Español dropdown-ico

Manual de instrucciones Black Box IC165A

34 de páginas 0.15 mb
Descargar

Pasar a la página of 34

Summary
  • Black Box IC165A - page 1

    MARCH 2001 IC165A IC165AE USB Dir ector/4-Port Hub CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500 ) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.b ...

  • Black Box IC165A - page 2

    1 FCC AND IC STATEMENTS FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro- tection against har ...

  • Black Box IC165A - page 3

    2 USB DIRECTOR/4-PORT HUB • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ...

  • Black Box IC165A - page 4

    3 CE AND UL INFORMATION European Union Declaration of Conformity This is to certify that this device is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN55022: 1987 Class B (CISPR 22:1985/BS6527:1988). This product als ...

  • Black Box IC165A - page 5

    4 USB DIRECTOR/4-PORT HUB NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las adverte ...

  • Black Box IC165A - page 6

    5 NOM STATEMENT 10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros aparatos (incluyendo amplificadores) que producen calor . 11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como se indi ...

  • Black Box IC165A - page 7

    6 USB DIRECTOR/4-PORT HUB TRADEMARKS Microsoft ® , Windows ® , and Windows NT ® are registered trademarks of Microsoft Corporation. UL ® is a registered trademark of Underwriters Laboratories Incorporated. Velcro ® is a registered trademark of Velcro USA Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of ...

  • Black Box IC165A - page 8

    7 CONTENTS CONTENTS 1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.2 System Requirements . . . . . . . . . . . . . . . . . . . 11 2.3 What the Package Includes . . . ...

  • Black Box IC165A - page 9

    8 USB DIRECTOR/4-PORT HUB 1. Specifications Software Requirements — USB-enabled opera-ting system such as Windows ® 95 OSR2.1 or later, Windows 98, or Windows NT ® 5.0, Windows 2000, any Macintosh operating system with USB support Cable Wiring — 90 Ω ±15% unshielded or shielded for low-speed devices; 90 Ω ±15% shielded for full- speed d ...

  • Black Box IC165A - page 10

    9 CHAPTER 1: Specifications Certifications — CE, FCC Class B, VCCI Class B, EN 55022 Class B (CISPR 22) Safety — UL, cUL, TUV/GS Temperature Tolerance — Operating: 32 to 104°F (0 to 40°C); Storage: -4 to +167°F (-20 to +75°C) Humidity Tolerance — 5 to 95% noncondensing Hub Power Requirements — IC165A: 110 VAC, 60 Hz; IC165AE: 220 VAC, ...

  • Black Box IC165A - page 11

    10 USB DIRECTOR/4-PORT HUB 2. Introduction 2.1 Overview The USB Director/4-Port Hub is a medium-speed and standalone universal serial bus (USB) hub. The USB Director/4-Port Hub supplies four additional USB ports to attach devices and/or additional hubs. The hubs can easily be daisychained, up to five hubs deep in series, in any combination that doe ...

  • Black Box IC165A - page 12

    11 CHAPTER 2: Introduction The USB Director/4-Port Hub is a dual-powered device that can be powered via the uplink connection (bus-powered) or via an optional power supply (self- powered). When bus-powered, the four downstream ports support “low-power” devices rated at less than 1 ⁄ 2 watt ( 1 ⁄ 10 amp @ 5 VDC) each, such as a camera, print ...

  • Black Box IC165A - page 13

    12 USB DIRECTOR/4-PORT HUB (A generic hub driver is supplied with the latest version of Microsoft Windows 95 also known as OSR2.1 or later, Windows 98, Windows NT, or Windows 2000. Call Technical Support at 724-746-5500 if you’re using Windows 2000. 2.3 What the Package Includes Your package should include the following items. If anything is miss ...

  • Black Box IC165A - page 14

    13 CHAPTER 2: Introduction 2.4 Hardware Description The USB Director/4-Port Hub has one connector for upstream connection to a host, and four port connectors for downstream connections to the devices. It also has a power connector for the optional power supply, eight LED indicators for status information, and a stand for mounting (see Figure 2-1 ). ...

  • Black Box IC165A - page 15

    14 USB DIRECTOR/4-PORT HUB 2.5 Typical Application Figure 2-2. Typical Application. BLACK BOX 724-746 -5500 ® R PC/Server Digital Camera Card Reader Scanner USB Modem USB Director/ 4-Port Hub ...

  • Black Box IC165A - page 16

    15 CHAPTER 3: Installation 3. Installation 3.1 Initial Checkout 3.1.1 B US -P OWERED C HECKOUT While the host PC is powered on, connect a USB cable between the host’s USB type A receptacle and the Hub’s type B receptacle (uplink connection). The Hub’s power indicator, bus-powered, and the uplink port LED will turn on. Then the host PC will lo ...

  • Black Box IC165A - page 17

    16 USB DIRECTOR/4-PORT HUB cable into the Hub’s power connector. The hub will go through a reset and operate in the bus-powered mode; however, the bus-powered LED will be off. When the optional power adapter is connected, USB high-power devices can be attached to the Hub. Refer to the instructions supplied with each USB device for their individua ...

  • Black Box IC165A - page 18

    17 CHAPTER 3: Installation the cable is 16.4 ft. (5 m) for full-speed connections and 9.8 ft. (3 m) for low-speed connections. Figure 3-1 shows the cable connections. Figure 3-1. Cable Connections. NOTE Low-speed connections can use unshielded or shielded cable, but full-speed connections must use shielded cable. 4 3 2 1 Uplink 5.25V 2.1A 4 3 2 1 U ...

  • Black Box IC165A - page 19

    18 USB DIRECTOR/4-PORT HUB C ONNECTOR P INOUTS Figures 3-2 and 3-3 and Table 3-1 illustrate the pinouts of the USB type A receptacle and USB type B receptacle. Figure 3-2. USB Type “A” Receptacle. Figure 3-3. USB Type “B” Receptacle. Table 3-1. Connector Pinouts Pin Number Signal 1 +5 VDC 2 - Data 3 + Data 4 Ground USB type “B” receptac ...

  • Black Box IC165A - page 20

    19 CHAPTER 3: Installation 3.4 Power Controls When the hub is connected to the USB connection, it initially draws less than 1 ⁄ 10 of an amp from the host connection. Each port is enabled one at a time. Initially, all attached devices are only allowed to draw 1 ⁄ 10 amp or less each. When the hub is identified, it tells the host whether it is b ...

  • Black Box IC165A - page 21

    20 USB DIRECTOR/4-PORT HUB 4. Operation The USB Director/4-Port Hub is an extension of the host’s USB bus. You only have to plug it into the host USB connector to operate. The hub is hot-pluggable; you can plug it in at any time, even when the host PC is powered on. When attached, the operation is automatic. The host software will detect that a d ...

  • Black Box IC165A - page 22

    21 CHAPTER 4: Operation a resume command from the host that takes the device out of suspend. The Hub is supported by the Microsoft ® Windows ® generic USB hub driver supplied with the latest version of Microsoft Windows 95 also known as OSR2.1, Windows 98, and Microsoft Windows NT 5.0. NOTE If you’re using WIndows 2000, call Technical Support a ...

  • Black Box IC165A - page 23

    22 USB DIRECTOR/4-PORT HUB Table 4-1. LED Functions LED Position Function POWER ON (green) Power ON. OFF No power or low input voltage (< 3.5 VDC). BUS/LOCAL ON (green) Bus-powered. OFF Local power (self-powered). RESET ON (amber) Reset or uplink disconnected or host powered off. OFF Not reset/Host connection established. PORTS 1–4 ON (green) ...

  • Black Box IC165A - page 24

    23 CHAPTER 4: Operation Table 4-1 (continued). LED Functions LED Position Function UPLINK (continued) Red LED ON (red) A bus-powered overcurrent condition exists. OFF Port disconnected or low input voltage. NOTE All LEDs are normally turned off when suspend mode is activated. Exceptions to this are when error conditions exist before entering suspen ...

  • Black Box IC165A - page 25

    24 USB DIRECTOR/4-PORT HUB 5. T roubleshooting 5.1 Power Problems If an overcurrent condition of > 1 ⁄ 2 amp is sensed at a port by the hub, that port’s power will be limited (< 1 ⁄ 10 amp). The condition will be reported back to the host, the host will shut off the port, and the port LED will be off. If a port LED is off, an overcurren ...

  • Black Box IC165A - page 26

    25 CHAPTER 5: Troubleshooting on. If the uplink port red LED is on, disconnect all of the devices and reset the hub as described on the previous page. Then plug the devices in one at a time and run their applications, noting when the failure reoccurs. NOTE If a device is unplugged while in suspend mode, its configuration informaton will be reset. T ...

  • Black Box IC165A - page 27

    26 USB DIRECTOR/4-PORT HUB Symptom: Hub host port red LED is on. Cause: Overcurrent condition exists. Solutions: 1. Disconnect port 1 through 4 devices one at a time until the LED goes off. 2. If all devices are removed and the LED is still on, reset the hub. To reset the hub, unplug its uplink connection and plug it back in. If the LED is still on ...

  • Black Box IC165A - page 28

    27 CHAPTER 5: Troubleshooting Symptom: A single port LED is off. Cause: The port has been disabled by the host. An overcurrent condition may exist on that port or the device driver identified a problem with the device and turned it off. Solutions: 1. Disconnect the device. If the LED does not come on, reset the hub. To reset the hub, unplug its upl ...

  • Black Box IC165A - page 29

    28 USB DIRECTOR/4-PORT HUB Symptom: All LEDs are off. Cause: The hub has been disconnected, powered off, or put into suspend mode. Solutions: 1. Host is in suspend mode. Press any key on the keyboard or move the mouse to exit suspend mode. 2. Upstream cable is disconnected. Reconnect. 3. Upstream hub or host is powered off. Make sure all upstream h ...

  • Black Box IC165A - page 30

    29 CHAPTER 5: Troubleshooting 2. Upstream cable is disconnected. Reconnect. 3. Make sure all upstream hubs are powered on. 5.3 Calling Black Box If you determine that your USB Director/4-Port Hub is malfunctioning, do not attempt to alter or repair the unit. It contains no user-serviceable parts. Contact Black Box Technical Support at 724-746-5500. ...

  • Black Box IC165A - page 31

    30 USB DIRECTOR/4-PORT HUB 5.4 Shipping and Packaging If you need to transport or ship your USB Director/ 4-Port Hub: • Package it carefully. We recommend that you use the original container. • If you are shipping the USB Director/4-Port Hub for repair, make sure you include everything that came in the original package. Before you ship, contact ...

  • Black Box IC165A - page 32

    NOTES ...

  • Black Box IC165A - page 33

    NOTES ...

  • Black Box IC165A - page 34

    1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 2000. Black Box Corporation. All rights reserved. ...

Fabricante Black Box Categoría Switch

Los documentos del dispositivo Black Box IC165A que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Black Box
- manuales de instrucciones IC165A
- hojas de producto Black Box
- folletos informativos
- o etiquetas energéticas Black Box IC165A
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Black Box IC165A.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Black Box IC165A, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Black Box IC165A. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Black Box IC165A.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Black Box IC165A, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Black Box IC165A. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Black Box IC165A.

El manual de instrucciones completo de Black Box debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Black Box IC165A - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Black Box IC165A, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Black Box IC165A que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Black Box IC165A - que deben facilitarnos los primeros pasos durante el uso de Black Box IC165A
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Black Box IC165A
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Black Box IC165A en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Black Box IC165A?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Black Box IC165A, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Black Box IC165A probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)