Italiano dropdown-ico

Manuale per l’uso Buffalo Tools GEN154

24 pagine 1.99 mb
Scarica

Vai alla pagina of 24

Summary
  • Buffalo Tools GEN154 - page 1

    GEN154 2000 Surge Watts / 1500 Running Watts PORTABLE GENERATOR INSTRUCTION MANUAL READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance. Every effort has been made to ensure the accuracy of this manual. These in structions are not meant to cover every possible ...

  • Buffalo Tools GEN154 - page 2

    GEN154 2000 Surge Watts / 1500 Running Watts Portable Generator FEATURES: • 4-Stroke OHV Engine • Recoil Start • 2.4 HP Gasoline Engine • Automatic Low Oil Shutdown • 1 - 120 Volt A/C Outlet • 1 - 12 Volt D/C Outlet • 1.8 Gallon Fuel Tank • Engine Run Time: 9 Hours @ 50% Load • 2000 Surge Watts / 1500 Running Watts • EPA Approve ...

  • Buffalo Tools GEN154 - page 3

    GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 3 TABLE OF CONTENTS RECOGNIZE SAFETY SYMBOL S, WORDS AN D LABELS..................................................................................... ......... 4 PACKAGE CONTENTS PACKAGE CONTEN TS ........................................................................................... ...

  • Buffalo Tools GEN154 - page 4

    RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS What You Need to Know About Safety Instructions Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when operating or cleaning tools and equipment. Always contact yo ...

  • Buffalo Tools GEN154 - page 5

    Notice Regarding Emissions: Engines certified to comply with California and U.S. EPA emissi on regulations for SORE (Small Off Road Equipment) are certified to operate on regular unleaded gasoline and may include the following emission c ontrol systems: Three-Way Catalyst (TWC) (if equipped), and E ngine Modifications (EM). Legal Requirements: Fede ...

  • Buffalo Tools GEN154 - page 6

    Powerful Voltage: This generator produces powerful voltage, which can result in electrocution. • ALWAYS ground this generator before using it. (See “Ground the Generator” section in this manual). • Only electrical devices should be plugged in to this generator, either directly or with an extension cord. NEVER connect a bui lding electrical ...

  • Buffalo Tools GEN154 - page 7

    GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 7 ...

  • Buffalo Tools GEN154 - page 8

    In addition to the previously described safety information, fam iliarize yourself with all safety and hazard placards on this ge nerator. GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 8 ...

  • Buffalo Tools GEN154 - page 9

    PACKAGE CONTENTS The following items are supplied with this Model GEN154 2000 Sur ge Watts / 1500 Running Watts Portable Generator. Verify that a ll items are included. STOP! If there are missing items, call 1-888-287-6981, Monday - Friday, 8 AM - 4 PM Central Time for customer service. DO NOT RETURN THIS GENERATOR TO THE RETAILER. Item List: NEMA ...

  • Buffalo Tools GEN154 - page 10

    GENERATOR COMPONENTS Observe the locations and functions of the various components and controls of this generator. 1 1) Fuel Tank Cap 2) Control Panel 3) Grounding Terminal 4) Oil Access 5) Recoil Starter 6) Carburetor Choke Lever 7) Fuel Cock 2 3 5 6 7 8) Ignition Switch 9) DC Circuit Fuse 10) AC Circuit Fuse 11) 120 Volt AC Output Socket 12) 12 V ...

  • Buffalo Tools GEN154 - page 11

    PREPARING THE GENERATOR FOR USE Using this Generator for the First-Time STOP! The following section describes the required steps for preparing this generator for the first use. Failure to correctly perform these steps can damage this generator and/or shorten its life. If still unsur e about how to perform any of these steps after reading this s ect ...

  • Buffalo Tools GEN154 - page 12

    Step 2 - Add Gasoline Gasoline and gasoline fumes are highly flammable and explosive. Handling fuel can result in serious injury or burns. • Do not fill the fuel tank near a heat, sparks or an open flame. Keep gasoline away from appliance pilot lights, barbecues, el ectric appliances, power tools, etc. • Do not overfill the fuel tank. Always ch ...

  • Buffalo Tools GEN154 - page 13

    Subsequent Use of this Generator For subsequent uses of this generator after the first use, certain steps still must be completed to prepare it for operation. IMPORTANT: Be familiar with the procedures described in the previous section titled “Using the Generator for the First Time” of this manual. If not, review this section now. Step 1 - Veri ...

  • Buffalo Tools GEN154 - page 14

    STARTING THE GENERATOR STOP! Before starting this generator, confirm that all the steps in the section titled, “Preparing the Generator for Use,” of this ma nual have been correctly completed. If unsure about how to perform any of these steps, call 1-888-287-6981, Monday - Friday, 8 AM - 4 PM Centr al Time for customer service. Disconnect all e ...

  • Buffalo Tools GEN154 - page 15

    USING THE GENERATOR • USE THIS GENERATOR ONLY OUTDOORS IN NON-CONFINED AREAS. DO NOT SECURE THE GENERATOR WITH A CHAIN OR ROPE, AS THIS WILL MAKE IT DIFFICULT TO MOVE IN AN EMERGENCY. • Keep at least several feet of clearance on all si des to allow proper ventilation for this generator. After the engine has been running for several minutes, ele ...

  • Buffalo Tools GEN154 - page 16

    Connect only electrical devices that are in good working order. Faulty devices or power cords present the risk of electrical sh ock. Immediately turn off and disconnect any d evice that commences to operate abnormally, sl uggish or abruptly stops. Determine if t he problem was the device or the rated load cap acity of this generator has been exceed ...

  • Buffalo Tools GEN154 - page 17

    SOME NOTES ABOUT POWER CORDS Long or thin cords can require more wattage from a generator to power an electrical device. Figure 6 shows the recommended cord s according to the power requirement of the electrical device. When using cord s that exceed these specifications, allow for the electrical dev ice to have a slightly higher rated wattage requi ...

  • Buffalo Tools GEN154 - page 18

    STOPPING THE GENERATOR To stop this generator: 1. Turn off all connected electrical devices and then unplug them. 2. Switch the circuit breaker to the “OFF” position. 3. Allow this generator to run for several more minutes with no electrical devices connected to help stabilize the temperature of this generator. 4. Set the engine switch to the ? ...

  • Buffalo Tools GEN154 - page 19

    Checking the Oil Level It is important to check the oil level in the engine crankcase before each use to ensure that there is a sufficient quantity. To check the oil level: 1. Verify that this generator is shut down and on a level surface. 2. Unscrew the oil filler/dipstick cap from the engine. 3. With a dry cloth, wipe the oil off of the dipstick ...

  • Buffalo Tools GEN154 - page 20

    Air Filter Maintenance Routine maintenance of the air filter helps maintain proper airflow to the carburetor. Occasionally verify that the air filter is free of excessive dirt. The air filter will require more frequent cleaning when oper ating this generator in extremely dusty areas. To clean air filter, remove from generator. Wash in kerosene. Pou ...

  • Buffalo Tools GEN154 - page 21

    STORAGE/TRANSPORT PROCEDURES Never place any type of storage cover on this generator while it is still hot. When transporting or storing this generator for extended time: • Allow generator to fully cool before moving it. A hot engi ne and exhaust system can burn you and ignite some materials. • Empty the fuel tank. (See “Emptying the F uel Ta ...

  • Buffalo Tools GEN154 - page 22

    GEN154 2000 SURGE WATTS / 1500 RUNNING WATTS PORTABLE GENERATOR PARTS DIAGRAM GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 22 ...

  • Buffalo Tools GEN154 - page 23

    GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 23 GEN154 2000 SURGE WATTS / 1500 RUNNING WATTS PORTABLE GENERATOR PARTS LIST No. Part Name Part Number Qty No. Part Name Part Number Qty 1 Bolt GB5789 M5*8 2 46 Washer GB95 8 2 2 Absorber Set GR1000 A-04.00 2 47 Nut GB/T6184 M8 2 3 Control Panel GR1000 A-05.00 1 48 Cover 1 4 Cover 2 49 ...

  • Buffalo Tools GEN154 - page 24

    GEN1540809 GEN154 2000 Surge Watts/1500 Running Watts Portable Generator 24 ...

Fabbricante Buffalo Tools Categoria Portable Generator

I documenti che otteniamo dal fabbricante del dispositivoBuffalo Tools GEN154 possono essere suddivisi in diversi gruppi. Questi sono tra gli altri:
- disegni tecnici Buffalo Tools
- manuali per l’uso GEN154
- schede prodotto Buffalo Tools
- opuscoli
- o etichette energetiche Buffalo Tools GEN154
Tutti sono importanti, ma le informazioni più importanti dal punto di vista di utilizzo del dispositivo possono essere trovate nel manuale per l’uso Buffalo Tools GEN154.

Un gruppo di documenti denominato manuali per l’uso, è anche suddiviso in tipi più specifici, come: Manuali di installazione Buffalo Tools GEN154, manuali di manutenzione, brevi manuali o manuali utente Buffalo Tools GEN154. A seconda delle esigenze, si dovrebbe cercare il documento necessario. Nel nostro sito web, puoi visualizzare il manuale più popolare per l'uso del prodotto Buffalo Tools GEN154.

Manuali per l’uso simili

Manuale completo del dispositivo Buffalo Tools GEN154, come deve essere?
Il manuale per l’uso, denominato anche istruzioni per l’uso, o semplicemente il manuale è un documento tecnico progettato per aiutare ad utilizzare Buffalo Tools GEN154 dagli utenti. I manuali sono di solito scritti da uno scrittore tecnico, ma in un linguaggio accessibile a tutti gli utenti Buffalo Tools GEN154.

Il manuale per l’uso completo Buffalo Tools, dovrebbe includere vari elementi di base. Alcuni di loro sono meno importanti, come ad esempio: copertina / pagina del titolo o pagina di autore. Tuttavia, la parte rimanente, dovrebbe fornire informazioni importanti dal punto di vista dell'utente.

1. Introduzione e la guida su come utilizzare il manuale Buffalo Tools GEN154 - All'inizio di ogni manuale, dovremmo trovare indizi su come utilizzare il documento. Dovrebbe contenere informazioni sulla posizione dell’indice Buffalo Tools GEN154, FAQ o i problemi più comuni : i punti che sono più spesso cercati dagli utenti di ogni manuale
2. Indice - elenco di tutti i suggerimenti per Buffalo Tools GEN154 che possono essere trovati nel documento corrente
3. Suggerimenti su come utilizzare le funzioni di base del dispositivo Buffalo Tools GEN154 - che ci dovrebbe aiutare nei primi passi durante l'uso Buffalo Tools GEN154
4. Troubleshooting - sequenza sistematica delle attività che vi aiuterà a diagnosticare e, successivamente, risolvere i problemi più importanti del Buffalo Tools GEN154
5. FAQ - domande più frequenti
6. Dettagli di contatto Informazioni su dove cercare il contatto con il fabbricante / servizio Buffalo Tools GEN154 in un dato paese, se il problema non può essere risolto da noi stessi.

Hai una domanda su Buffalo Tools GEN154?

Utilizza il modulo sottostante

Se non hai risolto il problema con Buffalo Tools GEN154 con l'aiuto del manuale che hai trovato, fai una domanda utilizzando il modulo sottostante. Se un utente ha avuto un problema simile con Buffalo Tools GEN154 è probabile che voglia condividere il modo di risolverlo.

Riscrivi il testo dall’immagine

Captcha
Nuova immagine

Commenti (0)