-
Fluke PN 650454 - page 1
70/73 English Instru ction Sheet Page 1 ® 70/73 Series III Multimeter Instruction Sheet W Read First: Safety Information To ensure that the meter is us ed safely, fo llow these i nstructions: • Never use the m eter if the mete r or test lea ds look damaged. • Be sure the tes t leads and rot ary switc h are in the correc t position for t he des ...
-
Fluke PN 650454 - page 2
70/73 English Instru ction Sheet Page 2 Input Jacks 300 mA 10A COM FUSED V ! Milliamps Amps Volts, Ohms, Diode Test Common Terminal 600V 70 70 hr2f.eps See Specific ations for overl oad protection. Pushbutton Use the pushb utton to eith er select a fix ed range or p ut the meter in the Automat ic Touch Hold mode. Autorange The meter defa ults t ...
-
Fluke PN 650454 - page 3
70/73 English Instru ction Sheet Page 3 Automatic Touch Hold Mode W Warning To avoid electric shock, do not use the Touch Hold to determine if a circ uit with high volt age is dead. The Touch Hold mode will not capture unstable or noisy readings. The Touch H old mode autom atically captures and d isplays stable readi ngs. Press R fo ...
-
Fluke PN 650454 - page 4
70/73 English Instru ction Sheet Page 4 Standby If the meter is on but is inac tive for an ho ur (20 minutes i n diode test), the sc reen goes blank and display s selected ba r graph segments . To resume operat ion, turn the r otary switch or pr ess R . AC and DC Voltage ( K L m L ) + _ + _ V AC V DC + _ Volts AC Volts DC Millivolts DC V V V mV hr4 ...
-
Fluke PN 650454 - page 5
70/73 English Instru ction Sheet Page 5 Diode Test ( G ) Forward Bias Single Beep Reverse Bias Shorted Open or Good Diode Bad Diode + _ + _ Bad Diode + _ Good Diode + _ hr7f.eps ...
-
Fluke PN 650454 - page 6
70/73 English Instru ction Sheet Page 6 Continuity Test ( R ) + _ + _ hr5f.eps If continuity exists (res istance < 210 Ω ), the beeper s ounds continuous ly. The met er beeps twice if it is in th e Touch Hold mode. Current ( ? A ) W Warning To avoid injury, do n ot attempt a current measurement if the open circuit voltage is above the rate ...
-
Fluke PN 650454 - page 7
70/73 English Instru ction Sheet Page 7 Holster The snap-on h olster absorbs sho cks and protects the meter an d comes with a Flex -Stand . To pro tect the front of the meter, put the meter fac e down in the holster. hr15f.eps Maintenanc e W Warning To avoid electr ic shock, remo ve the test lead s before opening t he case, and clos e the case ...
-
Fluke PN 650454 - page 8
70/73 English Instru ction Sheet Page 8 Internal Fuse Test 300 mA Ω 5-8 Ω <0.5 OK OK 10 A OK 70 OK hr10f.eps Battery and Fuse Re placeme nt Note Before opening the case, mak e sure the tes t leads are removed and the rotary sw itch is turned to OFF. F1 F2 70 hr11f.eps ...
-
Fluke PN 650454 - page 9
70/73 English Instru ction Sheet Page 9 Cleaning To clean the m eter, use a dam p cloth and m ild detergent; d o not use abrasiv es or solvents o n the meter. Service a nd Part s For servic e information in t he U.S.A. and C anada, call 1-8 00-44- FLUKE (1-800-44 3-5853), in Europe, 31 40 267 8200, from other countries, 1- 425-356-5500 . Item Descr ...
-
Fluke PN 650454 - page 10
70/73 English Instru ction Sheet Page 10 Electromagnet ic Compatibility in RF field of 3 V/m on all functi ons exc ept M Ω Total a ccurac y = Spe cified ac curacy plus + 2.0% of range for all functi ons excep t: 320.0 mV range: tot al acc uracy = specified accuracy + 1.0% of range 320.0 Ω range: total accuracy = specifi ed accuracy + 8% of rang ...
-
Fluke PN 650454 - page 11
70/73 English Instru ction Sheet Page 11 Function Range Accuracy 0L 3.200 V, 32.00 V, 320.0 V 600 V ± (0.3%+1) ± (0.4%+1) m L 320.0 mV ± (0.3%+1) K (45 to 500 Hz, 3.2V range. Other ranges 45 to 1 kHz) 3.200 V, 32.00 V, 320.0 V, 600 V ± (2%+2) ± (2%+2) 320.0 Ω 3200 Ω , 32.00 k Ω , 320.0 k Ω , 3.200 M Ω 32.00 M Ω ± (0.5%+2) ± (0.5% ...
-
Fluke PN 650454 - page 12
70/73 English Instru ction Sheet Page 12 Overload pro tection for all functions and r anges: 600 V. Function Input Impedance (Nominal) L , m L , K >10 M Ω , <50 pF Common Mo de Rejection Rat io (1 k Ω Un balanced ) Normal Mode Rejection L , m L >120 dB at dc, 50 Hz, or 60 Hz >60 dB at 50 Hz or 60 Hz K >60 dB dc to 60 Hz Open Circ ...
¿Tienes una pregunta acerca de Fluke PN 650454?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Fluke PN 650454, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Fluke PN 650454 probablemente compartirá una forma de solucionarlo.