Siemens SE 25M250の取扱説明書

32ページ 関係なし
ダウンロード

ページに移動 of 32

Summary
  • Siemens SE 25M250 - page 1

    9000 249 195  8704      ...

  • Siemens SE 25M250 - page 2

    ...

  • Siemens SE 25M250 - page 3

    en Index Safety instructions 4 . . . . . . . . . . . . . Getting to know your appliance 6 . . W ater softener 7 . . . . . . . . . . . . . . . . Filling in the Salt 8 . . . . . . . . . . . . . . . Adding rinse aid 9 . . . . . . . . . . . . . . . Not suitable for the dishwasher 10 . . Arranging crockery , glasses, etc. in the dishwasher 1 1 . . . . . ...

  • Siemens SE 25M250 - page 4

    en 4 Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Do not use a damaged appliance, but consult your supplier . Please dispose of packaging material properly . Installation Install and connect the appliance according to the installation and assembly instructions. The ...

  • Siemens SE 25M250 - page 5

    en 5 Children in the household Do not let infants play or operate the dishwasher . Keep cleaning and rinsing agents out of the reach of infants. These may cause chemical burns in the mouth, throat and eyes or asphyxiation. Keep infants away from the open dishwasher . It could contain residue of the cleaning agent. If the appliance is installed at e ...

  • Siemens SE 25M250 - page 6

    en 6 Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front. Individual positions are referred to in the text. Control panel 1 Main switch 2 Door opener 3 Digital display/ Programme progress indicator 4 T ime delay * 5 Additional options * 6 Salt refill indicator 7 Ri ...

  • Siemens SE 25M250 - page 7

    en 7 W ater softener In order to rinse dishes and glasses satisfactorily , the dishwasher requires soft water , i.e. containing little or no lime, otherwise water stains will be left behind on crockery and glasses, etc. If the tap water exceeds a certain level of hardness, it must be softened, i.e. decalcified, so that it can be used in the dishwas ...

  • Siemens SE 25M250 - page 8

    en 8 Filling in the Salt Open the screw-type cap of the compartment 24 . W arning Before switching on the appliance for the first time, pour approx. 1 litre of water into the salt dispenser . Then refill with salt (not cooking salt) until the salt container is full (max. 1.5 kg). When you refill the salt, water is being displaced and drains of f. R ...

  • Siemens SE 25M250 - page 9

    en 9 Adding rinse aid The rinse aid is required for stain-free utensils and clear glasses. Use only rinse aid for domestic dishwashers. Open the cover on the rinse-aid dispenser 29 . T o do this, press the mark (1 ) on the cover and simultaneously lift the cover on the control plate (2 ). Carefully pour in the rinse aid to just below the edge of th ...

  • Siemens SE 25M250 - page 10

    en 10 Not suitable for the dishwasher The following should not be cleaned in the dishwasher: W ooden cutlery and utensils – these will leach out and become unsightly; even the utilised stickers are not suitable for the temperatures which occur . Sensitive ornamental glasses, craft utensil and vases, special antique or irretrievable utensils. Thes ...

  • Siemens SE 25M250 - page 11

    en 1 1 Arranging crockery , glasses, etc. in the dishwasher Loading the dishwasher Scrape of f any large amounts of left-over food. It is not necessary to rinse the dishes under running water . Place objects in the dishwasher in such a way that D items such as cups, glasses, pots/pans, etc. are stood upside down, D curved items, or those with reces ...

  • Siemens SE 25M250 - page 12

    en 12 Cutlery Cutlery should be placed in the dishwasher always unsorted and with the eating surface pointing downwards. The spray jet is then better able to reach the individual parts. T o prevent injuries, place long, pointed accessories and knives on the étagère (some models) or on the knife shelf (available as an accessory). Folding spikes * ...

  • Siemens SE 25M250 - page 13

    en 13 T op basket with upper and lower roller pairs Pull out the top basket. Remove the top basket and re-attach it to the upper or lower rollers. T op basket with side levers (Rackmatic) Pull out the top basket. T o lower the basket, press in succession the two levers on the left and right sides of the basket. Always take hold of the side of the b ...

  • Siemens SE 25M250 - page 14

    en 14 Baking sheet spray head * * some models Y ou can clean large baking sheets or grilles with the baking sheet spray head. T o do this, remove the top basket and insert the spray head as illustrated in the diagram. T o ensure that the spray jet can reach all parts, arrange the baking sheets as illustrated (max. 4 baking sheets and 2 grilles). No ...

  • Siemens SE 25M250 - page 15

    en 15 Detergent compartment with measuring marks The side of the detergent compartment is marked with lines to help you determine how much powder to add. The capacity of the detergent container is 15 ml up to the bottom line and 25 ml up to the middle line. When the compartment is full it contains 40 ml. If the detergent dispenser 30 is still close ...

  • Siemens SE 25M250 - page 16

    en 16 auto 3in1 The use of so-called combined detergent products may make the use of rinse aid and/or salt unnecessary . There are currently several types of combined detergent products available. 2in1: They contain detergent and rinse aid or salt function. 3in1: They contain detergent, rinse aid and salt function. 4in1 : They contain a detergent, ...

  • Siemens SE 25M250 - page 17

    en 17 Switching the salt refill indicator / water softening system off and on Close the door . Hold down the programme button B and switch on the main switch 1 , then release the buttons. The illuminated button B and the factory-set value on the digital display flash. T o change the setting: press the programme button B . Each time the button is pr ...

  • Siemens SE 25M250 - page 18

    en 18 Overview of programmes The max. possible number of programmes is illustrated in this overview . The corresponding programmes for your appliance can be found on the fascia. Cof fee, cake, milk, sausage, cold drinks, salads Soups, souf flés, potatoes, pastries, rice, eggs, fried food Delicate T ype of Dishes e.g. porcelain, pans, cutlery , gla ...

  • Siemens SE 25M250 - page 19

    en 19 W ashing dishes Reduce costs! If only a small number of dishes have been loaded into the dishwasher , selecting a programme that operates at the next lowest temperature will usually suf fice. Programme data The programme specifications can be found in the summary of instructions. Programme specifications refer to normal conditions. Greater de ...

  • Siemens SE 25M250 - page 20

    en 20 Switching the dishwasher OFF Several minutes after the programme has ended: Set the main switch 1 to OFF . T urn the water tap of f. (Does not apply when Aqua-Stop unit has been fitted) Remove dishes, etc. when they have cooled down. Interrupting the programme Set main switch 1 to OFF . Indicator lights extinguish. The programme is retained i ...

  • Siemens SE 25M250 - page 21

    en 21 Additional functions * on some models additional functions 5 can be set with the buttons. Half load* If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “Half load”. The “half load” additional function saves water , energy and time. It is recommended to put a little less detergent in the detergent disp ...

  • Siemens SE 25M250 - page 22

    en 22 Filters The filters 25 prevent larger remnants of food or other objects from getting inside the pump. This residue can occasionally clog up the filters. The filter system consists of a filter cylinder , a flat fine filter and, depending on the model, a microfilter (*). Inspect the filters for obstructions every time the dishwasher has been us ...

  • Siemens SE 25M250 - page 23

    en 23 Spray arms Lime and remnants of food in the washing water can block the nozzles in the spray arms 22 and 23 and the arm mountings . Inspect the nozzles in the spray arms for blocked holes due to remnants of food. If necessary , pull the lower arm 23 upwards and lift it of f. Unscrew the upper spray arm 22 . Clean both spray arms under running ...

  • Siemens SE 25M250 - page 24

    en 24 Fault finding Resolving minor problems yourself Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having to call out a service engineer . Not only does this save costs, but it also means that the appliance is available for use again that much sooner . The following list of common oc ...

  • Siemens SE 25M250 - page 25

    en 25 Refill display does not light up. Rinse aid refill indicator switched of f. (see auto 3in1 chapter) Salt refill indicator switched of f. (see auto 3in1 chapter) W ater remains inside appliance after programme has ended Blockage or kink in drainage hose. Pump is jammed. Filters are blocked. The programme is still running. W ait for the program ...

  • Siemens SE 25M250 - page 26

    en 26 Glasses have a dull appearance Amount of rinse-aid was set too low . T ea stains or traces of lipstick have not been completely removed Detergent does not have a suf ficient bleaching ef fect. W ashing temperature was set too low . T races of rust on cutlery Cutlery is not suf ficiently rustproof. Salt content in washing water is too high. Li ...

  • Siemens SE 25M250 - page 27

    en 27 Information Notes on comparison tests Y ou will find details of the conditions for the comparison tests on the additional ”Notes on comparison tests” sheet. The consumption values for the relevant programmes are given in the introduction. General Built-under and integrated appliances which are subsequently installed as free-standing appli ...

  • Siemens SE 25M250 - page 28

    en 28 Fresh water connection Using the enclosed parts, connect the fresh water connection to the tap according to the installation instructions. Ensure that the fresh water connection is not kinked, crushed or twisted. When replacing the appliance, always connect a new water supply hose to the water supply . The old supply hose must not be re-used. ...

  • Siemens SE 25M250 - page 29

    en 29 W aste disposal Disposal Old appliances are not worthless rubbish. V aluable raw materials can be reclaimed by recycling old appliances. Pull out the mains plug of the redundant appliance. Cut of f the power cord and discard with mains plug. T o prevent children from locking themselves in the appliance and suf focating, destroy the door lock ...

  • Siemens SE 25M250 - page 30

    en 30 en Subjekt to modification ...

  • Siemens SE 25M250 - page 31

    pt 29 ...

  • Siemens SE 25M250 - page 32

    $ - ''$),                 ...

メーカー Siemens カテゴリー Dishwasher

Siemens SE 25M250のメーカーから受け取ることができるドキュメントは、いくつかのグループに分けられます。その一部は次の通りです:
- #BRANDの図面#
- SE 25M250の取扱説明書
- Siemensの製品カード
- パンフレット
- またはSiemens SE 25M250の消費電力シール
それらは全部重要ですが、デバイス使用の観点から最も重要な情報は、Siemens SE 25M250の取扱説明書に含まれています。

取扱説明書と呼ばれる文書のグループは、Siemens SE 25M250の取り付け説明書、サービスマニュアル、簡易説明書、またはSiemens SE 25M250のユーザーマニュアル等、より具体的なカテゴリーに分類されます。ご必要に応じてドキュメントを検索しましょう。私たちのウェブサイトでは、Siemens SE 25M250の製品を使用するにあたって最も人気のある説明書を閲覧できます。

関連する取扱説明書

Siemens SE 25M250デバイスの取扱説明書はどのようなものですか?
取扱説明書は、ユーザーマニュアル又は単に「マニュアル」とも呼ばれ、ユーザーがSiemens SE 25M250を使用するのを助ける技術的文書のことです。説明書は通常、全てのSiemens SE 25M250ユーザーが容易に理解できる文章にて書かれており、その作成者はその分野の専門家です。

Siemensの取扱説明書には、基本的な要素が記載されているはずです。その一部は、カバー/タイトルページ、著作権ページ等、比較的重要度の低いものです。ですが、その他の部分には、ユーザーにとって重要な情報が記載されているはずです。

1. Siemens SE 25M250の説明書の概要と使用方法。説明書にはまず、その閲覧方法に関する手引きが書かれているはずです。そこにははSiemens SE 25M250の目次に関する情報やよくある質問、最も一般的な問題に関する情報を見つけられるはずです。つまり、それらはユーザーが取扱説明書に最も期待する情報なのです。
2. 目次。Siemens SE 25M250に関してこのドキュメントで見つけることができる全てのヒントの目次
3. Siemens SE 25M250デバイスの基本機能を使うにあたってのヒント。 Siemens SE 25M250のユーザーが使い始めるのを助けてくれるはずです。
4. トラブルシューティング。Siemens SE 25M250に関する最も重要な問題を診断し、解決するために役立つ体系化された手続き
5. FAQ。よくある質問
6. 連絡先。一人では問題を解決できない場合に、その国におけるSiemens SE 25M250のメーカー/サービスへの連絡先に関する情報。

Siemens SE 25M250についてご質問がありますか?

次のフォームを使用してください

見つけた説明書を読んでもSiemens SE 25M250の問題を解決できない場合、下記のフォームを使用して質問をしましょう。ユーザーのどなたかがSiemens SE 25M250で同様の問題を抱えていた場合、その解決方法を共有したいと考えるかもしれません。

画像のテキストを入力してください

コメント (0)