English dropdown-ico

Manual Buffalo Tools GEN154

24 pages 1.99 mb
Download

Go to site of 24

Summary
  • Buffalo Tools GEN154 - page 1

    GEN154 2000 Surge Watts / 1500 Running Watts PORTABLE GENERATOR INSTRUCTION MANUAL READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These in structions are not meant to cover every possible ...

  • Buffalo Tools GEN154 - page 2

    GEN154 2000 Surge Watts / 1500 Running Watts Portable Generator FEATURES: • 4-Stroke OHV Engine • Recoil Start • 2.4 HP Gasoline Engine • Automatic Low Oil Shutdown • 1 - 120 Volt A/C Outlet • 1 - 12 Volt D/C Outlet • 1.8 Gallon Fuel Tank • Engine Run Time: 9 Hours @ 50% Load • 2000 Surge Watts / 1500 Running Watts • EPA Approve ...

  • Buffalo Tools GEN154 - page 3

    GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 3 TABLE OF CONTENTS RECOGNIZE SAFETY SYMBOL S, WORDS AN D LABELS..................................................................................... ......... 4 PACKAGE CONTENTS PACKAGE CONTEN TS ........................................................................................... ...

  • Buffalo Tools GEN154 - page 4

    RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS What You Need to Know About Safety Instructions Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when operating or cleaning tools and equipment. Always contact yo ...

  • Buffalo Tools GEN154 - page 5

    Notice Regarding Emissions: Engines certified to comply with California and U.S. EPA emissi on regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gasoline and may include the following emission c ontrol systems: Three-Way Catalyst (TWC) (if equipped), and E ngine Modifications (EM). Legal Requirements: Fede ...

  • Buffalo Tools GEN154 - page 6

    Powerful Voltage: This generator produces powerful voltage, which can result in electrocution. • ALWAYS ground this generator before using it. (See “Ground the Generator” section in this manual). • Only electrical devices should be plugged in to this generator, either directly or with an extension cord. NEVER connect a bui lding electrical ...

  • Buffalo Tools GEN154 - page 7

    GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 7 ...

  • Buffalo Tools GEN154 - page 8

    In addition to the previously described safety information, fam iliarize yourself with all safety and hazard placards on this ge nerator. GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 8 ...

  • Buffalo Tools GEN154 - page 9

    PACKAGE CONTENTS The following items are supplied with this Model GEN154 2000 Sur ge Watts / 1500 Running Watts Portable Generator. Verify that a ll items are included. STOP! If there are missing items, call 1-888-287-6981, Monday - Friday, 8 AM - 4 PM Central Time for customer service. DO NOT RETURN THIS GENERATOR TO THE RETAILER. Item List: NEMA ...

  • Buffalo Tools GEN154 - page 10

    GENERATOR COMPONENTS Observe the locations and functions of the various components and controls of this generator. 1 1) Fuel Tank Cap 2) Control Panel 3) Grounding Terminal 4) Oil Access 5) Recoil Starter 6) Carburetor Choke Lever 7) Fuel Cock 2 3 5 6 7 8) Ignition Switch 9) DC Circuit Fuse 10) AC Circuit Fuse 11) 120 Volt AC Output Socket 12) 12 V ...

  • Buffalo Tools GEN154 - page 11

    PREPARING THE GENERATOR FOR USE Using this Generator for the First-Time STOP! The following section describes the required steps for preparing this generator for the first use. Failure to correctly perform these steps can damage this generator and/or shorten its life. If still unsur e about how to perform any of these steps after reading this s ect ...

  • Buffalo Tools GEN154 - page 12

    Step 2 - Add Gasoline Gasoline and gasoline fumes are highly flammable and explosive. Handling fuel can result in serious injury or burns. • Do not fill the fuel tank near a heat, sparks or an open flame. Keep gasoline away from appliance pilot lights, barbecues, el ectric appliances, power tools, etc. • Do not overfill the fuel tank. Always ch ...

  • Buffalo Tools GEN154 - page 13

    Subsequent Use of this Generator For subsequent uses of this generator after the first use, certain steps still must be completed to prepare it for operation. IMPORTANT: Be familiar with the procedures described in the previous section titled “Using the Generator for the First Time” of this manual. If not, review this section now. Step 1 - Veri ...

  • Buffalo Tools GEN154 - page 14

    STARTING THE GENERATOR STOP! Before starting this generator, confirm that all the steps in the section titled, “Preparing the Generator for Use,” of this ma nual have been correctly completed. If unsure about how to perform any of these steps, call 1-888-287-6981, Monday - Friday, 8 AM - 4 PM Centr al Time for customer service. Disconnect all e ...

  • Buffalo Tools GEN154 - page 15

    USING THE GENERATOR • USE THIS GENERATOR ONLY OUTDOORS IN NON-CONFINED AREAS. DO NOT SECURE THE GENERATOR WITH A CHAIN OR ROPE, AS THIS WILL MAKE IT DIFFICULT TO MOVE IN AN EMERGENCY. • Keep at least several feet of clearance on all si des to allow proper ventilation for this generator. After the engine has been running for several minutes, ele ...

  • Buffalo Tools GEN154 - page 16

    Connect only electrical devices that are in good working order. Faulty devices or power cords present the risk of electrical sh ock. Immediately turn off and disconnect any d evice that commences to operate abnormally, sl uggish or abruptly stops. Determine if t he problem was the device or the rated load cap acity of this generator has been exceed ...

  • Buffalo Tools GEN154 - page 17

    SOME NOTES ABOUT POWER CORDS Long or thin cords can require more wattage from a generator to power an electrical device. Figure 6 shows the recommended cord s according to the power requirement of the electrical device. When using cord s that exceed these specifications, allow for the electrical dev ice to have a slightly higher rated wattage requi ...

  • Buffalo Tools GEN154 - page 18

    STOPPING THE GENERATOR To stop this generator: 1. Turn off all connected electrical devices and then unplug them. 2. Switch the circuit breaker to the “OFF” position. 3. Allow this generator to run for several more minutes with no electrical devices connected to help stabilize the temperature of this generator. 4. Set the engine switch to the ? ...

  • Buffalo Tools GEN154 - page 19

    Checking the Oil Level It is important to check the oil level in the engine crankcase before each use to ensure that there is a sufficient quantity. To check the oil level: 1. Verify that this generator is shut down and on a level surface. 2. Unscrew the oil filler/dipstick cap from the engine. 3. With a dry cloth, wipe the oil off of the dipstick ...

  • Buffalo Tools GEN154 - page 20

    Air Filter Maintenance Routine maintenance of the air filter helps maintain proper airflow to the carburetor. Occasionally verify that the air filter is free of excessive dirt. The air filter will require more frequent cleaning when oper ating this generator in extremely dusty areas. To clean air filter, remove from generator. Wash in kerosene. Pou ...

  • Buffalo Tools GEN154 - page 21

    STORAGE/TRANSPORT PROCEDURES Never place any type of storage cover on this generator while it is still hot. When transporting or storing this generator for extended time: • Allow generator to fully cool before moving it. A hot engi ne and exhaust system can burn you and ignite some materials. • Empty the fuel tank. (See “Emptying the F uel Ta ...

  • Buffalo Tools GEN154 - page 22

    GEN154 2000 SURGE WATTS / 1500 RUNNING WATTS PORTABLE GENERATOR PARTS DIAGRAM GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 22 ...

  • Buffalo Tools GEN154 - page 23

    GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 23 GEN154 2000 SURGE WATTS / 1500 RUNNING WATTS PORTABLE GENERATOR PARTS LIST No. Part Name Part Number Qty No. Part Name Part Number Qty 1 Bolt GB5789 M5*8 2 46 Washer GB95 8 2 2 Absorber Set GR1000 A-04.00 2 47 Nut GB/T6184 M8 2 3 Control Panel GR1000 A-05.00 1 48 Cover 1 4 Cover 2 49 ...

  • Buffalo Tools GEN154 - page 24

    GEN1540809 GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 24 ...

Manufacturer Buffalo Tools Category Portable Generator

Documents that we receive from a manufacturer of a Buffalo Tools GEN154 can be divided into several groups. They are, among others:
- Buffalo Tools technical drawings
- GEN154 manuals
- Buffalo Tools product data sheets
- information booklets
- or energy labels Buffalo Tools GEN154
All of them are important, but the most important information from the point of view of use of the device are in the user manual Buffalo Tools GEN154.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Buffalo Tools GEN154, service manual, brief instructions and user manuals Buffalo Tools GEN154. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Buffalo Tools GEN154.

Similar manuals

A complete manual for the device Buffalo Tools GEN154, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Buffalo Tools GEN154 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Buffalo Tools GEN154.

A complete Buffalo Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Buffalo Tools GEN154 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Buffalo Tools GEN154, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Buffalo Tools GEN154, that we can find in the current document
3. Tips how to use the basic functions of the device Buffalo Tools GEN154 - which should help us in our first steps of using Buffalo Tools GEN154
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Buffalo Tools GEN154
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Buffalo Tools GEN154 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Buffalo Tools GEN154?

Use the form below

If you did not solve your problem by using a manual Buffalo Tools GEN154, ask a question using the form below. If a user had a similar problem with Buffalo Tools GEN154 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)