Manuel d’utilisation Siemens SE 25M250

32 pages Non applicable
Télécharger

Aller à la page of 32

Summary
  • Siemens SE 25M250 - page 1

    9000 249 195  8704      ...

  • Siemens SE 25M250 - page 2

    ...

  • Siemens SE 25M250 - page 3

    en Index Safety instructions 4 . . . . . . . . . . . . . Getting to know your appliance 6 . . W ater softener 7 . . . . . . . . . . . . . . . . Filling in the Salt 8 . . . . . . . . . . . . . . . Adding rinse aid 9 . . . . . . . . . . . . . . . Not suitable for the dishwasher 10 . . Arranging crockery , glasses, etc. in the dishwasher 1 1 . . . . . ...

  • Siemens SE 25M250 - page 4

    en 4 Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Do not use a damaged appliance, but consult your supplier . Please dispose of packaging material properly . Installation Install and connect the appliance according to the installation and assembly instructions. The ...

  • Siemens SE 25M250 - page 5

    en 5 Children in the household Do not let infants play or operate the dishwasher . Keep cleaning and rinsing agents out of the reach of infants. These may cause chemical burns in the mouth, throat and eyes or asphyxiation. Keep infants away from the open dishwasher . It could contain residue of the cleaning agent. If the appliance is installed at e ...

  • Siemens SE 25M250 - page 6

    en 6 Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front. Individual positions are referred to in the text. Control panel 1 Main switch 2 Door opener 3 Digital display/ Programme progress indicator 4 T ime delay * 5 Additional options * 6 Salt refill indicator 7 Ri ...

  • Siemens SE 25M250 - page 7

    en 7 W ater softener In order to rinse dishes and glasses satisfactorily , the dishwasher requires soft water , i.e. containing little or no lime, otherwise water stains will be left behind on crockery and glasses, etc. If the tap water exceeds a certain level of hardness, it must be softened, i.e. decalcified, so that it can be used in the dishwas ...

  • Siemens SE 25M250 - page 8

    en 8 Filling in the Salt Open the screw-type cap of the compartment 24 . W arning Before switching on the appliance for the first time, pour approx. 1 litre of water into the salt dispenser . Then refill with salt (not cooking salt) until the salt container is full (max. 1.5 kg). When you refill the salt, water is being displaced and drains of f. R ...

  • Siemens SE 25M250 - page 9

    en 9 Adding rinse aid The rinse aid is required for stain-free utensils and clear glasses. Use only rinse aid for domestic dishwashers. Open the cover on the rinse-aid dispenser 29 . T o do this, press the mark (1 ) on the cover and simultaneously lift the cover on the control plate (2 ). Carefully pour in the rinse aid to just below the edge of th ...

  • Siemens SE 25M250 - page 10

    en 10 Not suitable for the dishwasher The following should not be cleaned in the dishwasher: W ooden cutlery and utensils – these will leach out and become unsightly; even the utilised stickers are not suitable for the temperatures which occur . Sensitive ornamental glasses, craft utensil and vases, special antique or irretrievable utensils. Thes ...

  • Siemens SE 25M250 - page 11

    en 1 1 Arranging crockery , glasses, etc. in the dishwasher Loading the dishwasher Scrape of f any large amounts of left-over food. It is not necessary to rinse the dishes under running water . Place objects in the dishwasher in such a way that D items such as cups, glasses, pots/pans, etc. are stood upside down, D curved items, or those with reces ...

  • Siemens SE 25M250 - page 12

    en 12 Cutlery Cutlery should be placed in the dishwasher always unsorted and with the eating surface pointing downwards. The spray jet is then better able to reach the individual parts. T o prevent injuries, place long, pointed accessories and knives on the étagère (some models) or on the knife shelf (available as an accessory). Folding spikes * ...

  • Siemens SE 25M250 - page 13

    en 13 T op basket with upper and lower roller pairs Pull out the top basket. Remove the top basket and re-attach it to the upper or lower rollers. T op basket with side levers (Rackmatic) Pull out the top basket. T o lower the basket, press in succession the two levers on the left and right sides of the basket. Always take hold of the side of the b ...

  • Siemens SE 25M250 - page 14

    en 14 Baking sheet spray head * * some models Y ou can clean large baking sheets or grilles with the baking sheet spray head. T o do this, remove the top basket and insert the spray head as illustrated in the diagram. T o ensure that the spray jet can reach all parts, arrange the baking sheets as illustrated (max. 4 baking sheets and 2 grilles). No ...

  • Siemens SE 25M250 - page 15

    en 15 Detergent compartment with measuring marks The side of the detergent compartment is marked with lines to help you determine how much powder to add. The capacity of the detergent container is 15 ml up to the bottom line and 25 ml up to the middle line. When the compartment is full it contains 40 ml. If the detergent dispenser 30 is still close ...

  • Siemens SE 25M250 - page 16

    en 16 auto 3in1 The use of so-called combined detergent products may make the use of rinse aid and/or salt unnecessary . There are currently several types of combined detergent products available. 2in1: They contain detergent and rinse aid or salt function. 3in1: They contain detergent, rinse aid and salt function. 4in1 : They contain a detergent, ...

  • Siemens SE 25M250 - page 17

    en 17 Switching the salt refill indicator / water softening system off and on Close the door . Hold down the programme button B and switch on the main switch 1 , then release the buttons. The illuminated button B and the factory-set value on the digital display flash. T o change the setting: press the programme button B . Each time the button is pr ...

  • Siemens SE 25M250 - page 18

    en 18 Overview of programmes The max. possible number of programmes is illustrated in this overview . The corresponding programmes for your appliance can be found on the fascia. Cof fee, cake, milk, sausage, cold drinks, salads Soups, souf flés, potatoes, pastries, rice, eggs, fried food Delicate T ype of Dishes e.g. porcelain, pans, cutlery , gla ...

  • Siemens SE 25M250 - page 19

    en 19 W ashing dishes Reduce costs! If only a small number of dishes have been loaded into the dishwasher , selecting a programme that operates at the next lowest temperature will usually suf fice. Programme data The programme specifications can be found in the summary of instructions. Programme specifications refer to normal conditions. Greater de ...

  • Siemens SE 25M250 - page 20

    en 20 Switching the dishwasher OFF Several minutes after the programme has ended: Set the main switch 1 to OFF . T urn the water tap of f. (Does not apply when Aqua-Stop unit has been fitted) Remove dishes, etc. when they have cooled down. Interrupting the programme Set main switch 1 to OFF . Indicator lights extinguish. The programme is retained i ...

  • Siemens SE 25M250 - page 21

    en 21 Additional functions * on some models additional functions 5 can be set with the buttons. Half load* If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “Half load”. The “half load” additional function saves water , energy and time. It is recommended to put a little less detergent in the detergent disp ...

  • Siemens SE 25M250 - page 22

    en 22 Filters The filters 25 prevent larger remnants of food or other objects from getting inside the pump. This residue can occasionally clog up the filters. The filter system consists of a filter cylinder , a flat fine filter and, depending on the model, a microfilter (*). Inspect the filters for obstructions every time the dishwasher has been us ...

  • Siemens SE 25M250 - page 23

    en 23 Spray arms Lime and remnants of food in the washing water can block the nozzles in the spray arms 22 and 23 and the arm mountings . Inspect the nozzles in the spray arms for blocked holes due to remnants of food. If necessary , pull the lower arm 23 upwards and lift it of f. Unscrew the upper spray arm 22 . Clean both spray arms under running ...

  • Siemens SE 25M250 - page 24

    en 24 Fault finding Resolving minor problems yourself Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having to call out a service engineer . Not only does this save costs, but it also means that the appliance is available for use again that much sooner . The following list of common oc ...

  • Siemens SE 25M250 - page 25

    en 25 Refill display does not light up. Rinse aid refill indicator switched of f. (see auto 3in1 chapter) Salt refill indicator switched of f. (see auto 3in1 chapter) W ater remains inside appliance after programme has ended Blockage or kink in drainage hose. Pump is jammed. Filters are blocked. The programme is still running. W ait for the program ...

  • Siemens SE 25M250 - page 26

    en 26 Glasses have a dull appearance Amount of rinse-aid was set too low . T ea stains or traces of lipstick have not been completely removed Detergent does not have a suf ficient bleaching ef fect. W ashing temperature was set too low . T races of rust on cutlery Cutlery is not suf ficiently rustproof. Salt content in washing water is too high. Li ...

  • Siemens SE 25M250 - page 27

    en 27 Information Notes on comparison tests Y ou will find details of the conditions for the comparison tests on the additional ”Notes on comparison tests” sheet. The consumption values for the relevant programmes are given in the introduction. General Built-under and integrated appliances which are subsequently installed as free-standing appli ...

  • Siemens SE 25M250 - page 28

    en 28 Fresh water connection Using the enclosed parts, connect the fresh water connection to the tap according to the installation instructions. Ensure that the fresh water connection is not kinked, crushed or twisted. When replacing the appliance, always connect a new water supply hose to the water supply . The old supply hose must not be re-used. ...

  • Siemens SE 25M250 - page 29

    en 29 W aste disposal Disposal Old appliances are not worthless rubbish. V aluable raw materials can be reclaimed by recycling old appliances. Pull out the mains plug of the redundant appliance. Cut of f the power cord and discard with mains plug. T o prevent children from locking themselves in the appliance and suf focating, destroy the door lock ...

  • Siemens SE 25M250 - page 30

    en 30 en Subjekt to modification ...

  • Siemens SE 25M250 - page 31

    pt 29 ...

  • Siemens SE 25M250 - page 32

    $ - ''$),                 ...

Fabricant Siemens Catégorie Dishwasher

Les documents que nous recevons du fabricant de l'appareilSiemens SE 25M250 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Siemens
- manuels d’utilisations SE 25M250
- fiches produit Siemens
- dépliants
- ou étiquettes-énergie Siemens SE 25M250
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Siemens SE 25M250.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Siemens SE 25M250, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Siemens SE 25M250. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Siemens SE 25M250.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Siemens SE 25M250, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Siemens SE 25M250 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Siemens SE 25M250.

Le manuel d’utilisation complet Siemens, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Siemens SE 25M250 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Siemens SE 25M250, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSiemens SE 25M250 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Siemens SE 25M250 - qui devraient nous aider dans les premières étapes lors de l'utilisation Siemens SE 25M250
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Siemens SE 25M250
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Siemens SE 25M250 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Siemens SE 25M250?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Siemens SE 25M250, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Siemens SE 25M250 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)