-
Siemens SE 25M250 - page 1
9000 249 195 8704 ...
-
Siemens SE 25M250 - page 2
...
-
Siemens SE 25M250 - page 3
en Index Safety instructions 4 . . . . . . . . . . . . . Getting to know your appliance 6 . . W ater softener 7 . . . . . . . . . . . . . . . . Filling in the Salt 8 . . . . . . . . . . . . . . . Adding rinse aid 9 . . . . . . . . . . . . . . . Not suitable for the dishwasher 10 . . Arranging crockery , glasses, etc. in the dishwasher 1 1 . . . . . ...
-
Siemens SE 25M250 - page 4
en 4 Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Do not use a damaged appliance, but consult your supplier . Please dispose of packaging material properly . Installation Install and connect the appliance according to the installation and assembly instructions. The ...
-
Siemens SE 25M250 - page 5
en 5 Children in the household Do not let infants play or operate the dishwasher . Keep cleaning and rinsing agents out of the reach of infants. These may cause chemical burns in the mouth, throat and eyes or asphyxiation. Keep infants away from the open dishwasher . It could contain residue of the cleaning agent. If the appliance is installed at e ...
-
Siemens SE 25M250 - page 6
en 6 Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front. Individual positions are referred to in the text. Control panel 1 Main switch 2 Door opener 3 Digital display/ Programme progress indicator 4 T ime delay * 5 Additional options * 6 Salt refill indicator 7 Ri ...
-
Siemens SE 25M250 - page 7
en 7 W ater softener In order to rinse dishes and glasses satisfactorily , the dishwasher requires soft water , i.e. containing little or no lime, otherwise water stains will be left behind on crockery and glasses, etc. If the tap water exceeds a certain level of hardness, it must be softened, i.e. decalcified, so that it can be used in the dishwas ...
-
Siemens SE 25M250 - page 8
en 8 Filling in the Salt Open the screw-type cap of the compartment 24 . W arning Before switching on the appliance for the first time, pour approx. 1 litre of water into the salt dispenser . Then refill with salt (not cooking salt) until the salt container is full (max. 1.5 kg). When you refill the salt, water is being displaced and drains of f. R ...
-
Siemens SE 25M250 - page 9
en 9 Adding rinse aid The rinse aid is required for stain-free utensils and clear glasses. Use only rinse aid for domestic dishwashers. Open the cover on the rinse-aid dispenser 29 . T o do this, press the mark (1 ) on the cover and simultaneously lift the cover on the control plate (2 ). Carefully pour in the rinse aid to just below the edge of th ...
-
Siemens SE 25M250 - page 10
en 10 Not suitable for the dishwasher The following should not be cleaned in the dishwasher: W ooden cutlery and utensils – these will leach out and become unsightly; even the utilised stickers are not suitable for the temperatures which occur . Sensitive ornamental glasses, craft utensil and vases, special antique or irretrievable utensils. Thes ...
-
Siemens SE 25M250 - page 11
en 1 1 Arranging crockery , glasses, etc. in the dishwasher Loading the dishwasher Scrape of f any large amounts of left-over food. It is not necessary to rinse the dishes under running water . Place objects in the dishwasher in such a way that D items such as cups, glasses, pots/pans, etc. are stood upside down, D curved items, or those with reces ...
-
Siemens SE 25M250 - page 12
en 12 Cutlery Cutlery should be placed in the dishwasher always unsorted and with the eating surface pointing downwards. The spray jet is then better able to reach the individual parts. T o prevent injuries, place long, pointed accessories and knives on the étagère (some models) or on the knife shelf (available as an accessory). Folding spikes * ...
-
Siemens SE 25M250 - page 13
en 13 T op basket with upper and lower roller pairs Pull out the top basket. Remove the top basket and re-attach it to the upper or lower rollers. T op basket with side levers (Rackmatic) Pull out the top basket. T o lower the basket, press in succession the two levers on the left and right sides of the basket. Always take hold of the side of the b ...
-
Siemens SE 25M250 - page 14
en 14 Baking sheet spray head * * some models Y ou can clean large baking sheets or grilles with the baking sheet spray head. T o do this, remove the top basket and insert the spray head as illustrated in the diagram. T o ensure that the spray jet can reach all parts, arrange the baking sheets as illustrated (max. 4 baking sheets and 2 grilles). No ...
-
Siemens SE 25M250 - page 15
en 15 Detergent compartment with measuring marks The side of the detergent compartment is marked with lines to help you determine how much powder to add. The capacity of the detergent container is 15 ml up to the bottom line and 25 ml up to the middle line. When the compartment is full it contains 40 ml. If the detergent dispenser 30 is still close ...
-
Siemens SE 25M250 - page 16
en 16 auto 3in1 The use of so-called combined detergent products may make the use of rinse aid and/or salt unnecessary . There are currently several types of combined detergent products available. 2in1: They contain detergent and rinse aid or salt function. 3in1: They contain detergent, rinse aid and salt function. 4in1 : They contain a detergent, ...
-
Siemens SE 25M250 - page 17
en 17 Switching the salt refill indicator / water softening system off and on Close the door . Hold down the programme button B and switch on the main switch 1 , then release the buttons. The illuminated button B and the factory-set value on the digital display flash. T o change the setting: press the programme button B . Each time the button is pr ...
-
Siemens SE 25M250 - page 18
en 18 Overview of programmes The max. possible number of programmes is illustrated in this overview . The corresponding programmes for your appliance can be found on the fascia. Cof fee, cake, milk, sausage, cold drinks, salads Soups, souf flés, potatoes, pastries, rice, eggs, fried food Delicate T ype of Dishes e.g. porcelain, pans, cutlery , gla ...
-
Siemens SE 25M250 - page 19
en 19 W ashing dishes Reduce costs! If only a small number of dishes have been loaded into the dishwasher , selecting a programme that operates at the next lowest temperature will usually suf fice. Programme data The programme specifications can be found in the summary of instructions. Programme specifications refer to normal conditions. Greater de ...
-
Siemens SE 25M250 - page 20
en 20 Switching the dishwasher OFF Several minutes after the programme has ended: Set the main switch 1 to OFF . T urn the water tap of f. (Does not apply when Aqua-Stop unit has been fitted) Remove dishes, etc. when they have cooled down. Interrupting the programme Set main switch 1 to OFF . Indicator lights extinguish. The programme is retained i ...
-
Siemens SE 25M250 - page 21
en 21 Additional functions * on some models additional functions 5 can be set with the buttons. Half load* If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “Half load”. The “half load” additional function saves water , energy and time. It is recommended to put a little less detergent in the detergent disp ...
-
Siemens SE 25M250 - page 22
en 22 Filters The filters 25 prevent larger remnants of food or other objects from getting inside the pump. This residue can occasionally clog up the filters. The filter system consists of a filter cylinder , a flat fine filter and, depending on the model, a microfilter (*). Inspect the filters for obstructions every time the dishwasher has been us ...
-
Siemens SE 25M250 - page 23
en 23 Spray arms Lime and remnants of food in the washing water can block the nozzles in the spray arms 22 and 23 and the arm mountings . Inspect the nozzles in the spray arms for blocked holes due to remnants of food. If necessary , pull the lower arm 23 upwards and lift it of f. Unscrew the upper spray arm 22 . Clean both spray arms under running ...
-
Siemens SE 25M250 - page 24
en 24 Fault finding Resolving minor problems yourself Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having to call out a service engineer . Not only does this save costs, but it also means that the appliance is available for use again that much sooner . The following list of common oc ...
-
Siemens SE 25M250 - page 25
en 25 Refill display does not light up. Rinse aid refill indicator switched of f. (see auto 3in1 chapter) Salt refill indicator switched of f. (see auto 3in1 chapter) W ater remains inside appliance after programme has ended Blockage or kink in drainage hose. Pump is jammed. Filters are blocked. The programme is still running. W ait for the program ...
-
Siemens SE 25M250 - page 26
en 26 Glasses have a dull appearance Amount of rinse-aid was set too low . T ea stains or traces of lipstick have not been completely removed Detergent does not have a suf ficient bleaching ef fect. W ashing temperature was set too low . T races of rust on cutlery Cutlery is not suf ficiently rustproof. Salt content in washing water is too high. Li ...
-
Siemens SE 25M250 - page 27
en 27 Information Notes on comparison tests Y ou will find details of the conditions for the comparison tests on the additional ”Notes on comparison tests” sheet. The consumption values for the relevant programmes are given in the introduction. General Built-under and integrated appliances which are subsequently installed as free-standing appli ...
-
Siemens SE 25M250 - page 28
en 28 Fresh water connection Using the enclosed parts, connect the fresh water connection to the tap according to the installation instructions. Ensure that the fresh water connection is not kinked, crushed or twisted. When replacing the appliance, always connect a new water supply hose to the water supply . The old supply hose must not be re-used. ...
-
Siemens SE 25M250 - page 29
en 29 W aste disposal Disposal Old appliances are not worthless rubbish. V aluable raw materials can be reclaimed by recycling old appliances. Pull out the mains plug of the redundant appliance. Cut of f the power cord and discard with mains plug. T o prevent children from locking themselves in the appliance and suf focating, destroy the door lock ...
-
Siemens SE 25M250 - page 30
en 30 en Subjekt to modification ...
-
Siemens SE 25M250 - page 31
pt 29 ...
-
Siemens SE 25M250 - page 32
$ - ''$), ...
Do you have a question concerning Siemens SE 25M250?
Use the form below
If you did not solve your problem by using a manual Siemens SE 25M250, ask a question using the form below. If a user had a similar problem with Siemens SE 25M250 it is likely that he will want to share the way to solve it.