Italiano dropdown-ico

Manuale per l’uso Black Box IC165A

34 pagine 0.15 mb
Scarica

Vai alla pagina of 34

Summary
  • Black Box IC165A - page 1

    MARCH 2001 IC165A IC165AE USB Dir ector/4-Port Hub CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500 ) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.b ...

  • Black Box IC165A - page 2

    1 FCC AND IC STATEMENTS FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro- tection against har ...

  • Black Box IC165A - page 3

    2 USB DIRECTOR/4-PORT HUB • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ...

  • Black Box IC165A - page 4

    3 CE AND UL INFORMATION European Union Declaration of Conformity This is to certify that this device is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN55022: 1987 Class B (CISPR 22:1985/BS6527:1988). This product als ...

  • Black Box IC165A - page 5

    4 USB DIRECTOR/4-PORT HUB NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las adverte ...

  • Black Box IC165A - page 6

    5 NOM STATEMENT 10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros aparatos (incluyendo amplificadores) que producen calor . 11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como se indi ...

  • Black Box IC165A - page 7

    6 USB DIRECTOR/4-PORT HUB TRADEMARKS Microsoft ® , Windows ® , and Windows NT ® are registered trademarks of Microsoft Corporation. UL ® is a registered trademark of Underwriters Laboratories Incorporated. Velcro ® is a registered trademark of Velcro USA Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of ...

  • Black Box IC165A - page 8

    7 CONTENTS CONTENTS 1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.2 System Requirements . . . . . . . . . . . . . . . . . . . 11 2.3 What the Package Includes . . . ...

  • Black Box IC165A - page 9

    8 USB DIRECTOR/4-PORT HUB 1. Specifications Software Requirements — USB-enabled opera-ting system such as Windows ® 95 OSR2.1 or later, Windows 98, or Windows NT ® 5.0, Windows 2000, any Macintosh operating system with USB support Cable Wiring — 90 Ω ±15% unshielded or shielded for low-speed devices; 90 Ω ±15% shielded for full- speed d ...

  • Black Box IC165A - page 10

    9 CHAPTER 1: Specifications Certifications — CE, FCC Class B, VCCI Class B, EN 55022 Class B (CISPR 22) Safety — UL, cUL, TUV/GS Temperature Tolerance — Operating: 32 to 104°F (0 to 40°C); Storage: -4 to +167°F (-20 to +75°C) Humidity Tolerance — 5 to 95% noncondensing Hub Power Requirements — IC165A: 110 VAC, 60 Hz; IC165AE: 220 VAC, ...

  • Black Box IC165A - page 11

    10 USB DIRECTOR/4-PORT HUB 2. Introduction 2.1 Overview The USB Director/4-Port Hub is a medium-speed and standalone universal serial bus (USB) hub. The USB Director/4-Port Hub supplies four additional USB ports to attach devices and/or additional hubs. The hubs can easily be daisychained, up to five hubs deep in series, in any combination that doe ...

  • Black Box IC165A - page 12

    11 CHAPTER 2: Introduction The USB Director/4-Port Hub is a dual-powered device that can be powered via the uplink connection (bus-powered) or via an optional power supply (self- powered). When bus-powered, the four downstream ports support “low-power” devices rated at less than 1 ⁄ 2 watt ( 1 ⁄ 10 amp @ 5 VDC) each, such as a camera, print ...

  • Black Box IC165A - page 13

    12 USB DIRECTOR/4-PORT HUB (A generic hub driver is supplied with the latest version of Microsoft Windows 95 also known as OSR2.1 or later, Windows 98, Windows NT, or Windows 2000. Call Technical Support at 724-746-5500 if you’re using Windows 2000. 2.3 What the Package Includes Your package should include the following items. If anything is miss ...

  • Black Box IC165A - page 14

    13 CHAPTER 2: Introduction 2.4 Hardware Description The USB Director/4-Port Hub has one connector for upstream connection to a host, and four port connectors for downstream connections to the devices. It also has a power connector for the optional power supply, eight LED indicators for status information, and a stand for mounting (see Figure 2-1 ). ...

  • Black Box IC165A - page 15

    14 USB DIRECTOR/4-PORT HUB 2.5 Typical Application Figure 2-2. Typical Application. BLACK BOX 724-746 -5500 ® R PC/Server Digital Camera Card Reader Scanner USB Modem USB Director/ 4-Port Hub ...

  • Black Box IC165A - page 16

    15 CHAPTER 3: Installation 3. Installation 3.1 Initial Checkout 3.1.1 B US -P OWERED C HECKOUT While the host PC is powered on, connect a USB cable between the host’s USB type A receptacle and the Hub’s type B receptacle (uplink connection). The Hub’s power indicator, bus-powered, and the uplink port LED will turn on. Then the host PC will lo ...

  • Black Box IC165A - page 17

    16 USB DIRECTOR/4-PORT HUB cable into the Hub’s power connector. The hub will go through a reset and operate in the bus-powered mode; however, the bus-powered LED will be off. When the optional power adapter is connected, USB high-power devices can be attached to the Hub. Refer to the instructions supplied with each USB device for their individua ...

  • Black Box IC165A - page 18

    17 CHAPTER 3: Installation the cable is 16.4 ft. (5 m) for full-speed connections and 9.8 ft. (3 m) for low-speed connections. Figure 3-1 shows the cable connections. Figure 3-1. Cable Connections. NOTE Low-speed connections can use unshielded or shielded cable, but full-speed connections must use shielded cable. 4 3 2 1 Uplink 5.25V 2.1A 4 3 2 1 U ...

  • Black Box IC165A - page 19

    18 USB DIRECTOR/4-PORT HUB C ONNECTOR P INOUTS Figures 3-2 and 3-3 and Table 3-1 illustrate the pinouts of the USB type A receptacle and USB type B receptacle. Figure 3-2. USB Type “A” Receptacle. Figure 3-3. USB Type “B” Receptacle. Table 3-1. Connector Pinouts Pin Number Signal 1 +5 VDC 2 - Data 3 + Data 4 Ground USB type “B” receptac ...

  • Black Box IC165A - page 20

    19 CHAPTER 3: Installation 3.4 Power Controls When the hub is connected to the USB connection, it initially draws less than 1 ⁄ 10 of an amp from the host connection. Each port is enabled one at a time. Initially, all attached devices are only allowed to draw 1 ⁄ 10 amp or less each. When the hub is identified, it tells the host whether it is b ...

  • Black Box IC165A - page 21

    20 USB DIRECTOR/4-PORT HUB 4. Operation The USB Director/4-Port Hub is an extension of the host’s USB bus. You only have to plug it into the host USB connector to operate. The hub is hot-pluggable; you can plug it in at any time, even when the host PC is powered on. When attached, the operation is automatic. The host software will detect that a d ...

  • Black Box IC165A - page 22

    21 CHAPTER 4: Operation a resume command from the host that takes the device out of suspend. The Hub is supported by the Microsoft ® Windows ® generic USB hub driver supplied with the latest version of Microsoft Windows 95 also known as OSR2.1, Windows 98, and Microsoft Windows NT 5.0. NOTE If you’re using WIndows 2000, call Technical Support a ...

  • Black Box IC165A - page 23

    22 USB DIRECTOR/4-PORT HUB Table 4-1. LED Functions LED Position Function POWER ON (green) Power ON. OFF No power or low input voltage (< 3.5 VDC). BUS/LOCAL ON (green) Bus-powered. OFF Local power (self-powered). RESET ON (amber) Reset or uplink disconnected or host powered off. OFF Not reset/Host connection established. PORTS 1–4 ON (green) ...

  • Black Box IC165A - page 24

    23 CHAPTER 4: Operation Table 4-1 (continued). LED Functions LED Position Function UPLINK (continued) Red LED ON (red) A bus-powered overcurrent condition exists. OFF Port disconnected or low input voltage. NOTE All LEDs are normally turned off when suspend mode is activated. Exceptions to this are when error conditions exist before entering suspen ...

  • Black Box IC165A - page 25

    24 USB DIRECTOR/4-PORT HUB 5. T roubleshooting 5.1 Power Problems If an overcurrent condition of > 1 ⁄ 2 amp is sensed at a port by the hub, that port’s power will be limited (< 1 ⁄ 10 amp). The condition will be reported back to the host, the host will shut off the port, and the port LED will be off. If a port LED is off, an overcurren ...

  • Black Box IC165A - page 26

    25 CHAPTER 5: Troubleshooting on. If the uplink port red LED is on, disconnect all of the devices and reset the hub as described on the previous page. Then plug the devices in one at a time and run their applications, noting when the failure reoccurs. NOTE If a device is unplugged while in suspend mode, its configuration informaton will be reset. T ...

  • Black Box IC165A - page 27

    26 USB DIRECTOR/4-PORT HUB Symptom: Hub host port red LED is on. Cause: Overcurrent condition exists. Solutions: 1. Disconnect port 1 through 4 devices one at a time until the LED goes off. 2. If all devices are removed and the LED is still on, reset the hub. To reset the hub, unplug its uplink connection and plug it back in. If the LED is still on ...

  • Black Box IC165A - page 28

    27 CHAPTER 5: Troubleshooting Symptom: A single port LED is off. Cause: The port has been disabled by the host. An overcurrent condition may exist on that port or the device driver identified a problem with the device and turned it off. Solutions: 1. Disconnect the device. If the LED does not come on, reset the hub. To reset the hub, unplug its upl ...

  • Black Box IC165A - page 29

    28 USB DIRECTOR/4-PORT HUB Symptom: All LEDs are off. Cause: The hub has been disconnected, powered off, or put into suspend mode. Solutions: 1. Host is in suspend mode. Press any key on the keyboard or move the mouse to exit suspend mode. 2. Upstream cable is disconnected. Reconnect. 3. Upstream hub or host is powered off. Make sure all upstream h ...

  • Black Box IC165A - page 30

    29 CHAPTER 5: Troubleshooting 2. Upstream cable is disconnected. Reconnect. 3. Make sure all upstream hubs are powered on. 5.3 Calling Black Box If you determine that your USB Director/4-Port Hub is malfunctioning, do not attempt to alter or repair the unit. It contains no user-serviceable parts. Contact Black Box Technical Support at 724-746-5500. ...

  • Black Box IC165A - page 31

    30 USB DIRECTOR/4-PORT HUB 5.4 Shipping and Packaging If you need to transport or ship your USB Director/ 4-Port Hub: • Package it carefully. We recommend that you use the original container. • If you are shipping the USB Director/4-Port Hub for repair, make sure you include everything that came in the original package. Before you ship, contact ...

  • Black Box IC165A - page 32

    NOTES ...

  • Black Box IC165A - page 33

    NOTES ...

  • Black Box IC165A - page 34

    1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 2000. Black Box Corporation. All rights reserved. ...

Fabbricante Black Box Categoria Switch

I documenti che otteniamo dal fabbricante del dispositivoBlack Box IC165A possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Black Box
- manuali per l’uso IC165A
- schede prodotto Black Box
- opuscoli
- o etichette energetiche Black Box IC165A
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Black Box IC165A.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Black Box IC165A, manuali di manutenzione, brevi manuali o manuali utente Black Box IC165A. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Black Box IC165A.

Manuali per l’uso simili

Manuale completo del dispositivo Black Box IC165A, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Black Box IC165A dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Black Box IC165A.

Il manuale per l’uso completo Black Box, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Black Box IC165A - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Black Box IC165A, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Black Box IC165A che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Black Box IC165A - che ci dovrebbe aiutare nei primi passi durante l'uso Black Box IC165A
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Black Box IC165A
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Black Box IC165A in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Black Box IC165A?

Utilizza il modulo sottostante

Se non hai risolto il problema con Black Box IC165A con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Black Box IC165A è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)