Français dropdown-ico

Manuel d’utilisation BlueWalker PowerWalker VFI 40000TP 3/3 BX

36 pages Non applicable
Télécharger

Aller à la page of 36

Summary
  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 1

    PowerW alker VFI 3/3 Series VFI 20000TP~40000TP 3/3 BX 380/400/415V 50/60Hz (3-phase input/output) User Guide ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 2

    ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 3

    EN ©2013 BlueW alker GmbH All Rights Reserved The contents of this manual are the copyright of the publisher and may not be reproduced (even extracts) unless permission granted. Every care has been taken to ensure the accuracy of the information contained in this manual, but no liability can be accepted for any errors or omission. The right to mak ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 4

    1 . Prior to the application, please read “Safety Instructions” carefully to ensure correct and safe application. Please keep the user manual properly . 2 . During operation, attention sh ould be paid to all warning sym bols and operations should be followed strictly as required. 3 . Equipment is not supposed to be used in environment that dire ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 5

    EN 3 . Replacement of accumulator batteries requires a match of same type and model with equal quantity . 4 . As accumulator batteries may contain potential electric shock and short-circuit current danger , to avoid accidents that might be thus resulted, the following warnings should be observed during battery replacement: A . Do not wear watches, ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 6

    Contents Chapter 1 Brief introduction --------------------------------------- 1.1 Product introduction -------------------------------------------------- 1.2 Frequently used symbols ---------------------------------------------- 1.3 Product standard ------------------------------------------------------- 1.4 T echnical parameters and specication ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 7

    1 EN Chapter 1 Brief introduction 1.1 Product introduction PowerW alker VFI 3/3 Series products are high-efciency and high-performance, double- conversion three phase input and three phase output UPS, unit capacity ranging between 20KV A-40KV A. Categorized by capacity , the products can be further divided into 20KV A, 30KV A and 40KV A. This se ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 8

    2 1.3 Product standard The Series products are up to the following safety standards: The Series products are up to the following level of EMC requirement: Remark: Pr oper attention should be given to all warning symbols on the equipment and no tearing or damaging of these symbols is allowed. ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 9

    3 EN Output W ire connection: three phase four wire + grounded V oltage: 380 ×(1 ± 1%) V AC or 220 ×(1 ± 1%) V AC (with balanced load) Power factor: 0.8 Frequency error: ± 8% at 50Hz (track bypass frequency input; when frequency exceeds ±8% or under the mode of battery power supply , frequency output should be ± 0.1% of the rated amount.) Ov ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 10

    4 General specications Remark: when UPS has been stor ed under a temperature of 0 ℃ or has been inactive for a long time, it is suggested that prior to start-up of UPS envir onmental temperature should be br ought back to 0 ℃ or above for 2 hours. Altitude: below 1000m Storage temperature: -25 ℃～ + 55 ℃ MODEL NO Machine size(mm) L * W ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 11

    5 EN Chapter 2 Exterior appearance Remark: prior to transportation make sur e of the height of the door and other obstacles standing in the passage. Refer to the following gur e for the dismantling of machine cabi - net: 1.Unpack and there should be: 2.1 Unpacking inspection 2. Check whether UPS is damaged during the process of transportation or ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 12

    6 EXT .BA TTERY TEMP PROBE Fan Front view Rear view SER VICE RS232 RS485 EPO AS400 Exterior gure of VFI 20000TP 3/3 BX UPS 2.2 Exterior gure LCD panel Button LED indicator light intelligent slot Extended slot P ARALLEL ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 13

    7 EN Exterior gure of VFI 30000TP 3/3 BX,VFI 40000TP 3/3 BX UPS CHGR F AN Maintenance switch Main Ⅰ Main Ⅱ（ Optional kit ） Front view (without front panel) EXT .BA TTERY TEMP PROBE FA N SER VICE RS232 RS485 EPO AS400 Front view Rear view LCD panel Button LED indicator light intelligent slot Extended slot P ARALLEL ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 14

    8 CHGR F AN Main Ⅰ Main Ⅱ（ Optional kit ） 2.3 Panel instructions ① AC: this light and inverter light will turn “green” when UPS is powered directly by AC ; ② Inverter: this light will turn “green” when UPS is loaded through the inverter; ③ Battery: this light will turn “yellow” when UPS is powered by batteries; ④ Bypass: ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 15

    9 EN ⑤ Fault: this light will turn and stay “red” with continuous warning tone being given off in case of UPS abnormal function; or ash “red” with intermittent warning tone being given off. ⑥ LCD: display UPS condition. ⑦ : Conrm/Enter; press this button to select a menu or conrm an operation. ⑧ : PageDown; press this butto ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 16

    10 Chapter 3 Installation instructions 3.1 Single machine installation 1) The installation of this unit must be performed in compliance with the electrical code by professional personnel. 2) Install the UPS in a clean and stable environment that is free of vibration, dust, high humidity , ammable gas, ammable liquid or caustic substance. 3) T ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 17

    11 EN for each group being168VDC-192VDC. Battery capacity and number of group can be se - lected at your option. Battery pack must be equipped with DC switch (it is suggested that selection of DC switch should be in line with installation drawing for wire connection). 9) Installation and wire connection diagram 10) Jumper list for the UPS 8) Brake ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 18

    12 Remark: 1. For the Series UPS, input neural line should be dir ectly connected to input “N” termi - nal of UPS wir e connection terminal bay without AC input idle-run; 2. When single-phase curr ent exceeds 100A, switches of protective atmospher e should be equipped with ar c control devices; 3. Battery positive/negative wir e size: indicates ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 19

    13 EN 1. Make sure that UPS input and output terminals are uncharged; 2. T urn off the battery switch on battery box; 3. Connect “+”, “N” and “-“ of battery to the corresponding terminal bay of UPS; 4. Use multimeter (DC V oltage) to measure the voltage of positive and negative batteries as well as positive and negative polarity . 3.3 P ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 20

    14 Chapter 4 Operation 4.1 Single machine operation 1. Make sure A, B and C phase sequences are correctly connected and then supply power to UPS. 2. T urn on the switch on battery box (make sure that the “+”, “N” and “-” of terminal bay are in accordance with those on the battery box). 3. Switch on “input breaker” (Line input breake ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 21

    15 EN 5)Press ▼ again to obtain the below 6)Press ▼ again to obtain the below information information 7)Press ▼ again to obtain the below 8)Press ▼ again to obtain the below information information VFI 20000TP 3/3 ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 22

    16 1)Switch-on picture 2)Press ENTER 3)Select “Y es, Conrm” to switch on 4)Normal Switch-on the machine Remark: when malfunction occurs, “x” will appear at the lower right corner of the pic - tur e while when warning occurs “ ” will appear at the same position (as illustrated in the below pictur e with battery mode as an example). 4. ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 23

    17 EN 5. Switch-off action (press ESC to exit above picture) 1)Switch-off picture 2)If it is in single machine mode, the following will appear 3)If it is in parallel machine mode, the 4)Press ENTER following will appear 5)Battery power supply (switch off line input breaker) ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 24

    18 6. Help 1) Help picture 2)Press ENTER on help picture Remark: If you intend to switch off only one set of UPS among the parallel machine sys - tem, select “single machine switch-off”; if switch-off is intended for the entir e parallel machine system, select “parallel machine switch-off”. 5)Select “Y es, Conrm” to switch of f 6)Nor ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 25

    19 EN 1)Setting picture (bypass power supply) 2) Press ▼ 7. Setting action (press ESC to exit the above picture) Y ou are able to access Setting picture by using user combination (default: 1234, subject to personal modication) so as to set the following programs. ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 26

    20 3)Input Password display 4)Input password and press ENTER 8. The Series is capable of DC start-up without AC input, panel display being similar to switch-on picture with AC supply . DC switch-on and off are available by following in - structions appearing in the pictures. 9. Procedures of DC switch-on: Activate DC switch-on function set under UP ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 27

    21 EN 4.2 Parallel machine operation 1. Redundancy introduction N+X is currently the most reliable power supply structure, in which N indicates the mini - mum UPS number required for the total load and X is the redundant UPS number , namely , the malfunctioning UPS number that the system can simultaneously bear . The lar ger X is, the higher reliab ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 28

    22 3. Operation instructions 1) Follow single machine operation instructions for general operation. 2) After switch to Line mode, all machines will jump to conversion mode; switch off: when switch-off is conducted under conversion mode, all machines will simultaneously switch off inverter and then convert to the bypass mode after the last machine c ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 29

    23 EN The Series provide Intelligent Slot, Expanded Slot, P ARALLEL, EXT .BA TTER Y TEMP PROBE, AS400, EPO, RS485 and RS232 as well as SER VICE Supervising Communica - tion Interface exclusively available to PowerW alker technical personnel. 1. Intelligent slot: suitable for W ebPower card (optional) of remote supervising manage - ment, enabling yo ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 30

    24 RS485 port: RS232 port: ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 31

    25 EN AS400 port: ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 32

    26 Chapter 6 T ransportation, Maintenance and T roubleshooting Remove UPS Make preparation for UPS relocation according to the following steps. Remark: special equipment (forklift) is needed for loading and unloading due to the heavy weight of UPS. 1. Switch off all equipments connected to UPS. 2. T urn off UPS AC switch and battery pack switch. 3. ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 33

    27 EN Please refer to “Light Reference T able” of this User Manual rst and then conduct proper treatment. If problems still exist, please record UPS model, serial number as well as pur - chase date, symptom on fault, light condition, LCD malfunction or warning information. T roubleshooting Should maintenance prove necessary , the following s ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 34

    28 Appendix 1 Light Reference T able Should any display or warning message excluded in the above table be found, please con - tact distributor . ● Indicator light is on ★ Indicator light ashes ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 35

    ...

  • BlueWalker PowerWalker VFI 40000TP 3/3 BX - page 36

    614-01720-00 ...

Fabricant BlueWalker Catégorie Uninterruptible power supply (

Les documents que nous recevons du fabricant de l'appareilBlueWalker PowerWalker VFI 40000TP 3/3 BX peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques BlueWalker
- manuels d’utilisations PowerWalker VFI 40000TP 3/3 BX
- fiches produit BlueWalker
- dépliants
- ou étiquettes-énergie BlueWalker PowerWalker VFI 40000TP 3/3 BX
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation BlueWalker PowerWalker VFI 40000TP 3/3 BX.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation BlueWalker PowerWalker VFI 40000TP 3/3 BX, manuels d’entretien, brefs manuels ou manuels de l’utilisateur BlueWalker PowerWalker VFI 40000TP 3/3 BX. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit BlueWalker PowerWalker VFI 40000TP 3/3 BX.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil BlueWalker PowerWalker VFI 40000TP 3/3 BX, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser BlueWalker PowerWalker VFI 40000TP 3/3 BX par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs BlueWalker PowerWalker VFI 40000TP 3/3 BX.

Le manuel d’utilisation complet BlueWalker, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel BlueWalker PowerWalker VFI 40000TP 3/3 BX - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières BlueWalker PowerWalker VFI 40000TP 3/3 BX, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBlueWalker PowerWalker VFI 40000TP 3/3 BX qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil BlueWalker PowerWalker VFI 40000TP 3/3 BX - qui devraient nous aider dans les premières étapes lors de l'utilisation BlueWalker PowerWalker VFI 40000TP 3/3 BX
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de BlueWalker PowerWalker VFI 40000TP 3/3 BX
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service BlueWalker PowerWalker VFI 40000TP 3/3 BX dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de BlueWalker PowerWalker VFI 40000TP 3/3 BX?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec BlueWalker PowerWalker VFI 40000TP 3/3 BX, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec BlueWalker PowerWalker VFI 40000TP 3/3 BX il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)