Manuel d’utilisation Sigma EF-530

12 pages 0.32 mb
Télécharger

Aller à la page of 12

Summary
  • Sigma EF-530 - page 1

    14 ENGLISH Thank you very much for purchasing the Sigm a EF-530 DG SUPER EO-TTL II Electronic Flash. This product is specifically developed for the Canon E OS series SLR cameras. Depending on the camera model, functions and operation may vary . Please read this instruction booklet carefully . T o add to your enjoyment of photography , the flash has ...

  • Sigma EF-530 - page 2

    15 DESCRIPTION OF THE P ARTS EXTERNAL P ARTS 1.Flash Head 2.Built-in Wide Panel 3.AF Auxiliary Light 4.Bounce Angle; Up and Down 5.Bounce Angle; Right and Left 6.B ounce Lock and Release Button; Up and Down 7.Swivel Lock and Release Button; Right and Left 8.LCD Panel 9.Battery Cover 10.Shoe Ring 1 1.Shoe CONTROLS 12.MODE Button 13.<S EL> SELE ...

  • Sigma EF-530 - page 3

    16 If it still blinks after this procedure, check the battery power. ADJUSTING THE FLASH HEAD Depress the Bounce “Up and Down” Lock and Releas e Button and adjust the flash head to the desired positio n. ◆ If appears on the LCD panel when you turn on the flash, and if t his mark blinks, then the flash head is adjusted to an incor rect positio ...

  • Sigma EF-530 - page 4

    17 2. Turn on the power switch of the flash, the ETTL (TTL) mark will appear on the LCD panel and the flash will start charging. 3. Focus on your subject. 4. Check that the sub ject is located within the effective distance range indicated on the LCD panel. 5. Press the shutter button, after the flash is fully charged. Note : When the flash is fully ...

  • Sigma EF-530 - page 5

    18 5. The manual flash output display will stop blinking and remain displayed after you press the SEL button again. 6. Adjust t he focusing by pressing the shutt er button, note the subjec t distance on the focus ring on the lens. Then adjust the lens’ aperture value or flash power level until the distance indicated on the LCD panel of the flashg ...

  • Sigma EF-530 - page 6

    19 FE LOCK “FE” lock mode allows you to choose and lock the exposure before taking the picture. 1. Set the camera’s exposure mode (“P”, “T v”, “Av”, “M” or “DEP”). 2. Set the flash’s mode to the E-TTL or the High S peed S ync. 3. Focus on the subject 4. Focus on the subject in the center AF frame of the viewfinder , and ...

  • Sigma EF-530 - page 7

    20 MUL TI FLASH MODE While the shutter is open, the flash will fire repeatedly . By doing so a series of images of the subject will be exposed in one frame. A bright subject with a dark background shows more effectively in this mode. It is possible to set the firing frequency between 1Hz and 199H z. Up to 100 flashe s can be fired continuousl y . T ...

  • Sigma EF-530 - page 8

    21 Channel Setting When other people are using Wireless Flash mode near you, your flash m ay be connected with the other person’s flash and your flash may fire. In this circumstance, please set a different channel for your flash from that of the other person’s . Channel setting for Master unit 1. Press the MODE button to Select the mar k. 2. Pr ...

  • Sigma EF-530 - page 9

    22 ◆ If the flash ratio is indicated as or , press the + or - button until 1:1 is displayed. 4. Place the Slave Unit at the desire d position. 5. Make sure that the Master Un it and Slave Unit have both been charged. ◆ Master Unit’s Ready Light is lit and Slave Unit’s AF Auxiliary Light is blinking. 6. Focus on the subject and take the pict ...

  • Sigma EF-530 - page 10

    23 Wireless Flash Exposure Compensation 1. Please set master flash unit to the Wireless Flash Mode. 2. Press the SEL button to make mark blink. 3. Press the + or - button to set the flash exposure comp ensation amount. 4. Press the SEL button several times to m ake exposure compensation indicator appear. ◆ It is not necessary to make any addition ...

  • Sigma EF-530 - page 11

    24 ◆ If there are only two slave units, please se lect the indicator at step 3 ( step 9 and step 10 should be omitted). Wireless Multi Flash Set the master flash unit as follows. 1. Follow the procedure for Changing the Wireless M ode , and set to the MUL TI / mar k. 2. Press the SEL button to make the firing fre quency display blink. 3. Press ...

  • Sigma EF-530 - page 12

    25 Designated Slave Flash If using two or more EF-530 DG Super fla sh units, you can designate which flash will fire together by using the channel settings. In this mode, one flash unit will be used as the S lave Controller and the others for firing as Slaves. Setting the Slave Flash unit(s) for firing 1. Attach the slave unit to the camera body . ...

Fabricant Sigma Catégorie Camera Flash

Les documents que nous recevons du fabricant de l'appareilSigma EF-530 peuvent être divisés en plusieurs groupes. Ceux-ci sont, entre autres:
- dessins techniques Sigma
- manuels d’utilisations EF-530
- fiches produit Sigma
- dépliants
- ou étiquettes-énergie Sigma EF-530
Tous sont importants, mais les informations les plus importantes du point de vue de l'utilisation de l'appareil se trouvent dans le manuel d’utilisation Sigma EF-530.

Un groupe de documents appelé manuels d’utilisation est également divisé en types plus spécifiques, tels que: Manuels d’installation Sigma EF-530, manuels d’entretien, brefs manuels ou manuels de l’utilisateur Sigma EF-530. Selon vos besoins, vous devriez chercher le document dont vous avez besoin. Sur notre site, vous pouvez voir le manuel le plus populaire d’utilisation du produit Sigma EF-530.

Manuels d’utilsiation similaires

Manuel d’utilisation complet de l’appareil Sigma EF-530, quelle devrait-elle être?
Le manuel d’utilisation, également appelé le mode d’emploi, ou tout simplement le manuel, est un document technique destiné à aider à utiliser Sigma EF-530 par les utilisateurs. Des manuels sont généralement écrits par un rédacteur technique, mais dans un langage accessible à tous les utilisateurs Sigma EF-530.

Le manuel d’utilisation complet Sigma, devrait inclure plusieurs éléments de base. Certains d'entre eux sont moins importants, tels que: la couverture / page de titre ou pages d'auteur. Cependant, la partie restante, devrait nous fournir des informations importantes du point de vue de l'utilisateur.

1. Introduction et des conseils sur la façon d'utiliser le manuel Sigma EF-530 - Au début de chaque manuel, nous devrions trouver des indices sur la façon d'utiliser le document. Il doit contenir des informations sur l'emplacement de la table des matières Sigma EF-530, FAQ ou des problèmes les plus fréquents - les points qui sont les plus souvent recherchés par les utilisateurs de chaque manuel
2. Table des matières - index de tous les conseils pour lSigma EF-530 qui peuvent être trouvés dans le document courant
3. Conseils sur la façon d'utiliser les fonctions de base de l’appareil Sigma EF-530 - qui devraient nous aider dans les premières étapes lors de l'utilisation Sigma EF-530
4. Troubleshooting - séquence systématique des activités qui nous aideront à diagnostiquer et ensuite résoudre les principaux problèmes de Sigma EF-530
5. FAQ - questions fréquemment posées
6. Détails du contact Informations sur l'endroit où chercher le contact avec le fabricant / service Sigma EF-530 dans un pays donné, si le problème ne peut être résolu par nous-mêmes.

Avez-vous une question à propos de Sigma EF-530?

Utiliser le formulaire ci-dessous

Si vous n’avez pas résolu votre problème avec Sigma EF-530, avec l'aide du manuel que vous avez trouvé, posez une question en utilisant le formulaire ci-dessous. Si un utilisateur a eu un problème similaire avec Sigma EF-530 il est probable qu’il a envie de partager la façon de le résoudre.

Réécrire le texte de l'image

Commentaires (0)