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von SIIG 04-0322B bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von SIIG 04-0322B befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich SIIG 04-0322B, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts SIIG 04-0322B - die uns die ersten Schritte während der Nutzung von SIIG 04-0322B erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit SIIG 04-0322B hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von SIIG 04-0322B im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich SIIG 04-0322B?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit SIIG 04-0322B nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit SIIG 04-0322B hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (0)