Bedienungsanleitung Axxess Interface Automobile Accessories

12 Seiten 0.83 mb
Download

Zur Seite of 12

Summary
  • Axxess Interface Automobile Accessories - page 1

    © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION 1-800-221-0932 axxessinterf ace.com INST ALLA TION INSTRUCTIONS FOR PART RF ASWC The RF ASWC is designed for adding steering wheel controls to vehicles that do not have OE steering wheel controls installed. With Aftermarket radio’s with steering wheel control outputs the RF ASWC is able to giv ...

  • Axxess Interface Automobile Accessories - page 2

    Mounting The RF ASWC T ransmitter 1. Place button pad in the OESWC transmitter with the volume up arrow (^) in the spot where you want volume up to be.(g. 1) 2. Snap in trim ring to secure keypad in place. (g. 2) 3. Install the OESWC transmitter in desired place on steering wheel, wrapping the rubber strap around the steering wheel, through t ...

  • Axxess Interface Automobile Accessories - page 3

    Wiring The OESWC Interface 1. Connect the red wire to 12 volt accessory 2. Connect the Black wire to ground (you may use the same ground that you use for the aftermarket radio) If you are using an Eclipse or Kenwood radio, plug the female 3.5mm connector with the Brown and Brown/White wires into the male 3.5mm connector of the ASWC harness. * For K ...

  • Axxess Interface Automobile Accessories - page 4

    2. T urn on the ignition and press volume up on the RF ASWC. This will “marry“ the RF ASWC to the interface. NOTE: If you are replacing a transmitter you must turn on the ignition and within the rst 10 seconds press and hold the source button for ten seconds. This will “marry the new transmitter . Programming the RF ASWC 1. Complete connec ...

  • Axxess Interface Automobile Accessories - page 5

    5. The led will then ash up to 10 times. 6. This is the end of the auto detection stage. If the RF ASWC detected the radio successfully the led will light up solid red. 7. Make sure the steering wheel control buttons function correctly in the vehicle and enjoy your radio. So what if the led does not light up solid red? Check out troubleshooting ...

  • Axxess Interface Automobile Accessories - page 6

    Once all the information above has been veried and correct, refer back to the 2 sets of led ashes during the auto detect sequence. Here is what the ashes stand for: LED Feedback The led ashes represent what brand radio the RF ASWC believes it is connected to. Each ash is for a different radio manufacturer . For example you installed ...

  • Axxess Interface Automobile Accessories - page 7

    Remapping the SWC Buttons Let’s say you have the RF ASWC programmed to your radio and you want to change the button assignment for the steering wheel controls. For instance you would like Seek Up to be Mute. NOTES: • The RF ASWC must have detected the radio it is attached to before you can remap any buttons. • Y ou can only start the remappin ...

  • Axxess Interface Automobile Accessories - page 8

    5. Follow the list below in order however pushing the steering wheel control button you want for the function below . If you want to skip a command press the V olume Up on the steering wheel, this will tell the ASWC to skip the command and go to the next one. 1. V olume Up 2. V olume Down 3. Seek Up/Next 4. Seek Down/Prev 5. Source/Mode 6. Mute 7. ...

  • Axxess Interface Automobile Accessories - page 9

    * Note: Remember not all radios will have all these commands. Please refer to the radios’ owners manual for specic commands recognized by the radio. For instance the next command to be mapped is the V olume Down command. Let’s say you want the Mode button on your steering wheel to be the V olume Down command. Hold down the Mode button till t ...

  • Axxess Interface Automobile Accessories - page 10

    2. The led will turn on then release the V olume Down button and the led will turn off. 3. The original steering wheel control settings will be restored. Manually Setting The Radio T ype 1. Within the rst 20 seconds of turning the ignition on. Press and hold down the original V olume Down button (not the V olume Down button you just remapped) fo ...

  • Axxess Interface Automobile Accessories - page 11

    4. If you have a different radio then Eclipse, press the V olume Up button again till the led goes solid red, then release V olume Up. Y ou have now programmed Kenwood. 5. Here is the chart to show how many presses of the V olume Up button is needed for which radio you are trying to program: 1st led ash is for Eclipse 2nd led ash is for Kenwo ...

  • Axxess Interface Automobile Accessories - page 12

    REV . 1/10/1 1 1-800-221-0932 axxessinterf ace.com © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION INST ALLA TION INSTRUCTIONS FOR PART RF ASWC K NO WLEDGE IS P OW ER E nhance your installation and fabrication skills by enrolling in the most re cognized and re spected mobile electronics school in our industry . Log onto www .installerinstitut ...

Produzent Axxess Interface Kategorie Automobile Accessories

Dokumente, die wir vom Produzenten des Geräts Axxess Interface Automobile Accessories erhalten, können wir in mehrere Gruppen teilen. Unteranderem in:
- technische Zeichnungen Axxess Interface
- Bedienungsanleitungen Automobile Accessories
- Produktkarten Axxess Interface
- Informationsbroschüren
- oder Energieetiketten Axxess Interface Automobile Accessories
Jede von ihnen ist wichtig, jedoch finden wir die wichtigsten Informationen für den Nutzer des Geräts in der Bedienungsanleitung Axxess Interface Automobile Accessories.

Die Dokumentengruppe, die als Bedienungsanleitungen bezeichnet wird, wird ebenfalls in detaillierte Arten geteilt, solche wie: Montageanleitungen Axxess Interface Automobile Accessories, Wartungsanleitungen, Kurzanleitungen oder Benutzeranleitungen Axxess Interface Automobile Accessories. Abhängig vom Bedarf, sollten Sie das Dokument finden, das Sie brauchen. In unserem Service können Sie sich die populärste Bedienungsanleitung des Produkts Axxess Interface Automobile Accessories ansehen.

Die komplette Bedienungsanleitung des Geräts Axxess Interface Automobile Accessories, wie sollte sie aussehen?
Die Bedienungsanleitung, auch bezeichnet als Benutzerhandbuch, oder einfach nur „Anleitung”, ist ein technisches Dokument, das dem Benutzer bei der Nutzung von Axxess Interface Automobile Accessories hilfreich sein soll. Die Bedienungsanleitungen werden in der Regel von technischen Schriftstellern geschrieben, aber in einer Sprache, die für alle Nutzer von Axxess Interface Automobile Accessories verständlich ist.

Eine gänzliche Bedienungsanleitung von Axxess Interface sollte einige Grundelemente enthalten. Ein Teil von ihnen ist nicht so wichtig, wie z.B.: die Titelseite oder Autorenseiten. Die restlichen von ihnen jedoch, sollten Informationen liefern, die für den Nutzer von enormer Wichtigkeit sind.

1. Einführung und Hinweise, wie man sich in einer Bedienungsanleitung von Axxess Interface Automobile Accessories bewegt - Am Anfang jeder Bedienungsanleitung sollten wir Hinweise bezüglich der Nutzungsart eines bestimmten Ratgebers finden. In ihr sollten sich Informationen über die Lokalisierung des Inhaltsverzeichnisses von Axxess Interface Automobile Accessories befinden, FAQ oder über oft auftretende Probleme – also Stellen, die von den Benutzern in jeder Bedienungsanleitung am meisten gesucht werden
2. Inhaltsverzeichnis - Index aller Ratschläge bezüglich Axxess Interface Automobile Accessories, die wir im aktuellen Dokument finden
3. Ratschläge zur Nutzung der Grundfunktionen des Geräts Axxess Interface Automobile Accessories - die uns die ersten Schritte während der Nutzung von Axxess Interface Automobile Accessories erleichtern sollten
4. Troubleshooting - geordneter Tätigkeitslauf, der uns bei der Diagnose und als nächstes bei der Lösung wichtiger Probleme mit Axxess Interface Automobile Accessories hilft
5. FAQ - häufig gestellte Fragen
6. Kontaktdaten Informationen darüber, wo man Kontakt zum Produzenten / Service von Axxess Interface Automobile Accessories im bestimmten Land suchen kann, wenn es nicht gelingt, das Problem selbst zu lösen.

Haben Sie eine Frage bezüglich Axxess Interface Automobile Accessories?

Nutzen Sie das untere Formular

Wenn Sie mit Hilfe der gefundenen Bedienungsanleitung Ihr Problem mit Axxess Interface Automobile Accessories nicht gelöst haben, stellen Sie eine Frage, indem Sie das untere Formular nutzen. Wenn einer der Nutzer ein ähnliches Problem mit Axxess Interface Automobile Accessories hatte, ist es möglich, dass er mit Ihnen die Lösung teilen möchte.

Text vom Bild übertragen

Kommentare (1)

TimothyDep

Roller Door Servicing & Maintenance in Adelaide As with many mechanical devices, it is recommended that your garage door be serviced every 1-2 years depending on how frequently the door is used, environmental conditions etc. This helps prevent breakdowns and of course avoids inconvenience. Over time, springs lose tension, dirt and grime builds up in the guides, buildings move and motor parts wear. We’ll take the time to correctly service your door, as opposed to just fixing the problem. We gladly offer our customers a call back option where we will contact you when your door is next due for its service. A couple of things you can do to extend the life of your door include: Keep the tracks clean at all times Lubricate the tracks – this should NEVER be done with grease or oil! Only Silicon sprayed should be used – spray a little on the tracks and then wipe through with a clean rag. So... should you door be due (or overdue!) for some tender loving care, give our friendly team a call at Fast Fix Roller Doors and we will have you booked in within days and your door back up and running the way it should be! Call us today to arrange an appointment: (08) 8182 5787 <a href="http:/fastfixrollerdoors.com.au">doors</a>