English dropdown-ico

Manual SIIG 04-0322B

12 pages 0.04 mb
Download

Go to site of 12

Summary
  • SIIG 04-0322B - page 1

    1 Serial ATA 4-Channel PCI Quick Installation Guide 04-0322B Introducing the Serial ATA 4-Channel PCI The Serial ATA 4-Channel PCI is an ultra high-speed four channel Serial ATA controller for use in Pentium-class computers. It achieves burst data transfer rates up to 150MB/s (1.5Gb/s) and supports various brand of hard disk drives with capacities ...

  • SIIG 04-0322B - page 2

    2 Package Contents • (1) Serial ATA 4-Channel PCI board • (1) Driver CD • (2) Serial ATA cable • (1) Dual connector Serial ATA power cable • This quick installation guide Board Layout Serial ATA Connectors CN4 CN3 CN2 CN1 Hard Disk LED Pins Figure 1. Serial ATA 4-Channel PCI Layout Hardware Installation General instructions for installing ...

  • SIIG 04-0322B - page 3

    3 • Remove your computer’s cover and install the card in an available PCI slot. • Push the board down firmly, but gently, until it is well seated. Install a slot bracket holding screw to secure the card. • Now go to Device Connection to connect your Serial ATA hard disk drive(s). Device Connection If you plan to use more than two Serial ATA ...

  • SIIG 04-0322B - page 4

    4 Note : If you like to monitor disk activity of the Serial ATA hard drives, you may at this time connect the hard disk LED of the system case to the Hard Disk LED Pins on the Serial ATA controller, see figure 1 , on page 2 for the location of the pins. For most systems connect the red wire to the pin farthest from the mounting bracket. 6. Replace ...

  • SIIG 04-0322B - page 5

    5 5. Insert the driver CD and click Next . 6. Select Search for a better driver ... and click Next . 7. Check CD-ROM drive, uncheck the other boxes, then click Next . Click Next again , then Finish . 8. Click Yes to restart Windows to complete the driver installation. For Existing Windows 98 Installation 1. Install the board and boot up Windows 98. ...

  • SIIG 04-0322B - page 6

    6 7. Click Finish , then click Yes to restart Windows to complete the driver installation. For Existing Windows ME Installation 1. Install the board and boot up Windows ME. 2. At the Add New Hardware Wizard , insert the driver CD. 3 . Select Automatic search for a better driver (Recommended) , then click Next . 4. Accept the selected driver, then c ...

  • SIIG 04-0322B - page 7

    7 2. At the Windows NT Setup screen, press F6 to specify and add the driver. 3. Press S , select Other , then press Enter . 4. Insert the driver diskette and press Enter . 5. Select Silicon Image SiI 3114 ... Controller for Windows NT 4.0 and 2000 , and press Enter . 6 . Press Enter to continue and follow on-screen instructions to complete Windows ...

  • SIIG 04-0322B - page 8

    8 Windows 2000 Driver Installation A new installation of Windows 2000 requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the Floppy folder, found on the driver CD, onto a blank floppy disk then follow the directions below. For New Windows 2000 Installation 1. Install the board and follow Microsoft pro ...

  • SIIG 04-0322B - page 9

    9 Windows XP/Server 2003 Driver Installation A new installation of Windows XP/Server 2003 requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the Floppy folder, found on the driver CD, onto a blank floppy disk then follow the directions below. For New Windows XP/Server 2003 Installation 1. Install the ...

  • SIIG 04-0322B - page 10

    10 Note : If a warning message pops up, click Continue Anyway , then click Finish . Our driver has been thoroughly tested in Windows for stability. 4. Remove the driver CD and restart Windows to complete the driver installation. Verify Proper Installation for Windows 2000/XP/ Server 2003 1. Right click My Computer and click Manage . 2. Select Devic ...

  • SIIG 04-0322B - page 11

    11 Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and one of our technical suppor ...

  • SIIG 04-0322B - page 12

    Serial ATA 4-Channel PCI is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective compa ...

Manufacturer SIIG Category Computer Drive

Documents that we receive from a manufacturer of a SIIG 04-0322B can be divided into several groups. They are, among others:
- SIIG technical drawings
- 04-0322B manuals
- SIIG product data sheets
- information booklets
- or energy labels SIIG 04-0322B
All of them are important, but the most important information from the point of view of use of the device are in the user manual SIIG 04-0322B.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals SIIG 04-0322B, service manual, brief instructions and user manuals SIIG 04-0322B. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product SIIG 04-0322B.

Similar manuals

A complete manual for the device SIIG 04-0322B, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use SIIG 04-0322B by users. Manuals are usually written by a technical writer, but in a language understandable to all users of SIIG 04-0322B.

A complete SIIG manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual SIIG 04-0322B - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the SIIG 04-0322B, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the SIIG 04-0322B, that we can find in the current document
3. Tips how to use the basic functions of the device SIIG 04-0322B - which should help us in our first steps of using SIIG 04-0322B
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with SIIG 04-0322B
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of SIIG 04-0322B in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning SIIG 04-0322B?

Use the form below

If you did not solve your problem by using a manual SIIG 04-0322B, ask a question using the form below. If a user had a similar problem with SIIG 04-0322B it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)