Manuel d’utilisation SIIG 04-0322B

12 pages 0.04 mb
Télécharger

Aller à la page of 12

Summary
  • SIIG 04-0322B - page 1

    1 Serial ATA 4-Channel PCI Quick Installation Guide 04-0322B Introducing the Serial ATA 4-Channel PCI The Serial ATA 4-Channel PCI is an ultra high-speed four channel Serial ATA controller for use in Pentium-class computers. It achieves burst data transfer rates up to 150MB/s (1.5Gb/s) and supports various brand of hard disk drives with capacities ...

  • SIIG 04-0322B - page 2

    2 Package Contents • (1) Serial ATA 4-Channel PCI board • (1) Driver CD • (2) Serial ATA cable • (1) Dual connector Serial ATA power cable • This quick installation guide Board Layout Serial ATA Connectors CN4 CN3 CN2 CN1 Hard Disk LED Pins Figure 1. Serial ATA 4-Channel PCI Layout Hardware Installation General instructions for installing ...

  • SIIG 04-0322B - page 3

    3 • Remove your computer’s cover and install the card in an available PCI slot. • Push the board down firmly, but gently, until it is well seated. Install a slot bracket holding screw to secure the card. • Now go to Device Connection to connect your Serial ATA hard disk drive(s). Device Connection If you plan to use more than two Serial ATA ...

  • SIIG 04-0322B - page 4

    4 Note : If you like to monitor disk activity of the Serial ATA hard drives, you may at this time connect the hard disk LED of the system case to the Hard Disk LED Pins on the Serial ATA controller, see figure 1 , on page 2 for the location of the pins. For most systems connect the red wire to the pin farthest from the mounting bracket. 6. Replace ...

  • SIIG 04-0322B - page 5

    5 5. Insert the driver CD and click Next . 6. Select Search for a better driver ... and click Next . 7. Check CD-ROM drive, uncheck the other boxes, then click Next . Click Next again , then Finish . 8. Click Yes to restart Windows to complete the driver installation. For Existing Windows 98 Installation 1. Install the board and boot up Windows 98. ...

  • SIIG 04-0322B - page 6

    6 7. Click Finish , then click Yes to restart Windows to complete the driver installation. For Existing Windows ME Installation 1. Install the board and boot up Windows ME. 2. At the Add New Hardware Wizard , insert the driver CD. 3 . Select Automatic search for a better driver (Recommended) , then click Next . 4. Accept the selected driver, then c ...

  • SIIG 04-0322B - page 7

    7 2. At the Windows NT Setup screen, press F6 to specify and add the driver. 3. Press S , select Other , then press Enter . 4. Insert the driver diskette and press Enter . 5. Select Silicon Image SiI 3114 ... Controller for Windows NT 4.0 and 2000 , and press Enter . 6 . Press Enter to continue and follow on-screen instructions to complete Windows ...

  • SIIG 04-0322B - page 8

    8 Windows 2000 Driver Installation A new installation of Windows 2000 requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the Floppy folder, found on the driver CD, onto a blank floppy disk then follow the directions below. For New Windows 2000 Installation 1. Install the board and follow Microsoft pro ...

  • SIIG 04-0322B - page 9

    9 Windows XP/Server 2003 Driver Installation A new installation of Windows XP/Server 2003 requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the Floppy folder, found on the driver CD, onto a blank floppy disk then follow the directions below. For New Windows XP/Server 2003 Installation 1. Install the ...

  • SIIG 04-0322B - page 10

    10 Note : If a warning message pops up, click Continue Anyway , then click Finish . Our driver has been thoroughly tested in Windows for stability. 4. Remove the driver CD and restart Windows to complete the driver installation. Verify Proper Installation for Windows 2000/XP/ Server 2003 1. Right click My Computer and click Manage . 2. Select Devic ...

  • SIIG 04-0322B - page 11

    11 Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our website at www.siig.com and click on Support . Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and one of our technical suppor ...

  • SIIG 04-0322B - page 12

    Serial ATA 4-Channel PCI is a trademark of SIIG, Inc. SIIG and SIIG logo are registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Pentium is a registered trademark of Intel Corporation. Other names used in publication are for identification only and may be trademarks of their respective compa ...

Fabricant SIIG Catégorie Computer Drive

Les documents que nous recevons du fabricant de l'appareilSIIG 04-0322B peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques SIIG
- manuels d’utilisations 04-0322B
- fiches produit SIIG
- dépliants
- ou étiquettes-énergie SIIG 04-0322B
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation SIIG 04-0322B.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation SIIG 04-0322B, manuels d’entretien, brefs manuels ou manuels de l’utilisateur SIIG 04-0322B. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit SIIG 04-0322B.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil SIIG 04-0322B, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser SIIG 04-0322B par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs SIIG 04-0322B.

Le manuel d’utilisation complet SIIG, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel SIIG 04-0322B - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières SIIG 04-0322B, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSIIG 04-0322B qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil SIIG 04-0322B - qui devraient nous aider dans les premières étapes lors de l'utilisation SIIG 04-0322B
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de SIIG 04-0322B
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service SIIG 04-0322B dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de SIIG 04-0322B?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec SIIG 04-0322B, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec SIIG 04-0322B il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)