Manuel d’utilisation Alvarez N/A

15 pages 0.86 mb
Télécharger

Aller à la page of 15

Summary
  • Alvarez N/A - page 1

    1 S225 REPAIR MANUAL S225 REPAIR MANUAL ...

  • Alvarez N/A - page 2

    2 These instructions are intended to help restore any ailing S225 Passive Loudspeaker back to factory working conditions. They show how to remove and replace the drivers. Please contact Mackie Technical Support (1-800-898-3211) to receive a Service Request Number and Order Number for parts needed for this restoration. They will also help you determ ...

  • Alvarez N/A - page 3

    3 Bottom woofer replacement: 1 1 Five screws need to be removed from each side of the grill (ten screws total) using the phillips head screwdriver. A fl at head screwdriver may aid in loosening the grill if it is sticking. 8 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 9 9 10 10 2 2 Keep the ten screws in a safe place. 1 1 3 3 2 2 4 4 3 3 Four screws need to be ...

  • Alvarez N/A - page 4

    4 4 4 Carefully begin to remove the woofer. This woofer has a tendency to want to pop out, so please be sure to hold the woofer in place with your free hand while removing the screws with the other hand. Caution: The woofer is approximately 10 pounds with the weight unevenly distributed. Bottom woofer replacement continued: 5 5 The positive (solid ...

  • Alvarez N/A - page 5

    5 6 6 The picture above shows what the S225 looks like with the grill and bottom woofer removed. Place the new woofer (part #0010658) where the old one was. Follow the same steps as above, but backwards 5 to 1. Power up the S225 and the new woofer should now be pumping out glorious lows. Awesome, you just replaced a 15” woofer! Bottom woofer repl ...

  • Alvarez N/A - page 6

    6 Top woofer replacement: 1 1 Five screws need to be removed from each side of the grill (ten screws total) using the phillips head screwdriver. A fl at head screwdriver may aid in loosening the grill if it is sticking. 8 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 9 9 10 10 2 2 Keep the ten screws in a safe place. 1 1 3 3 2 2 4 4 3 3 Four screws need to be rem ...

  • Alvarez N/A - page 7

    7 Top woofer replacement continued: 4 4 Carefully begin to remove the woofer. This woofer has a tendency to want to pop out, so please be sure to hold the woofer in place with your free hand while removing the screws with the other hand. Caution: The woofer is approximately 10 pounds with the weight unevenly distributed. 5 5 The positive (solid yel ...

  • Alvarez N/A - page 8

    8 Top woofer replacement continued: 6 6 The picture above shows what the S225 looks like with the grill and top woofer removed. Place the new woofer (part #0010658) where the old one was. Follow the same steps as above, but backwards 5 to 1. Power up the S225 and the new woofer should now be pumping out glorious lows. Awesome, you just replaced a 1 ...

  • Alvarez N/A - page 9

    9 High Frequency Driver replacement: 1 1 Five screws need to be removed from each side of the grill (ten screws total) using the phillips head screwdriver. A fl at head screwdriver may aid in loosening the grill if it is sticking. 8 8 1 1 2 2 3 3 4 4 5 5 6 6 7 7 9 9 10 10 2 2 Keep the ten screws in a safe place. 3 3 Four screws and fl at washers ...

  • Alvarez N/A - page 10

    10 4 4 Carefully begin to remove the entire horn assembly (with the high frequency driver still attached). A fl at head screwdriver may aid in loosening the horn assembly by prying between it and the cabinet. Hold the horn assembly in place with one hand while prying around the edge with your free hand. Caution: The horn weighs about 5 pounds, and ...

  • Alvarez N/A - page 11

    11 High Frequency Driver replacement continued: 7 7 Four nuts and eight washers may be removed from the driver using the 8mm open end wrench. Turn counter- clockwise to loosen and remove, clockwise to tighten. The other three are located around the horn assembly. Lift the horn up as the nuts are loosened. It cannot be removed otherwise. Notice that ...

  • Alvarez N/A - page 12

    12 High Frequency Driver replacement continued: 10 10 This is what the high frequency driver looks like removed from the horn assembly. Four headless screws need to be removed from the driver. Pliers could help if the screws are too tight. Turn counter- clockwise to loosen and remove, clockwise to tighten. 11 11 Keep the four headless screws in a s ...

  • Alvarez N/A - page 13

    13 3 3 The horn assembly is shown above with the high frequency driver circled. Four screws need to be removed from the driver using the 3mm allen wrench. 4 4 Keep the four screws in a safe place. 5 5 The diaphragm and plate adapter are easily removed from the horn assembly. Notice the terminal locations in relation to the indents of the high frequ ...

  • Alvarez N/A - page 14

    14 7 7 This is what the plate adapter (left) and diaphragm (right) both look like. Place the new diaphragm (part # coming soon) where the old one was. Follow the same steps as above, but backwards 6 to 1. Power up the S225 and the new diaphragm should now be pumping out those highs again. Sweet, you just replaced a diaphragm! Diaphragm replacement ...

  • Alvarez N/A - page 15

    15 This page left blank intentionally ...

Fabricant Alvarez Catégorie Car Speaker

Les documents que nous recevons du fabricant de l'appareilAlvarez N/A peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Alvarez
- manuels d’utilisations N/A
- fiches produit Alvarez
- dépliants
- ou étiquettes-énergie Alvarez N/A
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Alvarez N/A.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Alvarez N/A, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Alvarez N/A. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Alvarez N/A.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Alvarez N/A, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Alvarez N/A par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Alvarez N/A.

Le manuel d’utilisation complet Alvarez, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Alvarez N/A - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Alvarez N/A, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lAlvarez N/A qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Alvarez N/A - qui devraient nous aider dans les premières étapes lors de l'utilisation Alvarez N/A
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Alvarez N/A
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Alvarez N/A dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Alvarez N/A?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Alvarez N/A, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Alvarez N/A il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)