Français dropdown-ico

Manuel d’utilisation Buffalo Tools GEN154

24 pages 1.99 mb
Télécharger

Aller à la page of 24

Summary
  • Buffalo Tools GEN154 - page 1

    GEN154 2000 Surge Watts / 1500 Running Watts PORTABLE GENERATOR INSTRUCTION MANUAL READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These in structions are not meant to cover every possible ...

  • Buffalo Tools GEN154 - page 2

    GEN154 2000 Surge Watts / 1500 Running Watts Portable Generator FEATURES: • 4-Stroke OHV Engine • Recoil Start • 2.4 HP Gasoline Engine • Automatic Low Oil Shutdown • 1 - 120 Volt A/C Outlet • 1 - 12 Volt D/C Outlet • 1.8 Gallon Fuel Tank • Engine Run Time: 9 Hours @ 50% Load • 2000 Surge Watts / 1500 Running Watts • EPA Approve ...

  • Buffalo Tools GEN154 - page 3

    GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 3 TABLE OF CONTENTS RECOGNIZE SAFETY SYMBOL S, WORDS AN D LABELS..................................................................................... ......... 4 PACKAGE CONTENTS PACKAGE CONTEN TS ........................................................................................... ...

  • Buffalo Tools GEN154 - page 4

    RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS What You Need to Know About Safety Instructions Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when operating or cleaning tools and equipment. Always contact yo ...

  • Buffalo Tools GEN154 - page 5

    Notice Regarding Emissions: Engines certified to comply with California and U.S. EPA emissi on regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gasoline and may include the following emission c ontrol systems: Three-Way Catalyst (TWC) (if equipped), and E ngine Modifications (EM). Legal Requirements: Fede ...

  • Buffalo Tools GEN154 - page 6

    Powerful Voltage: This generator produces powerful voltage, which can result in electrocution. • ALWAYS ground this generator before using it. (See “Ground the Generator” section in this manual). • Only electrical devices should be plugged in to this generator, either directly or with an extension cord. NEVER connect a bui lding electrical ...

  • Buffalo Tools GEN154 - page 7

    GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 7 ...

  • Buffalo Tools GEN154 - page 8

    In addition to the previously described safety information, fam iliarize yourself with all safety and hazard placards on this ge nerator. GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 8 ...

  • Buffalo Tools GEN154 - page 9

    PACKAGE CONTENTS The following items are supplied with this Model GEN154 2000 Sur ge Watts / 1500 Running Watts Portable Generator. Verify that a ll items are included. STOP! If there are missing items, call 1-888-287-6981, Monday - Friday, 8 AM - 4 PM Central Time for customer service. DO NOT RETURN THIS GENERATOR TO THE RETAILER. Item List: NEMA ...

  • Buffalo Tools GEN154 - page 10

    GENERATOR COMPONENTS Observe the locations and functions of the various components and controls of this generator. 1 1) Fuel Tank Cap 2) Control Panel 3) Grounding Terminal 4) Oil Access 5) Recoil Starter 6) Carburetor Choke Lever 7) Fuel Cock 2 3 5 6 7 8) Ignition Switch 9) DC Circuit Fuse 10) AC Circuit Fuse 11) 120 Volt AC Output Socket 12) 12 V ...

  • Buffalo Tools GEN154 - page 11

    PREPARING THE GENERATOR FOR USE Using this Generator for the First-Time STOP! The following section describes the required steps for preparing this generator for the first use. Failure to correctly perform these steps can damage this generator and/or shorten its life. If still unsur e about how to perform any of these steps after reading this s ect ...

  • Buffalo Tools GEN154 - page 12

    Step 2 - Add Gasoline Gasoline and gasoline fumes are highly flammable and explosive. Handling fuel can result in serious injury or burns. • Do not fill the fuel tank near a heat, sparks or an open flame. Keep gasoline away from appliance pilot lights, barbecues, el ectric appliances, power tools, etc. • Do not overfill the fuel tank. Always ch ...

  • Buffalo Tools GEN154 - page 13

    Subsequent Use of this Generator For subsequent uses of this generator after the first use, certain steps still must be completed to prepare it for operation. IMPORTANT: Be familiar with the procedures described in the previous section titled “Using the Generator for the First Time” of this manual. If not, review this section now. Step 1 - Veri ...

  • Buffalo Tools GEN154 - page 14

    STARTING THE GENERATOR STOP! Before starting this generator, confirm that all the steps in the section titled, “Preparing the Generator for Use,” of this ma nual have been correctly completed. If unsure about how to perform any of these steps, call 1-888-287-6981, Monday - Friday, 8 AM - 4 PM Centr al Time for customer service. Disconnect all e ...

  • Buffalo Tools GEN154 - page 15

    USING THE GENERATOR • USE THIS GENERATOR ONLY OUTDOORS IN NON-CONFINED AREAS. DO NOT SECURE THE GENERATOR WITH A CHAIN OR ROPE, AS THIS WILL MAKE IT DIFFICULT TO MOVE IN AN EMERGENCY. • Keep at least several feet of clearance on all si des to allow proper ventilation for this generator. After the engine has been running for several minutes, ele ...

  • Buffalo Tools GEN154 - page 16

    Connect only electrical devices that are in good working order. Faulty devices or power cords present the risk of electrical sh ock. Immediately turn off and disconnect any d evice that commences to operate abnormally, sl uggish or abruptly stops. Determine if t he problem was the device or the rated load cap acity of this generator has been exceed ...

  • Buffalo Tools GEN154 - page 17

    SOME NOTES ABOUT POWER CORDS Long or thin cords can require more wattage from a generator to power an electrical device. Figure 6 shows the recommended cord s according to the power requirement of the electrical device. When using cord s that exceed these specifications, allow for the electrical dev ice to have a slightly higher rated wattage requi ...

  • Buffalo Tools GEN154 - page 18

    STOPPING THE GENERATOR To stop this generator: 1. Turn off all connected electrical devices and then unplug them. 2. Switch the circuit breaker to the “OFF” position. 3. Allow this generator to run for several more minutes with no electrical devices connected to help stabilize the temperature of this generator. 4. Set the engine switch to the ? ...

  • Buffalo Tools GEN154 - page 19

    Checking the Oil Level It is important to check the oil level in the engine crankcase before each use to ensure that there is a sufficient quantity. To check the oil level: 1. Verify that this generator is shut down and on a level surface. 2. Unscrew the oil filler/dipstick cap from the engine. 3. With a dry cloth, wipe the oil off of the dipstick ...

  • Buffalo Tools GEN154 - page 20

    Air Filter Maintenance Routine maintenance of the air filter helps maintain proper airflow to the carburetor. Occasionally verify that the air filter is free of excessive dirt. The air filter will require more frequent cleaning when oper ating this generator in extremely dusty areas. To clean air filter, remove from generator. Wash in kerosene. Pou ...

  • Buffalo Tools GEN154 - page 21

    STORAGE/TRANSPORT PROCEDURES Never place any type of storage cover on this generator while it is still hot. When transporting or storing this generator for extended time: • Allow generator to fully cool before moving it. A hot engi ne and exhaust system can burn you and ignite some materials. • Empty the fuel tank. (See “Emptying the F uel Ta ...

  • Buffalo Tools GEN154 - page 22

    GEN154 2000 SURGE WATTS / 1500 RUNNING WATTS PORTABLE GENERATOR PARTS DIAGRAM GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 22 ...

  • Buffalo Tools GEN154 - page 23

    GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 23 GEN154 2000 SURGE WATTS / 1500 RUNNING WATTS PORTABLE GENERATOR PARTS LIST No. Part Name Part Number Qty No. Part Name Part Number Qty 1 Bolt GB5789 M5*8 2 46 Washer GB95 8 2 2 Absorber Set GR1000 A-04.00 2 47 Nut GB/T6184 M8 2 3 Control Panel GR1000 A-05.00 1 48 Cover 1 4 Cover 2 49 ...

  • Buffalo Tools GEN154 - page 24

    GEN1540809 GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 24 ...

Fabricant Buffalo Tools Catégorie Portable Generator

Les documents que nous recevons du fabricant de l'appareilBuffalo Tools GEN154 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Buffalo Tools
- manuels d’utilisations GEN154
- fiches produit Buffalo Tools
- dépliants
- ou étiquettes-énergie Buffalo Tools GEN154
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Buffalo Tools GEN154.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Buffalo Tools GEN154, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Buffalo Tools GEN154. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Buffalo Tools GEN154.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Buffalo Tools GEN154, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Buffalo Tools GEN154 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Buffalo Tools GEN154.

Le manuel d’utilisation complet Buffalo Tools, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Buffalo Tools GEN154 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Buffalo Tools GEN154, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lBuffalo Tools GEN154 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Buffalo Tools GEN154 - qui devraient nous aider dans les premières étapes lors de l'utilisation Buffalo Tools GEN154
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Buffalo Tools GEN154
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Buffalo Tools GEN154 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Buffalo Tools GEN154?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Buffalo Tools GEN154, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Buffalo Tools GEN154 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Captcha
Nouvelle image

Commentaires (0)