Black Box IC165Aの取扱説明書

34ページ 0.15 mb
ダウンロード

ページに移動 of 34

Summary
  • Black Box IC165A - page 1

    MARCH 2001 IC165A IC165AE USB Dir ector/4-Port Hub CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500 ) FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Mailing address: Black Box Corporation , 1000 Park Drive, Lawrence, PA 15055-1018 Web site: www.b ...

  • Black Box IC165A - page 2

    1 FCC AND IC STATEMENTS FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS Class B Digital Device. This equipment has been tested and found to comply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro- tection against har ...

  • Black Box IC165A - page 3

    2 USB DIRECTOR/4-PORT HUB • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ...

  • Black Box IC165A - page 4

    3 CE AND UL INFORMATION European Union Declaration of Conformity This is to certify that this device is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN55022: 1987 Class B (CISPR 22:1985/BS6527:1988). This product als ...

  • Black Box IC165A - page 5

    4 USB DIRECTOR/4-PORT HUB NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las adverte ...

  • Black Box IC165A - page 6

    5 NOM STATEMENT 10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros aparatos (incluyendo amplificadores) que producen calor . 11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como se indi ...

  • Black Box IC165A - page 7

    6 USB DIRECTOR/4-PORT HUB TRADEMARKS Microsoft ® , Windows ® , and Windows NT ® are registered trademarks of Microsoft Corporation. UL ® is a registered trademark of Underwriters Laboratories Incorporated. Velcro ® is a registered trademark of Velcro USA Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of ...

  • Black Box IC165A - page 8

    7 CONTENTS CONTENTS 1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.2 System Requirements . . . . . . . . . . . . . . . . . . . 11 2.3 What the Package Includes . . . ...

  • Black Box IC165A - page 9

    8 USB DIRECTOR/4-PORT HUB 1. Specifications Software Requirements — USB-enabled opera-ting system such as Windows ® 95 OSR2.1 or later, Windows 98, or Windows NT ® 5.0, Windows 2000, any Macintosh operating system with USB support Cable Wiring — 90 Ω ±15% unshielded or shielded for low-speed devices; 90 Ω ±15% shielded for full- speed d ...

  • Black Box IC165A - page 10

    9 CHAPTER 1: Specifications Certifications — CE, FCC Class B, VCCI Class B, EN 55022 Class B (CISPR 22) Safety — UL, cUL, TUV/GS Temperature Tolerance — Operating: 32 to 104°F (0 to 40°C); Storage: -4 to +167°F (-20 to +75°C) Humidity Tolerance — 5 to 95% noncondensing Hub Power Requirements — IC165A: 110 VAC, 60 Hz; IC165AE: 220 VAC, ...

  • Black Box IC165A - page 11

    10 USB DIRECTOR/4-PORT HUB 2. Introduction 2.1 Overview The USB Director/4-Port Hub is a medium-speed and standalone universal serial bus (USB) hub. The USB Director/4-Port Hub supplies four additional USB ports to attach devices and/or additional hubs. The hubs can easily be daisychained, up to five hubs deep in series, in any combination that doe ...

  • Black Box IC165A - page 12

    11 CHAPTER 2: Introduction The USB Director/4-Port Hub is a dual-powered device that can be powered via the uplink connection (bus-powered) or via an optional power supply (self- powered). When bus-powered, the four downstream ports support “low-power” devices rated at less than 1 ⁄ 2 watt ( 1 ⁄ 10 amp @ 5 VDC) each, such as a camera, print ...

  • Black Box IC165A - page 13

    12 USB DIRECTOR/4-PORT HUB (A generic hub driver is supplied with the latest version of Microsoft Windows 95 also known as OSR2.1 or later, Windows 98, Windows NT, or Windows 2000. Call Technical Support at 724-746-5500 if you’re using Windows 2000. 2.3 What the Package Includes Your package should include the following items. If anything is miss ...

  • Black Box IC165A - page 14

    13 CHAPTER 2: Introduction 2.4 Hardware Description The USB Director/4-Port Hub has one connector for upstream connection to a host, and four port connectors for downstream connections to the devices. It also has a power connector for the optional power supply, eight LED indicators for status information, and a stand for mounting (see Figure 2-1 ). ...

  • Black Box IC165A - page 15

    14 USB DIRECTOR/4-PORT HUB 2.5 Typical Application Figure 2-2. Typical Application. BLACK BOX 724-746 -5500 ® R PC/Server Digital Camera Card Reader Scanner USB Modem USB Director/ 4-Port Hub ...

  • Black Box IC165A - page 16

    15 CHAPTER 3: Installation 3. Installation 3.1 Initial Checkout 3.1.1 B US -P OWERED C HECKOUT While the host PC is powered on, connect a USB cable between the host’s USB type A receptacle and the Hub’s type B receptacle (uplink connection). The Hub’s power indicator, bus-powered, and the uplink port LED will turn on. Then the host PC will lo ...

  • Black Box IC165A - page 17

    16 USB DIRECTOR/4-PORT HUB cable into the Hub’s power connector. The hub will go through a reset and operate in the bus-powered mode; however, the bus-powered LED will be off. When the optional power adapter is connected, USB high-power devices can be attached to the Hub. Refer to the instructions supplied with each USB device for their individua ...

  • Black Box IC165A - page 18

    17 CHAPTER 3: Installation the cable is 16.4 ft. (5 m) for full-speed connections and 9.8 ft. (3 m) for low-speed connections. Figure 3-1 shows the cable connections. Figure 3-1. Cable Connections. NOTE Low-speed connections can use unshielded or shielded cable, but full-speed connections must use shielded cable. 4 3 2 1 Uplink 5.25V 2.1A 4 3 2 1 U ...

  • Black Box IC165A - page 19

    18 USB DIRECTOR/4-PORT HUB C ONNECTOR P INOUTS Figures 3-2 and 3-3 and Table 3-1 illustrate the pinouts of the USB type A receptacle and USB type B receptacle. Figure 3-2. USB Type “A” Receptacle. Figure 3-3. USB Type “B” Receptacle. Table 3-1. Connector Pinouts Pin Number Signal 1 +5 VDC 2 - Data 3 + Data 4 Ground USB type “B” receptac ...

  • Black Box IC165A - page 20

    19 CHAPTER 3: Installation 3.4 Power Controls When the hub is connected to the USB connection, it initially draws less than 1 ⁄ 10 of an amp from the host connection. Each port is enabled one at a time. Initially, all attached devices are only allowed to draw 1 ⁄ 10 amp or less each. When the hub is identified, it tells the host whether it is b ...

  • Black Box IC165A - page 21

    20 USB DIRECTOR/4-PORT HUB 4. Operation The USB Director/4-Port Hub is an extension of the host’s USB bus. You only have to plug it into the host USB connector to operate. The hub is hot-pluggable; you can plug it in at any time, even when the host PC is powered on. When attached, the operation is automatic. The host software will detect that a d ...

  • Black Box IC165A - page 22

    21 CHAPTER 4: Operation a resume command from the host that takes the device out of suspend. The Hub is supported by the Microsoft ® Windows ® generic USB hub driver supplied with the latest version of Microsoft Windows 95 also known as OSR2.1, Windows 98, and Microsoft Windows NT 5.0. NOTE If you’re using WIndows 2000, call Technical Support a ...

  • Black Box IC165A - page 23

    22 USB DIRECTOR/4-PORT HUB Table 4-1. LED Functions LED Position Function POWER ON (green) Power ON. OFF No power or low input voltage (< 3.5 VDC). BUS/LOCAL ON (green) Bus-powered. OFF Local power (self-powered). RESET ON (amber) Reset or uplink disconnected or host powered off. OFF Not reset/Host connection established. PORTS 1–4 ON (green) ...

  • Black Box IC165A - page 24

    23 CHAPTER 4: Operation Table 4-1 (continued). LED Functions LED Position Function UPLINK (continued) Red LED ON (red) A bus-powered overcurrent condition exists. OFF Port disconnected or low input voltage. NOTE All LEDs are normally turned off when suspend mode is activated. Exceptions to this are when error conditions exist before entering suspen ...

  • Black Box IC165A - page 25

    24 USB DIRECTOR/4-PORT HUB 5. T roubleshooting 5.1 Power Problems If an overcurrent condition of > 1 ⁄ 2 amp is sensed at a port by the hub, that port’s power will be limited (< 1 ⁄ 10 amp). The condition will be reported back to the host, the host will shut off the port, and the port LED will be off. If a port LED is off, an overcurren ...

  • Black Box IC165A - page 26

    25 CHAPTER 5: Troubleshooting on. If the uplink port red LED is on, disconnect all of the devices and reset the hub as described on the previous page. Then plug the devices in one at a time and run their applications, noting when the failure reoccurs. NOTE If a device is unplugged while in suspend mode, its configuration informaton will be reset. T ...

  • Black Box IC165A - page 27

    26 USB DIRECTOR/4-PORT HUB Symptom: Hub host port red LED is on. Cause: Overcurrent condition exists. Solutions: 1. Disconnect port 1 through 4 devices one at a time until the LED goes off. 2. If all devices are removed and the LED is still on, reset the hub. To reset the hub, unplug its uplink connection and plug it back in. If the LED is still on ...

  • Black Box IC165A - page 28

    27 CHAPTER 5: Troubleshooting Symptom: A single port LED is off. Cause: The port has been disabled by the host. An overcurrent condition may exist on that port or the device driver identified a problem with the device and turned it off. Solutions: 1. Disconnect the device. If the LED does not come on, reset the hub. To reset the hub, unplug its upl ...

  • Black Box IC165A - page 29

    28 USB DIRECTOR/4-PORT HUB Symptom: All LEDs are off. Cause: The hub has been disconnected, powered off, or put into suspend mode. Solutions: 1. Host is in suspend mode. Press any key on the keyboard or move the mouse to exit suspend mode. 2. Upstream cable is disconnected. Reconnect. 3. Upstream hub or host is powered off. Make sure all upstream h ...

  • Black Box IC165A - page 30

    29 CHAPTER 5: Troubleshooting 2. Upstream cable is disconnected. Reconnect. 3. Make sure all upstream hubs are powered on. 5.3 Calling Black Box If you determine that your USB Director/4-Port Hub is malfunctioning, do not attempt to alter or repair the unit. It contains no user-serviceable parts. Contact Black Box Technical Support at 724-746-5500. ...

  • Black Box IC165A - page 31

    30 USB DIRECTOR/4-PORT HUB 5.4 Shipping and Packaging If you need to transport or ship your USB Director/ 4-Port Hub: • Package it carefully. We recommend that you use the original container. • If you are shipping the USB Director/4-Port Hub for repair, make sure you include everything that came in the original package. Before you ship, contact ...

  • Black Box IC165A - page 32

    NOTES ...

  • Black Box IC165A - page 33

    NOTES ...

  • Black Box IC165A - page 34

    1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746 © Copyright 2000. Black Box Corporation. All rights reserved. ...

メーカー Black Box カテゴリー Switch

Black Box IC165Aのメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- IC165Aの取扱説明書
- Black Boxの製品カード
- パンフレット
- またはBlack Box IC165Aの消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Black Box IC165Aの取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Black Box IC165Aの取り付け説明書、サービスマニュアル、簡易説明書、またはBlack Box IC165Aのユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Black Box IC165Aの製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Black Box IC165Aデバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがBlack Box IC165Aを使用するのを助ける技術的文書のことです。説明書は通常、全てのBlack Box IC165Aユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Black Boxの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Black Box IC165Aの説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははBlack Box IC165Aの目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Black Box IC165Aに関してこのドキュメントで見つけることができる全てのヒントの目次
3. Black Box IC165Aデバイスの基本機能を使うにあたってのヒント。 Black Box IC165Aのユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Black Box IC165Aに関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるBlack Box IC165Aのメーカー/サービスへの連絡先に関する情報。

Black Box IC165Aについてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもBlack Box IC165Aの問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがBlack Box IC165Aで同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)